Are you having problems from a squeaking garage door? No more worries, after reading through this guideline you will be able to know what needs to be done to halt these seemingly constant squeaking and grinding sounds once and for all. Garage doors comprises a complex system of cables, springs and pulleys which have been fastened together by means of bolts and screws, and overtime they may cause a variety of problems, for instance fierce and loud noises that affect your family or even neighbors especially at night when they are supposed to be asleep. These problems mostly arise as a result of friction exerted when opening or closing your garage door. Some home owners may thus prefer to replace their garage door with a quieter model but this is not a cost friendly solution. So what’s the solution then? Do the following;
i) Lubricate your garage door.
Moving garage door components such as springs and rollers should be lubricated regularly. Spray or apply the lubricant liberally on every moving part including hinges between the garage door panels, along the inside of the tracks, the chain to ensure a smooth slide around the gears and around the metal rollers. This helps to reduce additional vibrations which develop when components work hard in order to move.
ii) Check for loose connections.
Any loose bolt or screw on your door, opener and track should be tightened. Unloose garage door parts is a common problem that may cause the whole unit to rattle while the door is being opened or closed.
iii) Use nylon garage door rollers.
Metal rollers are a bit noisy when moving along the metal tracks compared to nylon rollers. Another advantage of using nylon rollers is that they don’t require much lubrication compared to their counterparts thus reducing the amount of time you might spend on garage door maintenance.
iv) Add buffers.
Add some pieces of rubber to act as buffers to the opener and garage door supports. Use a socket wrench to hold the door to the opening track, and then slowly remove the bolts that hold the door in place and slide in a thin piece of rubber (about 1/4 inch wide) between the bolt assembly and garage door. Tighten up the bolts. Now brace the door opener on wooden blocks and a ladder, and remove the bolts that hold it to the metal support frame. From the same rubber cut two equal rectangular pieces and make two holes about 1.5 inches apart, then bolt one of the end to the frame and the other end to the opener such that the opener is now suspended by the rubber from the frame. Rubber pieces help in absorbing any vibrations before they get to the support frame, thus subduing vibration noises.
v) Replace worn out parts.
Worn and faulty garage door components such as springs, hinges and bearings in the rollers or the pulley cause a loud grinding noise. Replacing such components may be dangerous and several precautions need to be taken into consideration to avoid serious body harm to you, other members of the household as well as visitors.
However, before attempting a DIY fix of your garage door, it’s noteworthy that some problems are a bit complex and dangerous to perform and are best left to the garage door professionals.
Need help solving noisy garage door problems or other garage door services to be brought right to your doorstep? Contact Cincinnati garage door experts now. Some of the services you might be interested in include installation, inspection, repair and maintenance of your garage door components including openers, panels, springs and cables.
Find us on Bizsheet & Chamber of Commerce
