…or perhaps a computer that is not so distant
This is a Plus Edition article written by and copyright by Dick Eastman.
Remote control software for desktop and laptop computers has been available for years. All systems administrators of large data centers are familiar with these programs, as are many “work from home” individuals who need to control computers at the office on nights and weekends. However, the same technology is available to everyone; you do not need to be a systems professional in order to access the computer on your desk at the office or the one at home when you are traveling. Best of all, many of these remote control products are available free of charge.
Remote control software has a very simple goal: add a second monitor, keyboard and mouse to a computer. The difference is that these secondary items are located some distance away, perhaps miles or even thousands of miles away. I was recently in Singapore and was able to access my computer in the US in essentially the same way that I do when I am at home. Everything that is displayed on my computer’s monitor at home was displayed on my iPad in Singapore. Everything that I normally would type on the home computer’s keyboard worked well when I typed on the (optional) iPad keyboard in Singapore. The mouse also worked as normal, although I used my finger as a substitute mouse on the iPad’s touch-sensitive screen. Still, it produced the same results as using the mouse when at home.
I had full access to my new and saved email messages, to all the files on my home computer’s hard drive, and more. The only thing missing was that I could not insert a CD into the slot in the home computer.
The secondary monitor, keyboard and mouse are connected to a standard Windows, Macintosh or Linux system or, in some cases, are part of an Android or iOS (iPhone, iPad, or iPod Touch) handheld device. I normally use the iPad but also can use a laptop, if needed. The remote system provides the necessary functionality to connect the video/keyboard/mouse simultaneously to the local and the distant computers.
Remote control software can be very useful. You can use remote control software to access a distant computer in essentially the same way as if you were sitting in front of that system. Another common use is to provide instruction or assistance to a distant student. While the two of you may be many miles apart and are seated in front of different computers, both the student and the teacher see the same things on their screens simultaneously. I find remote access very useful for helping a non-computer-literate relative learn how to use applications or to troubleshoot problems.
Either person can type on the keyboard or use the mouse in exactly the same manner as a single user of one computer. I sometimes do that while talking with the second person by telephone or by a VoIP (Voice over Internet Protocol) voice connection over the Internet.
Remote control software is perhaps the best tool that a computer instructor or a tech support person can use.
With remote control software, you can also connect to your home or office system to check your e-mail. You can use a database, word processor, or other program that is installed on your home system but not on your laptop. You can connect to the office to run business applications. Want to check your genealogy program when traveling? You can do so from many miles away, even if you are using a different operating system.
More than once, I have been in a hotel room with a laptop computer and realized that the very important file that I need is on the desktop computer at home. One time I was about to deliver a presentation at a genealogy convention. I felt that 15 minutes of set-up time would be sufficient. After all, I simply needed to plug in the laptop, connect it to the overhead projector, and load PowerPoint. I thought I could set up in less than five minutes. With only minutes to spare, I went to the podium, performed the first few steps, and loaded PowerPoint. I then panicked when I realized that I had neglected to copy my presentation’s PowerPoint slides to the laptop. Here I was 1,000 miles from home, with about five minutes to the scheduled start of my presentation, and I didn’t have the slides!
Luckily, the presentation room had wi-fi Internet access. I connected to the Internet, then to my desktop computer at home – 1,000 miles away – retrieved the file, and started my presentation on time. The audience never knew about my near-panic attack. The only clue was the beads of perspiration that remained on my forehead.
Remote control software is often used to manage unattended servers. For example, one company operates a worldwide control center in an office building not far from my home. They use remote control software to manage all their servers. An employee can sit at his desk and remotely perform all required functions, except for pushing power off or power on or placing a disk into the CD-ROM drive. Some of the servers being managed are in the next room while others are in Hong Kong, Malaysia, New Delhi, and the Bahamas. Location makes no difference; all servers are handled in the same unattended manner.
My web server is on a Linux server in Provo, Utah. I sit at home and use a Macintosh to connect to it, using it in the same manner as if I was in Provo. I can do the same from a hotel room in Singapore or Scotland or even from a commuter train by using a laptop computer with a wireless Internet connection.
The same technology is also useful for remote assistance and instruction. More than once I have remotely trained a friend or relative on how to use a particular computer program or web site. Once the remote user gives permission, I can connect to his or her computer and “take over” the mouse and keyboard as we both watch the same display on our two computer screens. I can troubleshoot problems and teach the other person how to use some functionality. This is especially useful when the remote user is not computer-literate. Do you need to train someone on how to use a program or a web site? It makes no difference if the other person is across town or in Australia: the process is easy and very effective.
The remainder of this article is for Plus Edition subscribers only and will remain in the Plus Edition subscribers’ web site for several weeks. SUBSCRIBE NOW to read this article.
There are three different methods of viewing the full Plus Edition article:
1. If you have a Plus Edition user ID and password, you can read the full article right now at no additional charge in this web site’s Plus Edition at http://eogn.com/wp/?p=41593. This article will remain online for several weeks.
If you do not remember your Plus Edition user ID or password, you can retrieve them at http://www.eogn.com/wp/ and click on “Forgot password?”
2. If you do not have a Plus Edition subscription but would like to subscribe, you will be able to immediately read this article online. What sort of articles can you read in the Plus Edition? Click here to find out. For more information or to subscribe, goto https://blog.eogn.com/subscribe-to-the-plus-edition.
3. Non-subscribers may purchase this one article without subscribing for $2.00 US. You may purchase the article by clicking here. Payment can be made with VISA, MasterCard, American Express, Discover Card, or with PayPal’s safe and secure payment system. You can then either read the article on-screen or else download it to your computer and save it.
Filed under: Plus Edition Article 
