国内用户都知道不翻墙在国内是无法使用google相关服务的，同样需要在centos中安装google chrome更是没有可能。
我们要对 Richard Lloyd 的安装chrome的脚本进行更改，使我们在执行这个脚本时候能顺利进行。
我们需要系在他的原始脚本 http://chrome.richardlloyd.org.uk/install_chrome.sh，然后需要去除google.com和appspot.com这两个链接，直接在这两行前加“#”即可。
第二步就是下载google-chrome的rpm到/tmp/chrome_install/下，这是我分享在百度网盘google chrome 37, http://pan.baidu.com/share/link?shareid=3304350655&uk=17386172,如果你下载了更新的版本，需要在735行，将chrome_rpm="google-chrome-stable-37.0.2062.120-1.x86_64.rpm" 改成你的版本号即可.
第三步就是将下载的脚本chmod 777,然后执行 ./install_chrome.sh, 按照步骤执行即可。
下面是我用google-chrome-stable-37做的脚本，拷贝下来创建名为install_chrome.sh脚本，按照上面步骤执行即可安装google-chrome。
#! /bin/bash
# Google Chrome Installer/Uninstaller for RHEL/CentOS 6 or 7
# (C) Richard K. Lloyd 2015 <rklloyd@gmail.com>
# See http://chrome.richardlloyd.org.uk/ for further details.
# This script is in the public domain and has no warranty.
# It needs to be run as root because it installs/uninstalls RPMs.
# Minimum system requirements:
# - 32-bit or 64-bit RHEL/CentOS 6.6 or later
# (any 64-bit RHEL/CentOS 7 version is supported)
# - Minimum RHEL/CentOS 6 kernel version supported is 2.6.32-431.el6
# (any RHEL/CentOS 7 kernel version is supported)
# - At least 250MB free in each of the temporary directory, /opt and /root
# - A working yum system (including http proxy configured if needed)
# - http_proxy and https_proxy env vars set if you are using an http proxy
# - Google Chrome should not be running at the same time as this script
show_syntax()
# Show syntax of script
{
cat <<@EOF
Syntax: ./install_chrome.sh [-b] [-d] [-f [-f [-f]]] [-h] [-n] [-q] [-s]
[-t tmpdir] [-u] [-U]
-b (or --beta) will switch to beta versions (google-chrome-beta).
-d (or --delete) will delete the temporary directory used for downloads
if an installation was successful.
-f (or --force) forces an automatic "y" for any interactive prompting
except for OS mismatch/OS upgrade/reboot prompts. Specify -f twice to force
it for OS mismatches or OS upgrades as well and three times for reboots
on top of that.
-h (or -? or --help) will display this syntax message.
-n (or --dryrun) will show what actions the script will take,
but it won't actually perform those actions.
-q (or --quiet) will switch to "quiet mode" where minimal info is displayed.
Specify -q twice to go completely silent except for errors.
-s (or --stable) will switch to stable versions (google-chrome-stable),
which is the default if -b or -U haven't previously been specified.
-t tmpdir (or --tmpdir tmpdir) will use tmpdir as the temporary directory
parent tree rather than \$TMPDIR (if set) or /tmp.
-u performs an uninstallation of Google Chrome and chrome-deps-* rather the
default action of an installation.
-U (or --unstable) will switch to unstable versions (google-chrome-unstable).
@EOF
}
# Current version of this script
version="7.20"
# This script will download/install the following for an installation:
# These RHEL/CentOS 6 RPMs and their (many!) deps that aren't already installed:
# redhat-lsb, wget, xdg-utils, GConf2, libXSCrnSaver, libX11, gnome-keyring,
# gcc, glibc-devel, nss, rpm-build and rpmdevtools.
# These RHEL/CentOS 7 RPMs and their (many!) deps that aren't already installed:
# redhat-lsb, wget, xdg-utils, GConf2, libXSCrnSaver. libX11, gnome-keyring and nss.
# The latest Google Chrome RPM if not already downloaded (or out-of-date).
# 64-bit RHEL/CentOS 6 only: libstdc++ library from a gcc 5.1.0 source build.
# 32-bit RHEL/CentOS 6 only: libstdc++ RPM from CentOS 7.
# For RHEL/CentOS 6 only:
# It then copies the downloaded libstdc++ library into /opt/google/chrome*/lib.
# Next, it C-compiles a shared library that provides the "missing"
# gnome_keyring_attribute_list_new function that's installed as
# /opt/google/chrome*/lib/libgnome-keyring.so.0 and linked against a
# newly installed soft-link called
# /opt/google/chrome*/lib/link-to-libgmome-keyring.so.0 which in turn points
# to the system copy of libgmome-keyring.so.0.
# Finally, it creates and installs a chrome-deps-* RPM which includes the
# downloaded libstdc++ library, libgnome-keyring.so.0, the soft-link
# link-to-libgmome-keyring.so.0 and code to modify the
# google-chrome wrapper. (End of RHEL/CentOS 6 only actions)
# Note that you can't run Google Chrome as root - it stops you from doing so.
# Revision history:
# 7.20 - 7th June 2015
# - Warn about out-of-date kernels that will cause Google Chrome to crash
# and offer to update the kernel (and preferably reboot).
# - Fixed a yum repo path typo shown during a dry run (-n) (reported by John
# Stembridge).
# - Don't try to create a spec file if the dry run option -n is specified
# (also reported by John Stembridge).
# - Removed remove_redundant_libs() function - ironically, it's now redundant.
# 7.13 - 24th April 2015
# - Updated the downloadable 64-bit libstdc++.so.6 to one built from gcc 5.1.0.
# Sadly, the uncompressed library has bloated to being 60% bigger than the
# one created from gcc 4.9.2 :-(
# 7.12 - 10th April 2015
# - CentOS 7.0.1406 got abruptly shunted off to vault.centos.org this week,
# promptly completely breaking the 32-bit libstdc++ RPM download. Now the
# download looks at latest 7.1.1503 RPM on mirror.centos.org first and if
# that gets moved (which it eventually will be when 7.2 comes out), it looks
# at the latest 7.0.1406 update on vault.centos.org as a fallback.
# 7.11 - 23rd February 2015
# - Added a Provides: link to the spec file to avoid RPM dependency issues
# with the soft-link (thanks to Raymond Page for spotting the issue) and
# bumped chrome-deps-* RPM version to 3.11.
# 7.10 - 6th February 2015
# - The later libstdc++ works fine with LD_LIBRARY_PATH pointing to it when
# sub-processes are run, so we can finally stop using LD_PRELOAD and the
# unset_var.so shared library.
# - We still need the "missing" gnome_keyring_attribute_list_new function
# that's in later releases of libgnome-keyring.so.0, so build a library
# using that name with the function in it, but link it against a soft-link
# (link-to-libgnome-keyring.so.0 which soft-links to the system-installed
# copy of libgnome-keyring.so.0). Convoluted, but allows us to bring in
# both gnome_keyring_attribute_list_new and all the other library functions/
# symbols in at start-up.
# - Added gnome-keyring as a dependency just to make sure it's there before
# we go ahead with the machinations above.
# - 50% reduction in orphaned kitten-killing tendencies.
# 7.00 - 2nd February 2015
# - Raise minimum RHEL/CentOS 6 version required from 6.5 to 6.6. This is
# because 6.6 now has library updates that negate the need to install patched
# versions from Fedora 15 or 17.
# - The only external library that has to remain is libstdc++, which provides
# the appropriate runtime symbols to satisfy the Google Chrome binary. The
# good news is that it no longer needs to be patched. For 64-bit systems,
# the libstdc++ is lifted by me from a gcc 4.9.2 source build I did.
# For 32-bit systems, libstdc++ is extracted from the CentOS 7 libstdc++ RPM.
# - If the updated CentOS 7 libstdc++ 32-bit RPM goes "missing" (e.g. it is
# removed because of an even newer update), fall back to the
# original 32-bit libstdc++ RPM that shipped with the initial CentOS 7 release.
# I will release a new script version if a libstdc++ (or gcc source) update
# happens of course.
# - Remove any unneeded /opt/google/chrome*/lib libraries that are probably
# hanging around from earlier script releases. For the avoidance of
# doubt, this includes removing the F15 libc library, thus removing the
# GHOST vulnerability that previous script releases may have had.
# - Use %_topdir for RPM build dir location (thanks to Bob Hepple for this)
# - Changed year to 2015 in a few places.
# - Now kills less orphaned kittens than ever!
# 6.10 - 29th August 2014
# - Don't permanently run 2 copies of cat from the google-chrome script
# (this is a horrible kludge intro'ed by Google Chrome 37). They both
# crashed with the previous (6.00) install_chrome.sh, so now just redirect
# stdout and stderr to /dev/null instead (OK, it'll hide console messages/
# errors, but that's better than 2 core dumps or, indeed, running 2 cats).
# - Added "Obsoletes: chrome-deps" to the RPM spec file (suggested by a
# couple of users).
# - Bumped both wrapper_mod_version and the chrome-deps RPM to version 2.10.
# 6.00 - 27th July 2014
# - Google Chrome 36 onwards now has separate install trees for each
# RPM type (stable, beta, unstable), but bizarrely all 3 RPMs include an
# /usr/bin/google-chrome soft-link, preventing simultaneous installation.
# Code was duly added to deal with this significant change.
# - Added PackageKit as a dependency (some live CentOS DVDs don't install it).
# - Removed the last remnants of the custom CentOS 7 repo code.
# - Used a soft-link to fix a failed grep of google-chrome.desktop during the
# installation of the beta or unstable RPM (this is a Google bug, not mine).
# - wrapper_mod_version changed to 2.00 and code added to scan for
# all 3 RPM types since the defaults for all 3 of them are dubiously
# stuck in a single /etc/default/google-chrome file.
# - Bumped chrome-deps-* version to 2.00 because check for google-chrome*
# binary path was widened and the RPM name has changed to include
# stable, beta or unstable as appropriate.
# - If an old "chrome-deps" RPM is present during (un)installation, remove it.
# 5.02 - 10th July 2014
# - Now CentOS 7 final is out, remove the pre-release repo code and
# delete the .repo file if it was created. Refusing to upgrade the OS to
# 6.5 or later will now terminate the script rather than continue with a
# warning. Changed all equivalent RHEL and CentOS references to be
# RHEL/CentOS instead.
# 5.01 - 26th June 2014
# - Fix for latest CentOS 7 pre-release repo detection, because the latest
# pre-release bizarrely includes placeholder .repo files that don't do
# anything.
# 5.00 - 21st June 2014
# - Added support for pre-release CentOS 7, which mainly means no RPM building
# and also the installation of missing dependencies. If no CentOS 7 repos are
# detected - which is the current case with pre-release CentOS 7 versions -
# in /etc/yum.repos.d, a "chrome-deps-updates" repo will be created (this
# will be removed on later runs if any other .repo files are created, on the
# assumption that the user has added their own repos for installing/updating
# RPMs instead or the final CentOS 7 repos are already present).
# - Minimum RHEL/CentOS 6 release supported is now 6.5, which has been out for
# over 6 months at the time of writing. This means libX11 and nss should be
# up-to-date versions, avoiding run-time problems with older versions of
# those packages.
# - Tidied up final messages e.g. it now says the latest version was already
# installed if that was the case.
#
# 4.70 - 17th May 2014
# - Added -f option to auto-force a "y" answer to any interactive prompt
# without bothering to actually prompt you (thanks to Steve Cleveland for the
# idea). The only exceptions to this are the prompts for an OS mismatch, OS
# upgrade or reboot, but even those can be forced by specifying -f twice (or
# three times for reboots).
# - Fixed the 2-hourly bash segfault recorded in syslog. It was caused by the
# chrome binary self-calling the google-chrome bash script to get its version,
# which is bizarre since surely it could just call one of its own functions
# to get that? By unsetting LD_LIBRARY_PATH on the self-call, the segfault
# was avoided. Bumped chrome-deps to version 1.21 because of this.
# 4.60 - 12th April 2014
# - The latest Google Chrome releases kept prompting me for a keyring
# password when starting up. It turns out they were using the
# gnome_keyring_attribute_list_new function, which didn't exist until Fedora
# 17's libgnome-keyring.so.0 library! Luckily, the F17 library works in
# RHEL/CentOS 6, so that's been added and the chrome-deps RPM has been
# bumped to version 1.20.
# - Added nss to the list of possible RHEL/CentOS 6 RPMs that are installed
# (thanks to Ravi Saive at tecmint.com for this, though no-one told me
# directly...).
# - Check the size and cksum of downloaded RPMs and delete them (and quit) if
# they are bad.
# 4.50 - 11th December 2013
# - A user reported that file-roller wouldn't work when opening downloaded
# .tar.gz files inside Google Chrome. It turns out LD_PRELOAD was still set
# when file-roller tried to exec() sub-processes like gzip, so I now unset
# LD_PRELOAD (as well as LD_LIBRARY_PATH) when exec'ing from within Google
# Chrome, which fixes the issue. chrome-deps version was bumped to 1.10
# because of this change. Another user suggested checking previously
# downloaded F15 RPMs have the right checksum/size (and a fresh download is
# forced if they don't), which has been implemented.
# 4.41 - 9th December 2013
# - Added glibc-devel to the list of dependencies because a user reported
# that it wasn't dragged in by gcc. With the imminent release of Fedora 20,
# Fedora 15 has been archived and the code has been changed to reflect that.
# Removed SELinux warning at end of install - the last few releases of
# Google Chrome don't seem to have a problem with enforcing mode w.r.t.
# nacl_helper. Future releases of this script may remove all SELinux-related
# code if enforcing mode remains OK. Google Chrome 31 is displaying a
# manifestTypes error to the console in some setups, but this doesn't seem
# to affect the running of Google Chrome.
# 4.40 - 5th October 2013
# - A similar issue to the 4.30 release cropped up again (reported by
# the same user!) that I still can't reproduce. This time it was a missing
# gdk_pixbuf_format_get_type symbol in F15's libgtk-x11-2.0. This was fixed
# by additionally downloading F15's gdk-pixbuf2 RPM and extracting
# libgdk_pixbuf-2.0 from it. This prompted a bump of the chrome-deps RPM to
# version 1.03.
# 4.30 - 4th October 2013
# - The g_desktop_app_info_get_filename symbol in the F15 libgdk-x11-2.0
# library is present in the F15 libgio-2.0 library (but not in RHEL/CentOS's).
# The script used the former library, but not the latter and a user reported
# a missing symbol crash due to this, despite my testing not showing the
# issue. This release is therefore purely to add libgio-2.0 and its
# libgobject-2.0 dependency to the set of extracted F15 libraries and has
# also been tested against Google Chrome 30 and Google Talk Plugin 4.7.0.0.
# The chrome-deps RPM is now at version 1.02 because of the two extra
# libraries.
# 4.20 - 22nd August 2013
# - If the Google Chrome repo is enabled and a Google Chrome RPM is already
# installed, use "yum check-update google-chrome-stable" to determine if
# there is a newer version available and then fallback to using the
# OmahaProxy site if there isn't.
# - Any newer version than what's been previously downloaded or installed
# can now be downloaded/installed, rather than being exactly the version
# displayed on the OmahaProxy site (which was out of date for a full day when
# Chrome 29 was released, stopping this script from updating to version 29).
# - Removed terminal messages warning because this is fixed with Google Chrome
# 29.
# - Used extra parameters in the OmahaProxy request to narrow the data down to
# the exact channel and platform (linux).
# 4.10 - 8th August 2013
# - Fixed Google Talk (Hangouts) plugin crash - it was because, unlike Google
# Chrome itself, the plugin hasn't been built with later libraries, so it
# needs LD_LIBRARY_PATH to be unset. There still appears to be other
# library issues with the Hangouts plugin, mainly because the older libraries
# don't implement certain calls it uses. Google need to update the plugin!
# Bumped chrome-deps version to 1.01 because of the unset_var.c change.
# - Catered for non-standard i686 RPM build trees on 32-bit systems. I couldn't
# reproduce this myself (it uses i386 for me all the time in RHEL/CentOS and
# Scientific Linux 32-bit VMs) but the code is in place anyway for the users
# that reported the issue.
# - modify_wrapper (now bumped to version 1.01) no longer echoes anything to
# stdout after a successful update of /opt/google/chrome/google-chrome.
# 4.01 - 30th July 2013
# - Emergency 2-char change fix due to a terrible spec parsing bug in rpmbuild.
# It appears that it tries to parse % directives in comment lines.
# Strangely, three different build envs of mine didn't have the bug, but
# a fourth one I tried did.
#
# 4.00 - 30th July 2013
# - Creates a new chrome-deps RPM that it installs alongside the
# google-chrome-stable RPM. It contains the Fedora libraries, the
# built unset_var.so library and a script which is run post-install
# to add code to /etc/default/google-chrome to modify google-chrome if
# its LD_PRELOAD addition isn't present. This gets sourced daily by
# /etc/cron.daily/google-chrome and is a way to auto-modify google-chrome
# within a day of a Google Chrome update (this is because google-chrome
# isn't marked as a config file by Google Chrome's spec file, so updates
# will overwrite any changes made to it). The new code will also enable the
# Google Chrome repo of course. Many thanks to Marcus Sandberg
# for his spec file at https://github.com/adamel/chrome-deps which
# I used as the initial basis for the spec file I create.
# - Adjusted unset_var code to not unset LD_LIBRARY_PATH if a full file
# path (i.e. one containing a slash) is supplied to exec*() routines.
# - Download/installation of google-chrome-stable/chrome-deps dependencies
# is now prompted for (if you decline, the script aborts).
# - Moved out-of-date OS check right to the end of the script and it also
# now offers to reboot the machine after a successful OS update. Warn user
# not to run Google Chrome if either the OS update or reboot are declined
# until they complete the OS update and reboot.
# - Don't remove /etc/cron.daily/google-chrome or
# /etc/yum.repos.d/google-chrome.repo any more because we actually want
# people to use those (they won't be happy cron'ing this script or having
# to regularly run it manually to check for updates).
# - Added -t option to specify the temporary directory parent tree.
# - Added -s (stable), -b (beta) and -U (unstable) options to switch
# release channels. Yes, it remembers the switch, so you only have to
# specify once time.
# - Added libdl.so.2 to the Fedora library list (for unset_var.so).
# 3.20 - 27th July 2013
# - Initial attempt to stop helper apps crashing by wrapping exec*() routines
# with LD_PRELOAD functions that save/blank LD_LIBRARY_PATH, call the
# original routines and, if they return, restore LD_LIBRARY_PATH. Seems to
# stop crashes previously logged to syslog on startup at least, but does
# require gcc and its dependencies to be installed now of course.
# 3.11 - 25th July 2013
# - If SELinux is enabled, set appropriate SELinux contexts on Fedora libraries
# in /opt/google/chrome/lib and that directory itself. Investigation shows
# that if you enable SELinux and set it to enforcing, nacl_helper appears to
# fail to start correctly, possibly disabling sandboxing. The script warns
# about this and suggests a temporary workaround of setting
# SELINUX=permissive in /etc/selinux/config and rebooting. It's hoped to fix
# this SELinux issue more permanently in a future release soon (any help is
# most welcome!).
# 3.10 - 24th July 2013
# - Use .so.0 extension (instead of .so.3) for renamed Fedora ld-linux library
# and change ld-linux*.so.2 references to ld-linux*.so.0 in ld-linux, libc
# and libstdc++. Thanks to Marcus Sundberg for this suggestion.
# - Dependency list for Google Chrome RPM is now redhat-lsb, wget, xdg-utils,
# GConf2, libXSCrnSaver and libX11 (not 1.3* or 1.4* though).
# - If OS version ("lsb_release -rs") is less than 6.4 then
# offer to "yum update" and refuse to continue if the user declines.
# If you don't update to at least 6.4, bad things can
# happen (I got a hang and a memory allocation error when starting Google
# Chrome on a RHEL/CentOS 6.0 VM for example).
# 3.00 - 21st July 2013
# - Command-line options now supported including -d (delete temp dir),
# -h (syntax help), -n (dry run), -q (quiet) and -u (uninstall).
# - Abort if Google Chrome is running when the script is started.
# - Display any non-zero disk space figures for /opt/google/chrome and the
# temporary download directory at the start and end of the script.
# 2.10 - 20th July 2013
# - Can now detect if Fedora 15 RPMs have been archived and will download
# them from the archive site if they're found there instead.
# - Fixed lsb package check, so lsb deps will actually be downloaded now.
# - Follow Fedora 15 library soft-links to determine the actual filenames
# that need to be copied.
# - Removed /etc/cron.daily/google-chrome and
# /etc/yum.repos.d/google-chrome.repo straight after the Google Chrome RPM
# is installed to avoid any potential conflict with old releases.
# - Simplistic check for RHEL/CentOS 6 derivatives (initially a prompt if the
# script thinks you aren't running one, but a future release will block
# non-derivatives).
# - Early exits due to errors or an interrupt (CTRL-C) will now properly
# tidy up files in the temporary directory and uninstall the Google Chrome
# RPM if it was installed.
# - All downloads now go via a common function, which saves any pre-existing
# file as a .old version and renames it back if the download fails.
# 2.00 - 14th July 2013
# - Installed a 32-bit RHEL/CentOS 6.4 VM and this enabled me to add initial
# 32-bit support, though there is an nacl_helper issue that I display a warning
# for. Thanks to Seva Epsteyn for a 32-bit patch that got the ball rolling.
# - Check for version number of latest Google Chrome and download/install it
# if it hasn't been already.
# - Use updated Fedora 15 RPMs rather than the original ISO versions.
# - Warn if an enabled Google Chrome repo is detected (we don't want it).
# - Tidied main code into separate functions.
# - Added blank lines before/after messages and prefixed them with three stars.
# - Displayed more messages now they're easier to read.
# 1.10 - 13th July 2013
# - Added an update check for a new version of this script.
# It will always download/install the new version, but will ask
# if you want to run the new version or exit in case you want to
# code inspect it first.
# - Always force-install a downloaded Google RPM, even if a version
# is already installed. Yes, very obvious it should do this but it
# didn't (slaps forehead).
# 1.02 - 13th July 2013
# - Second emergency fix today as someone spotted that wget needed
# "--no-check-certificate" to talk to Google's https download site.
# I didn't need it for the two machines I tested it on though!
# - Added in a check for wget as well while I was at it and it will
# yum install wget if it's not found.
# 1.01 - 13th July 2013
# - Bad variable fix if you've not downloaded Google Chrome's RPM yet.
# Serves me right for making a last minute change and not testing it :-(
# 1.00 - 13th July 2013
# - Tested on 64-bit RHEL/CentOS 6.4 using Fedora 15 libraries. Code is there
# for 32-bit but has not been tested at all because I have no such systems.
message_blank_line()
# $1 != "n" (and no quiet mode) to display blank line
{
if [ $quiet -eq 0 -a "$1" != "n" ]
then
echo
fi
}
message_output()
# Display $1 depending on the quiet mode
{
case "$quiet" in
0) echo "*** $1 ..." ;;
1) echo "$1" ;;
esac
}
message()
# Display a message (passed in $1) prominently
# $2 = "n" to avoid displaying blank lines before or after the message
{
if [ $quiet -eq 2 ]
then
return
fi
if [ $dry_run -eq 1 ]
then
echo "Would display the following message:"
message_output "$1"
echo
return
fi
message_blank_line "$2"
message_output "$1"
message_blank_line "$2"
}
warning()
# $1 = Warning message to display to stderr
# $2 = "n" to avoid displaying blank lines before or after the message
{
message "WARNING: $1" "$2" >&2
}
show_space_used()
# Calculate disk space and number of files in install and temp dirs
# and display it if there actually any installed files
{
for each_tree in "$inst_tree" "$tmp_tree"
do
if [ -d "$each_tree" ]
then
num_files="`find \"$each_tree/.\" -type f | wc -l`"
if [ $num_files -gt 0 ]
then
size_files="`du -s \"$each_tree/.\" | awk '{ printf(\"%d\",$1/1024); }'`"
message "$each_tree tree contains $num_files files totalling $size_files MB" "n"
fi
fi
done
}
clean_up()
# Remove the stuff we don't want to keep once script finishes
{
# Make sure we don't trash system directories!
if [ "$tmp_tree" != "" -a "$tmp_tree" != "/" -a "$tmp_tree" != "/tmp" ]
then
if [ $delete_tmp -eq 1 ]
then
if [ -d "$tmp_tree" ]
then
if [ $dry_run -eq 1 ]
then
echo "Would delete temporary dir $tmp_tree"
echo
else
cd /
rm -rf "$tmp_tree"
if [ -d "$tmp_tree" ]
then
warning "Failed to delete temporary directory $tmp_tree"
else
message "Deleted temporary directory $tmp_tree"
fi
fi
fi
else
rm_dir_list="etc lib lib64 usr sbin usr var"
if [ $dry_run -eq 1 ]
then
echo "Would delete these directories from inside of $tmp_tree:"
echo "$rm_dir_list"
else
# We delete specific directories so that RPM downloads/builds
# remain and can be re-used if the script is run again
for each_dir in $rm_dir_list
do
rm -rf "$tmp_tree/$each_dir"
done
fi
fi
show_space_used
fi
}
is_installed()
# See if $1 package is installed (returns non-null string if it is)
{
rpm -q "$1" | egrep "($rpmarch|$arch|noarch)" | grep "^$1"
}
uninstall_rpms()
# Uninstall $* RPMs if they are installed
{
uninstall_list=""
for each_pack in $*
do
if [ "`is_installed $each_pack`" != "" ]
then
uninstall_list="$uninstall_list $each_pack"
fi
done
if [ "$uninstall_list" != "" ]
then
if [ $dry_run -eq 1 ]
then
echo "Would uninstall $uninstall_list using \"yum remove\""
echo
else
message "Uninstalling $uninstall_list"
yum $yum_options remove $uninstall_list
fi
fi
}
uninstall_google_chrome()
# Uninstall the Google Chrome and chrome-deps-* RPMs if they are installed
{
# Remove bug fix soft-link if necessary
if [ "$rpm_type" != "stable" -a -h $chrome_desktop ]
then
rm -f $chrome_desktop
fi
# Note we use the old name in addition, in case it's still installed
uninstall_rpms $rpm_name $deps_name
# Do a final cleanup if /opt/google/chrome* persists
if [ "$inst_tree" != "" -a "$inst_tree" != "/" -a "$inst_tree" != "/tmp" ]
then
if [ -d "$inst_tree" -a $dry_run -eq 0 ]
then
warning "$inst_tree install tree still present - deleting it" "n"
cd /
rm -rf "$inst_tree"
if [ -d "$inst_tree" ]
then
warning "Failed to delete $inst_tree install tree" "n"
fi
fi
fi
}
error()
# $1 = Error message
# Exit script after displaying error message
{
if [ $dry_run -eq 1 ]
then
echo "Would display this error message to stderr:"
echo "ERROR: $1 - aborted"
else
echo >&2
echo "ERROR: $1 - aborted" >&2
echo >&2
fi
# A failure means we have to uninstall Google Chrome
# if it got on the system and we were installing, but only
# if we got past the check that it was running
if [ $do_install -eq 1 -a $past_run_check -eq 1 ]
then
uninstall_google_chrome
fi
clean_up
exit 1
}
interrupt()
# Interrupt received (usually CTRL-C)
{
error "Interrupt (usually CTRL-C) received"
}
set_tmp_tree()
# Set tmp_tree variable to $1/chrome_install
{
if [ "$1" = "" -o "$1" = "/" -o "`echo \"x$1\" | grep ^x-`" != "" ]
then
error "Invalid temporary directory parent specified ($1)"
fi
if [ ! -d "$1" ]
then
warning "Temporary directory parent $1 doesn't exist - will be created"
fi
tmp_tree="$1/chrome_install"
customsrc="$tmp_tree/missing_functions.c"
}
check_binary_not_running()
# See if the Google Chrome binary is running and abort if it is
{
if [ $dry_run -eq 1 ]
then
echo "Would check to see if $chrome_name is running and abort if it is."
echo
else
if [ "`ps -ef | grep \"$inst_tree/chrome\" | grep -v grep`" != "" ]
then
error "$chrome_name is running - exit it then re-run this script"
fi
fi
past_run_check=1
}
yesno()
# $1 = Message prompt
# $2 = Minimal force level required (1 if not stated)
# Returns ans=0 for no, ans=1 for yes
{
ans=1
if [ $dry_run -eq 1 ]
then
echo "Would be asked here if you wanted to"
echo "$1 (y/n - y is assumed)"
else
if [ "$2" = "" ]
then
minforce=1
else
minforce=$2
fi
if [ $force -lt $minforce ]
then
ans=2
fi
fi
while [ $ans -eq 2 ]
do
echo -n "Do you want to $1 (y/n) ?" ; read reply
case "$reply" in
Y*|y*) ans=1 ;;
N*|n*) ans=0 ;;
*) echo "Please answer y or n" ;;
esac
done
}
set_rpm_type()
# Set RPM type to $1
# $1 = stable, beta or unstable
{
if [ $do_install -eq 1 -a "$1" != "$old_rpm_type" ]
then
case "$1" in
stable|beta|unstable)
if [ $dry_run -eq 1 ]
then
echo "Would prompt to confirm switch to $1 channel"
echo "(assuming y is input)"
echo
else
warning "You have requested to switch to the $1 channel"
if [ $quiet -eq 0 ]
then
echo "This script will uninstall all previously installed $chrome_name"
echo "packages that originated from non-$1 channels."
echo
fi
yesno "install the $1 release"
if [ $ans -eq 0 ]
then
error "Did not switch to the $1 channel"
fi
fi ;;
*) error "Invalid $chrome_name channel ($1)" ;;
esac
check_binary_not_running
uninstall_rpms \
`echo google-chrome-stable google-chrome-beta google-chrome-unstable \
chrome-deps-stable chrome-deps-beta chrome-deps-unstable | \
sed -e "s/google-chrome-$1//g" -e "s/chrome-deps-$1//g"`
fi
case "$1" in
stable|beta|unstable)
rpm_type="$1"
case "$1" in
unstable) csv_type="dev" ;;
*) csv_type="$1" ;;
esac
rpm_name="google-chrome-$1"
#chrome_csv="http://omahaproxy.appspot.com/all?os=linux&channel=$csv_type"
chrome_rpm="google-chrome-stable-37.0.2062.120-1.x86_64.rpm" ;;
*) error "Invalid $chrome_name type ($1)" ;;
esac
case "$1" in
beta|unstable) swtype="chrome-$1" ;;
*) swtype="chrome" ;;
esac
inst_tree="/opt/google/$swtype"
libdir="$inst_tree/lib"
missinglib="libgnome-keyring.so.0"
customlib="$libdir/$missinglib"
customlink="$libdir/link-to-${missinglib}"
chrome_wrapper="$inst_tree/google-$swtype"
modify_wrapper="$inst_tree/modify_wrapper"
this_desktop="$app_tree/google-$swtype.desktop"
deps_name="chrome-deps-$rpm_type"
deps_latest="`is_installed $deps_name | grep $deps_version`"
}
init_vars()
# Initialise variables
# $1 = Original $0 (i.e. script name)
{
# Set option variables to temporary values so that errors prior to the
# actual option parsing behave sensibly
dry_run=0 ; do_install=0 ; delete_tmp=0
past_run_check=0 ; force=0
# Avoid picking up the custom libs for any binaries
# run by this script
unset LD_LIBRARY_PATH
if [ "$TMPDIR" = "" ]
then
set_tmp_tree "/tmp"
else
set_tmp_tree "$TMPDIR"
fi
arch="`uname -m`"
case "$arch" in
x86_64) rellib="lib64" ; rpmarch="$arch"
rpmdep="()(64bit)" ;;
i686) rellib="lib" ; rpmarch="i386"
rpmdep="" ;;
*) error "Unsupported architecture ($arch)" ;;
esac
relusrlib="usr/$rellib"
chrome_name="Google Chrome"
# The next definition (chrome_defaults) should probably be different for
# stable vs. others, but Google haven't changed it because it's not
# shipped with the RPM, but actually created during installation.
chrome_defaults="/etc/default/google-chrome"
chrome_repo="/etc/yum.repos.d/google-chrome.repo"
app_tree="/usr/share/applications"
chrome_desktop="$app_tree/google-chrome.desktop"
deps_version="3.11"
download_lib="libstdc++.so.6"
download_lib_xz="$download_lib.xz"
# Find the most stable installed Google Chrome and use that
# as the default for the rest of the script (override with -b, -s or -U)
old_rpm_type=""
for each_old_rpm_type in stable beta unstable
do
if [ "$old_rpm_type" = "" ]
then
if [ "`is_installed google-chrome-$each_old_rpm_type`" != "" ]
then
old_rpm_type="$each_old_rpm_type"
fi
fi
done
# If nothing installed at all, default to stable
if [ "$old_rpm_type" = "" ]
then
old_rpm_type="stable"
fi
set_rpm_type "$old_rpm_type"
wrapper_mod_version="2.10"
install_message="already installed"
trap "interrupt" 1 2 3
suffix="$arch.rpm"
centver="7.1.1503"
oldcentver="7.0.1406"
# Note that when 7.1.1503 provides a libstdc++ update, we'll have 2 fallbacks
# (penultimate 7.1.1503 and the last 7.0.1406 update)
# CentOS $centver initial release directory
baseurl="http://mirror.centos.org/centos-7/$centver/os/x86_64/Packages"
# CentOS $oldcentver updates directory
baseurlfallback="http://vault.centos.org/$oldcentver/updates/x86_64/Packages"
wget="/usr/bin/wget"
wget_options="--no-check-certificate"
yum_options="-y"
rpm_options="-U --force --nodeps"
chcon_options="-u system_u"
rpmbuild_options="-bb"
# Update checker URL
checksite="http://chrome.richardlloyd.org.uk/"
checkfile="version.dat"
checkurl="$checksite$checkfile"
scriptname="install_chrome.sh"
upgradeurl="$checksite$scriptname"
script="$1"
case "$script" in
./*) script="`pwd`/`basename $script`" ;;
/*) script="$script" ;;
*) script="`pwd`/$script" ;;
esac
}
download_file()
# $1 = Full URL to download
# $2 = Optional basename to save to (if omitted, then = basename $1)
# Also allow download to silently fail without exit if $2 is set
# $3 = Optional cksum value to compare download against
# $4 = Optional 0 if failures are warnings, = 1 if errors
{
if [ "$2" = "" ]
then
dlbase="`basename \"$1\"`"
else
dlbase="$2"
fi
if [ $dry_run -eq 1 ]
then
echo "Would download this URL to $tmp_tree/$dlbase :"
echo $1 ; echo
return
fi
old_dlbase="$dlbase.old"
if [ -f "$dlbase" ]
then
if [ "$3" != "" ]
then
# If file already exists with right cksum, do nothing
if [ "`cksum \"$dlbase\"`" = "$3" ]
then
return
fi
fi
rm -f "$old_dlbase"
mv -f "$dlbase" "$old_dlbase"
fi
message "Downloading $dlbase (please wait)"
$wget $wget_options -O "$dlbase" "$1"
if [ -s "$dlbase" -a "$3" != "" ]
then
if [ "`cksum \"$dlbase\"`" != "$3" ]
then
rm -f "$dlbase"
warning "Deleted downloaded $dlbase - checksum or size incorrect"
fi
fi
if [ ! -s "$dlbase" ]
then
if [ -f "$old_dlbase" ]
then
mv -f "$old_dlbase" "$dlbase"
fi
if [ "$2" = "" -o "$3" != "" ]
then
if [ "$4" = "0" ]
then
warning "Failed to download $dlbase correctly"
else
error "Failed to download $dlbase correctly"
fi
fi
fi
}
change_se_context()
# $1 = File or directory name
# Change SELinux context type for $1 to lib_t (or other
# types depending on its name)
{
if [ $selinux_enabled -eq 0 ]
then
# chcon commands fail if SELinux is disabled
return
fi
if [ -s "$1" -o -d "$1" ]
then
case "$1" in
$chrome_wrapper) con_type="execmem_exec_t" ;;
$customlib) con_type="textrel_shlib_t" ;;
*) con_type="lib_t" ;;
esac
if [ $dry_run -eq 1 ]
then
echo "Would change SELinux context type of $1 to $con_type"
echo
else
chcon $chcon_options -t $con_type "$1"
fi
else
if [ $dry_run -eq 0 ]
then
error "Couldn't change SELinux context type of $1 - not found"
fi
fi
}
install_custom_lib()
# Compile and install missing function lib as $libdir/libgnome-keyring.so.0
{
if [ $dry_run -eq 1 ]
then
echo "Would compile/install $customlib"
echo
return
fi
cat <<@EOF >"$customsrc"
/* missing_functions.c 3.00 (C) Richard K. Lloyd 2015 <rklloyd@gmail.com>
Provides a gnome_keyring_attribute_list_new() function (was
a macro in CentOS 6 causing a missing symbol error when Google Chrome
was started up) that's present in later libgnome-keyring libraries.
See: https://mail.gnome.org/archives/commits-list/2012-January/msg08007.html
*/
/* Providing the "missing" gnome_keyring_attribute_list_new function
-----------------------------------------------------------------
To avoid having to install various *-devel packages, the required
definitions in CentOS 6.6 headers have been simplified to avoid the
need for any include files. I have also added the string "Custom" to the end
of any definitions that may clash with the original CentOS 6 libraries.
*/
/* Simplifying glib/gtypes.h, glib/garray.h and gnome-keyring.h,
we get this: */
struct GnomeKeyringAttributeListCustom
{
char *data;
int len;
};
/* Simplifying glib/gtypes.h and glib/garray.h, we get this: */
struct GnomeKeyringAttributeListCustom *
g_array_new (int zero_terminated, int clear_, unsigned int element_size);
/* This is straight from gnome-keyring.h: */
typedef enum {
GNOME_KEYRING_ATTRIBUTE_TYPE_STRING,
GNOME_KEYRING_ATTRIBUTE_TYPE_UINT32
} GnomeKeyringAttributeTypeCustom;
/* Simplifying glib/gtypes.h and gnome-keyring.h, we get this: */
typedef struct {
char *name;
GnomeKeyringAttributeTypeCustom type;
union {
char *string;
unsigned int integer;
} value;
} GnomeKeyringAttributeCustom;
/* The "missing" function from CentOS 6's gnome-keyring library */
struct GnomeKeyringAttributeListCustom *
gnome_keyring_attribute_list_new (void)
{
return g_array_new (0, 0, sizeof (GnomeKeyringAttributeCustom));
}
@EOF
if [ -s "$customsrc" ]
then
rm -f "$customlink" "$customlib"
# Compile 1: Create the library as the link name.
# You could probably copy any old system library
# in as $customlink to be honest 
gcc -O -fpic -shared -s -o "$customlink" "$customsrc"
if [ ! -s "$customlink" ]
then
error "Failed to compile $customlink library"
fi
# Compile 2: Create the library as the system name and link
# against the link name
gcc -O -fpic -shared -s -o "$customlib" "$customsrc" "$customlink"
if [ ! -s "$customlib" ]
then
error "Failed to compile $customlib library"
fi
# Now remove the link name library/source file and replace the library
# with a soft-link to the system library. Now we have $customlib with
# the single function that will also load in the system library. It
# Would have been easier if there was a built libgnome-keyring.a <sigh>
rm -f "$customlink" "$customsrc"
ln -sf "/$relusrlib/$missinglib" "$customlink"
if [ -h "$customlink" ]
then
chmod a+rx "$customlib"
change_se_context "$customlib"
message "Compiled/installed $customlib"
else
error "Failed to create $customlink soft-link"
fi
else
error "Unable to create $customsrc source file"
fi
}
install_library()
# $1 = Core of basename of RPM filename
# $2 = cksum of RPM
# $3 = Size of RPM (in bytes)
# $4 = After unpacking, relative path to library soft-link
# $5 = Download URL dir
# $6 = 0 means download failures are warnings, = 1 means errors
{
# If we've already installed libstdc++, do nothing
if [ $lib_installed -eq 1 ]
then
return
fi
lib_name="`basename $4`"
fname="$libdir/$lib_name"
rpmfile="$1.$suffix"
rpmcksum="$2 $3 $rpmfile"
if [ -s $rpmfile ]
then
if [ "`cksum $rpmfile`" != "$rpmcksum" ]
then
rm -f $rpmfile
warning "Deleted pre-existing $rpmfile - checksum or size incorrect"
fi
fi
if [ ! -s $rpmfile ]
then
download_file "$5/$rpmfile" "$rpmfile" "$rpmcksum" "$6"
if [ ! -s $rpmfile -a $6 -eq 0 ]
then
return
fi
fi
message "Installing $fname" "n"
if [ $dry_run -eq 1 ]
then
echo "Would unpack $rpmfile using rpm2cpio/cpio and"
echo "then copy $4 to $fname" ; echo
return
fi
rpm2cpio "$rpmfile" | cpio -id 2>/dev/null
if [ $6 -eq 0 ]
then
errfunc="warning" ; retfunc="return"
else
errfunc="error" ; retfunc=""
fi
rel_link="`dirname \"$4\"`/$lib_name"
if [ ! -h "$rel_link" ]
then
$errfunc "Failed to find $rel_link soft-link (couldn't install $fname)"
$retfunc
fi
rel_file="`dirname \"$4\"`/`readlink \"$rel_link\"`"
if [ ! -s "$rel_file" ]
then
$errfunc "Failed to find $rel_file file (couldn't install $fname)"
$retfunc
fi
rm -f "$fname"
cp -fp "$rel_file" "$fname"
if [ -s "$fname" ]
then
change_se_context "$fname"
lib_installed=1
else
$errfunc "Failed to install $fname"
$retfunc
fi
}
check_version()
# Make sure that we are running the latest version
# $* = Params passed to script
{
message "Checking for an update to $scriptname" "n"
download_file "$checkurl"
if [ $dry_run -eq 1 ]
then
echo "Would check if this running script (version $version) is out of date."
echo "If it's been superseded, the new version would be downloaded and you'd be asked"
echo "if you want to upgrade to it and run the new version."
echo
return
fi
newversion="`cat \"$checkfile\"`"
newversion="`echo $newversion`"
rm -f "$checkfile"
if [ "$newversion" = "$version" ]
then
message "$scriptname is already the latest version ($version) - continuing" "n"
else
message "New version ($newversion) of $scriptname detected - downloading it now"
download_file "$upgradeurl"
if [ "$scriptname" -ef "$script" ]
then
let a=1
else
mv -f "$scriptname" "$script"
fi
chmod u+x "$script"
message "Download of $scriptname $newversion successful"
yesno "run $scriptname $newversion now"
if [ $ans -eq 1 ]
then
message "OK, executing $script $*"
exec "$script" $*
error "Failed to run $script $*"
else
if [ $quiet -lt 2 ]
then
echo
echo "$scriptname $newversion is available as $script"
echo "Please inspect the new code and then run the new script."
echo
fi
clean_up
exit 1
fi
fi
}
find_latest_chrome_version()
# Look on OmahaProxy CSV site or in yum repo for latest version number of linux/$csv_type/current
{
message "Determining latest $chrome_name version number (please wait)" "n"
chrome_latest=""
# Do we have a Google Chrome RPM already installed and also
# an enabled yum repo for it too?
if [ "$chrome_installed" != "" -a "`yum repolist google-chrome enabled | grep ^google-chrome`" != "" ]
then
if [ $dry_run -eq 1 ]
then
echo "Would use yum check-update to determine if there was a later $chrome_name available."
echo
return
fi
# We have an enabled repo, do use check-update option to look for an update
chrome_latest="`yum check-update google-chrome-$rpm_type | grep ^google-chrome-$rpm_type |
awk '{ print $2; }' | cut -d- -f1`"
fi
if [ "$chrome_latest" = "" ]
then
# No repo update, so now use OmahaProxy's current CSV to find latest version
csv_name="chrome_versions.csv"
download_file "$chrome_csv" "$csv_name"
if [ $dry_run -eq 1 ]
then
echo "Would use OmahaProxy current CSV to determine latest $chrome_name version number"
echo
return
fi
if [ -s "$csv_name" ]
then
chrome_latest="`grep ^linux,$csv_type, \"$csv_name\" | head -1 | cut -d, -f3`"
fi
rm -f "$csv_name"
fi
if [ "$chrome_latest" = "" ]
then
warning "Unable to determine latest $chrome_name version number" "n"
else
message "Latest $rpm_name version number is $chrome_latest" "n"
chrome_name="$chrome_name $chrome_latest"
fi
}
get_installed_version()
# Find out what version of Google Chrome is installed
{
if [ $dry_run -eq 1 ]
then
echo "Would use \"$chrome_wrapper --version\" or"
echo "\"rpm -q $rpm_name\" to determine installed Google Chrome version"
echo
return
fi
# Look for the installed RPM first and get version from that
chrome_installed="`is_installed $rpm_name | cut -d- -f4`"
# If RPM not installed, see if we can use the shell wrapper for the version
if [ "$chrome_installed" = "" -a -x "$chrome_wrapper" ]
then
# This may fail of course if Google Chrome 28+ installed without custom libstdc++
chrome_installed="`\"$chrome_wrapper\" --version 2>/dev/null | awk '{ print $3; }'`"
fi
}
get_downloaded_version()
# Find out what version of Google Chrome RPM was downloaded
{
if [ $dry_run -eq 1 ]
then
chrome_downloaded=""
echo "Would use \"rpm -qp\" on downloaded Google Chrome RPM to find its version"
echo
return
fi
if [ -s $chrome_rpm ]
then
chrome_downloaded="`rpm -qp \"$chrome_rpm\" | cut -d- -f4`"
if [ "$chrome_downloaded" = "" ]
then
error "Can't find version number of $chrome_rpm"
fi
else
chrome_downloaded=""
fi
}
download_chrome_rpm()
# Download latest RPM because we don't have it downloaded and don't have
# the latest release installed either
{
#download_file "https://dl.google.com/linux/direct/$chrome_rpm"
get_downloaded_version
if [ $dry_run -eq 1 ]
then
return
fi
if [ "$chrome_latest" = "" ]
then
chrome_latest="$chrome_downloaded"
fi
if [ "$chrome_downloaded" != "$chrome_latest" ]
then
# Downloaded version is different from what OmahaProxy claims is
# the latest version, so we need to compare the four dot-separated
# fields of the version numbers to judge which is the higher.
dotfield=1
while [ $dotfield -le 4 ]
do
dlfield="`echo $chrome_downloaded | cut -d. -f$dotfield`"
ltfield="`echo $chrome_latest | cut -d. -f$dotfield`"
if [ "$dlfield" != "" -a "$ltfield" != "" ]
then
if [ $dlfield -lt $ltfield ]
then
error "Downloaded Google Chrome RPM version ($chrome_downloaded) is older than the latest one ($chrome_latest)"
else
# If the downloaded version field is definitely higher, then
# it's the new latest version and we exit the loop early
if [ $dlfield -gt $ltfield ]
then
chrome_latest="$chrome_downloaded"
dotfield=4
fi
fi
fi
let dotfield=$dotfield+1
done
fi
message "$chrome_name downloaded successfully" "n"
}
install_chrome_rpm()
# We force install the RPM because RHEL/CentOS 6's packages
# are below the minimum requirements now
{
if [ $dry_run -eq 1 ]
then
echo "Would force-install $chrome_rpm RPM and"
echo "then check the installed version number is the one it should be"
return
fi
message "Installing $chrome_name RPM (please wait)"
check_binary_not_running
rm -f "$inst_tree/chrome"
# Remove soft-link for bug fix if it exists
if [ -h $chrome_desktop ]
then
rm -f $chrome_desktop
fi
# Fix beta/unstable RPM packaging bug by creating a soft-link to the
# .desktop file about to be unpacked, assuming that the stable package
# hasn't put one there already
if [ "$rpm_type" != "stable" -a ! -s $chrome_desktop ]
then
ln -sf $this_desktop $chrome_desktop
fi
rpm $rpm_options "$chrome_rpm"
if [ ! -x "$inst_tree/chrome" ]
then
error "Failed to install $chrome_name"
else
get_installed_version
if [ "$chrome_installed" = "$chrome_latest" ]
then
message "$chrome_name was installed successfully"
install_message="installed successfully"
else
error "Newly-installed Google Chrome version ($chrome_installed) not the latest one ($chrome_latest)"
fi
fi
}
update_google_chrome()
# Download and install the latest Google Chrome RPM
# if it's either out of date or not installed yet
{
get_installed_version
find_latest_chrome_version
get_downloaded_version
if [ $dry_run -eq 1 ]
then
echo "Would check if installed Google Chrome is the latest version."
echo "If it isn't, the latest version would be downloaded and installed."
echo
return
fi
if [ "$chrome_installed" = "$chrome_latest" -a "$chrome_latest" != "" ]
then
message "$chrome_name is already installed - skipping installation"
else
if [ "$chrome_downloaded" != "$chrome_latest" -o "$chrome_latest" = "" ]
then
download_chrome_rpm
fi
install_chrome_rpm
fi
}
init_setup()
# Get everything setup and do a few basic checks
{
if [ $quiet -lt 2 ]
then
echo "$chrome_name $inst_str $version on the $arch platform"
echo "(C) Richard K. Lloyd `date +%Y` <rklloyd@gmail.com>"
show_space_used
echo
fi
if [ $dry_run -eq 1 ]
then
echo "Running in dry-run mode (-n) - none of the actions below will be performed."
if [ $quiet -ne 0 ]
then
echo "Please note that combining dry-run and quiet modes isn't a good idea,"
echo "but I'll continue anyway just to keep you happy."
fi
echo
fi
# Must run this script as root
if [ `id -u` -ne 0 ]
then
error "You must run $scriptname as the superuser (usually root)"
fi
if [ "$tmp_tree" = "" -o "$tmp_tree" = "/tmp" -o "$tmp_tree" = "/" ]
then
error "Temporary directory location ($tmp_tree) incorrect"
fi
if [ $do_install -eq 0 ]
then
return
fi
if [ $dry_run -eq 1 ]
then
if [ ! -d "$tmp_tree" ]
then
echo "Would create temporary $tmp_tree directory"
fi
echo "Would change working directory to $tmp_tree"
echo
else
if [ ! -d "$tmp_tree" ]
then
message "Creating temporary directory $tmp_tree" "n"
mkdir -p "$tmp_tree"
if [ ! -d "$tmp_tree" ]
then
error "Couldn't create $tmp_tree directory"
fi
fi
message "Changing working directory to $tmp_tree" "n"
cd /
cd "$tmp_tree"
if [ "`pwd`" != "$tmp_tree" ]
then
error "Couldn't change working directory to $tmp_tree"
fi
fi
}
check_derivative()
# Check for RHEL/CentOS 6 or 7 family
{
case "`sed -e 's/ /_/g' </etc/redhat-release 2>/dev/null`" in
*_6.*) centos=6 ;;
*_7*) centos=7 ;;
*) echo
echo "This OS doesn't look like it's in the RHEL/CentOS 6 or 7 family."
echo "Very bad things could happen if you continue!"
echo
yesno "you want to continue" 2
if [ $ans -eq 1 ]
then
message "OK, but you've been warned (assuming RHEL/CentOS 7 family)"
centos=7
else
error "Probably a wise move"
fi ;;
esac
if [ $centos -eq 7 ]
then
# RHEL/CentOS 7 doesn't need chrome-deps-* RPM or build tools
deps_name="" ; deps_latest="latest"
fedlibs="was" ; scriptdeps=""
else
fedlibs="and extra libraries were"
scriptdeps=" and its dependencies added by this script"
fi
}
yum_install()
# Download and Install specified packages if they aren't already installed
# $1 = "prompt" Prompt if any of $2.. aren't already installed
# $2.. = List of packages to install
{
# Nothing to install yet
install_list=""
if [ "$1" = "prompt" ]
then
prompt=1 ; promptstr="ask for"
else
prompt=0 ; promptstr="proceed with" ; ans=1
fi
shift
for each_dep in $*
do
if [ "`is_installed $each_dep`" = "" ]
then
install_list="$install_list $each_dep"
fi
done
if [ "$install_list" != "" ]
then
if [ $dry_run -eq 1 ]
then
echo "Would $promptstr the installation of these packages and their dependencies:"
echo "$install_list"
echo
return
fi
echo "The following packages and their dependencies need downloading/installing:"
echo "$install_list"
if [ $prompt -eq 1 ]
then
echo
yesno "download/install these packages and dependencies"
fi
if [ $ans -eq 1 ]
then
message "Downloading/installing $install_list (please wait)"
yum $yum_options install $install_list
else
error "Those packages are required by this script"
fi
fi
}
request_reboot()
# Request that the user reboots the machine after any upgrade
# $1 = Kernel string number
{
echo "You are STRONGLY RECOMMENDED to reboot this machine to run the new $1 kernel."
echo "If you don't, it's likely $chrome_name will not run correctly."
echo "Please close all applications now (except this script!) if you want to reboot."
warning "These users are logged into this machine: `users | tr ' ' '\n' | sort -u`"
yesno "reboot this machine immediately" 3
if [ $ans -eq 1 ]
then
message "Rebooting machine now"
/sbin/shutdown -r now
exit 0
fi
warning "You are advised not t