Hey there!
Up for grabs is a flawlessly working NBA Maximum Hangtime PCB along with the Players 3 and 4 harnesses. Those harnesses has been modified: I've soldered diodes for all wires so I don't get any feedbacks when connected to multi-boards PCB (as stated at that location: https://forums.arcade-museum.com/arc.../t-264107.html).
The harnesses are working perfectly with and without the multi-board switcher. If you have a specific configuration, you might need to remove those diodes and re-attach all the wires, which is no big deal. But again, I've been using the harnesses while having NBA Maximum Hangtime inside a cabinet as the main (and only) PCB and it was working flawlessly.
Living in Canada, but shipping from either Canada or USA, depending of where you live.
So, for both US and Canada, I'm asking $150 USD, free shipping for both countries (quite rare for Canadians, eh!).
Thank you!
Attached Images
IMG_2609.jpeg (486.1 KB)
IMG_4289.jpeg (738.7 KB)
IMG_9047.jpeg (577.1 KB)
IMG_2599.jpeg (648.3 KB)
IMG_0808.jpeg (531.2 KB)