Thanks for the post, his post sure sounded in line with the situation I'm in. Someone on the OSMC forum had also suggest grounding both ends of the shielding.
I'm following a suggestion from there, and am going to try shielded CAT6 cable first. I'll snip the jacks off the end, split out the twisted pair, solder to my connectors, and see if I can attach the shielding to ground. I suspect the cable will be a bit ugly, since the 10 pin connectors I'm using (not using all lines) crimp onto a ribbon cable.
Statistics: Posted by satacoy — Wed Feb 25, 2015 9:28 pm