FWIW I'm not having a 'problem' per se with flashing the CHIP. It's the internal operation of the fastboot that seems to be having a problem. Comm with chip seems to go ok (as far as I can tell.) But the info you requested is below:
lsusb:
vagrant@vagrant-ubuntu-trusty-32:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 1f3a:efe8 Onda (unverified) V972 tablet in flashing mode
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
vagrant@vagrant-ubuntu-trusty-32:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-107-generic (buildd@lcy01-29) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #154-Ubuntu SMP Mon Dec 19 19:20:26 UTC 2016 (Ubuntu 3.13.0-107.154-generic 3.13.11-ckt39)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ A bunch of memory map stuff eliminated to make this message fit. If you need to see it, let me know... ]
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f73e9000 s35520 r0 d21824 u57344
[ 0.000000] pcpu-alloc: s35520 r0 d21824 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260246
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-107-generic root=UUID=786bc2de-5670-4ef5-a5f1-2bb789ac0713 ro console=tty1 console=ttyS0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x440
[ 0.000000] allocated 2097016 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0)
[ 0.000000] Memory: 1000892K/1048120K available (6587K kernel code, 642K rwdata, 2780K rodata, 884K init, 924K bss, 47228K reserved, 135112K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19c9000 - 0xc1aa6000 ( 884 kB)
[ 0.000000] .data : 0xc166f24a - 0xc19c8900 (3429 kB)
[ 0.000000] .text : 0xc1000000 - 0xc166f24a (6588 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2593.565 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.13 BogoMIPS (lpj=10374260)
[ 0.000833] pid_max: default: 32768 minimum: 301
[ 0.001300] Security Framework initialized
[ 0.001691] AppArmor: AppArmor initialized
[ 0.002156] Yama: becoming mindful.
[ 0.002505] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002972] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003550] Initializing cgroup subsys memory
[ 0.003916] Initializing cgroup subsys devices
[ 0.004282] Initializing cgroup subsys freezer
[ 0.004647] Initializing cgroup subsys blkio
[ 0.004955] Initializing cgroup subsys perf_event
[ 0.005052] Initializing cgroup subsys hugetlb
[ 0.005524] CPU: Physical Processor ID: 0
[ 0.008000] mce: CPU supports 0 MCE banks
[ 0.008078] process: using mwait in idle threads
[ 0.008631] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008631] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.008631] tlb_flushall_shift: 6
[ 0.026429] Freeing SMP alternatives memory: 32K (c1aa6000 - c1aae000)
[ 0.028055] ACPI: Core revision 20131115
[ 0.030531] ACPI: All ACPI Tables successfully acquired
[ 0.031515] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.032952] ftrace: allocating 27950 entries in 55 pages
[ 0.060092] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.060627] smpboot: SMP motherboard not detected
[ 0.061029] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.168146] smpboot: SMP disabled
[ 0.168487] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[ 0.170471] x86: Booted up 1 node, 1 CPUs
[ 0.170825] smpboot: Total of 1 processors activated (5187.13 BogoMIPS)
[ 0.171304] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.171816] devtmpfs: initialized
[ 0.172217] EVM: security.selinux
[ 0.172534] EVM: security.SMACK64
[ 0.172851] EVM: security.ima
[ 0.173222] EVM: security.capability
[ 0.174111] pinctrl core: initialized pinctrl subsystem
[ 0.174553] regulator-dummy: no parameters
[ 0.174852] RTC time: 18:41:15, date: 02/02/17
[ 0.175293] NET: Registered protocol family 16
[ 0.176075] EISA bus registered
[ 0.176140] cpuidle: using governor ladder
[ 0.177252] cpuidle: using governor menu
[ 0.177570] ACPI: bus type PCI registered
[ 0.178021] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.178605] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.178874] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.179422] PCI: Using configuration type 1 for base access
[ 0.181115] bio: create slab at 0
[ 0.181623] ACPI: Added _OSI(Module Device)
[ 0.181978] ACPI: Added _OSI(Processor Device)
[ 0.182343] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.182719] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183515] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.184973] ACPI: Interpreter enabled
[ 0.185359] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State _S1_
[ 0.186232] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State _S2_
[ 0.187021] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State _S3_
[ 0.187814] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State _S4_
[ 0.188613] ACPI: (supports S0 S5)
[ 0.188933] ACPI: Using PIC for interrupt routing
[ 0.189393] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.190175] ACPI: No dock devices found.
[ 0.193236] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.193758] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.194320] acpi PNP0A03:00: OSC failed (AENOT_FOUND); disabling ASPM
[ 0.194947] acpi PNP0A03:00: host bridge window io 0x0000-0x0cf7
[ 0.194949] acpi PNP0A03:00: host bridge window io 0x0d00-0xffff
[ 0.194950] acpi PNP0A03:00: host bridge window mem 0x000a0000-0x000bffff
[ 0.194952] acpi PNP0A03:00: host bridge window mem 0x40000000-0xffdfffff
[ 0.194954] PCI: root bus 00: using default resources
[ 0.194956] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.196042] PCI host bridge to bus 0000:00
[ 0.196454] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.196965] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.197432] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 0.197939] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.198667] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.199020] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.199243] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.199446] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.200154] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.203641] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.203971] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
[ 0.204512] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
[ 0.205847] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.206145] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
[ 0.206419] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 0.206692] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 0.207977] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.208292] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[ 0.213610] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.213882] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
[ 0.214701] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
[ 0.215349] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.215848] pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
[ 0.218315] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.218668] pci 0000:00:0d.0: reg 0x10: [io 0xd040-0xd047]
[ 0.219217] pci 0000:00:0d.0: reg 0x18: [io 0xd050-0xd057]
[ 0.219736] pci 0000:00:0d.0: reg 0x20: [io 0xd060-0xd06f]
[ 0.219999] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[ 0.220586] pci_bus 0000:00: on NUMA node 0
[ 0.221082] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.221877] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.222590] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.224020] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.224713] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.224852] ACPI: _SB_.PCI0: notify handler is installed
[ 0.224861] Found 1 acpi root devices
[ 0.224988] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.225587] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.226358] vgaarb: loaded
[ 0.226679] vgaarb: bridge control possible 0000:00:02.0
[ 0.227301] SCSI subsystem initialized
[ 0.227800] libata version 3.00 loaded.
[ 0.227821] ACPI: bus type USB registered
[ 0.228234] usbcore: registered new interface driver usbfs
[ 0.228705] usbcore: registered new interface driver hub
[ 0.229192] usbcore: registered new device driver usb
[ 0.230501] PCI: Using ACPI for IRQ routing
[ 0.230864] PCI: pci_cache_line_size set to 64 bytes
[ 0.231322] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.231373] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[ 0.231550] NetLabel: Initializing
[ 0.232011] NetLabel: domain hash size = 128
[ 0.232125] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.232609] NetLabel: unlabeled traffic allowed by default
[ 0.233267] Switched to clocksource refined-jiffies
[ 0.237006] AppArmor: AppArmor Filesystem Enabled
[ 0.237402] pnp: PnP ACPI init
[ 0.237715] ACPI: bus type PNP registered
[ 0.238098] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.238102] pnp 00:01: [dma 4]
[ 0.238110] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.238134] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.238424] pnp: PnP ACPI: found 3 devices
[ 0.238777] ACPI: bus type PNP unregistered
[ 0.239171] PnPBIOS: Disabled by ACPI PNP
[ 0.275046] Switched to clocksource acpi_pm
[ 0.275468] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.275470] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 0.275493] NET: Registered protocol family 2
[ 0.276035] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.276549] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.277088] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.277585] TCP: reno registered
[ 0.277925] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278380] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278881] NET: Registered protocol family 1
[ 0.279273] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.279842] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.280297] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.280775] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.281283] PCI: setting IRQ 11 as level-triggered
[ 0.282286] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.282738] PCI: setting IRQ 10 as level-triggered
[ 0.283018] PCI: CLS 0 bytes, default 64
[ 0.283149] Trying to unpack rootfs image as initramfs...
[ 0.610691] Freeing initrd memory: 24096K (f50e0000 - f6868000)
[ 0.611199] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.611199] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x0
[ 0.612358] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 0.613125] Scanning for low memory corruption every 60 seconds
[ 0.613810] Initialise system trusted keyring
[ 0.614297] audit: initializing netlink socket (disabled)
[ 0.614735] type=2000 audit(1486060875.491:1): initialized
[ 0.633019] bounce pool size: 64 pages
[ 0.633401] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.634419] zbud: loaded
[ 0.634814] VFS: Disk quotas dquot_6.5.2
[ 0.635247] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.635886] fuse init (API version 7.22)
[ 0.636236] msgmni has been set to 1738
[ 0.636580] Key type big_key registered
[ 0.637084] Key type asymmetric registered
[ 0.637445] Asymmetric key parser 'x509' registered
[ 0.637844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.638485] io scheduler noop registered
[ 0.638830] io scheduler deadline registered (default)
[ 0.639236] io scheduler cfq registered
[ 0.639683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.640135] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.640614] intel_idle: does not run on family 6 model 94
[ 0.640617] ipmi message handler version 39.2
[ 0.641071] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.641739] ACPI: AC Adapter AC
[ 0.642246] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.642807] ACPI: Power Button [PWRF]
[ 0.643141] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 0.643672] ACPI: Sleep Button [SLPF]
[ 0.644045] GHES: HEST is not enabled!
[ 0.644415] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.645425] Linux agpgart interface v0.103
[ 0.646464] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.647219] ACPI: Battery Slot [BAT0] (battery present)
[ 0.647748] isapnp: Scanning for PnP cards...
[ 0.698373] brd: module loaded
[ 0.743251] loop: module loaded
[ 0.743657] ata_piix 0000:00:01.1: version 2.13
[ 0.743852] scsi0 : ata_piix
[ 0.744180] scsi1 : ata_piix
[ 0.744579] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.745051] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.745820] libphy: Fixed MDIO Bus: probed
[ 0.746386] tun: Universal TUN/TAP device driver, 1.6
[ 0.746778] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.747235] PPP generic driver version 2.4.2
[ 0.748314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.748748] ehci-pci: EHCI PCI platform driver
[ 0.749526] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 0.749930] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 0.750651] ehci-pci 0000:00:0b.0: irq 10, io mem 0xf0805000
[ 0.795744] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 0.886204] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.886685] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887428] usb usb1: Product: EHCI Host Controller
[ 0.887812] usb usb1: Manufacturer: Linux 3.13.0-107-generic ehci_hcd
[ 0.888333] usb usb1: SerialNumber: 0000:00:0b.0
[ 0.888792] hub 1-0:1.0: USB hub found
[ 0.889133] hub 1-0:1.0: 12 ports detected
[ 0.889686] ehci-platform: EHCI generic platform driver
[ 0.890091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.890581] ohci-pci: OHCI PCI platform driver
[ 0.891664] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 0.892134] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 0.892780] ohci-pci 0000:00:06.0: irq 11, io mem 0xf0804000
[ 0.938553] ata1.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 0.939273] ata1.00: configured for UDMA/33
[ 1.029522] isapnp: No Plug & Play device found
[ 1.030146] scsi 0:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.030962] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.031486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032194] usb usb2: Product: OHCI PCI host controller
[ 1.032593] usb usb2: Manufacturer: Linux 3.13.0-107-generic ohci_hcd
[ 1.033093] usb usb2: SerialNumber: 0000:00:06.0
[ 1.033890] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.034392] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.034879] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.034915] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.035449] hub 2-0:1.0: USB hub found
[ 1.035793] hub 2-0:1.0: 12 ports detected
[ 1.036320] ohci-platform: OHCI generic platform driver
[ 1.036765] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.037250] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.038257] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.038647] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.039143] mousedev: PS/2 mouse device common for all mice
[ 1.039900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.041078] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.041502] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.041987] device-mapper: uevent: version 1.0.3
[ 1.042390] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.043073] platform eisa.0: Probing EISA bus 0
[ 1.043454] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.043914] platform eisa.0: EISA: Detected 0 cards
[ 1.044300] cpufreq-nforce2: No nForce2 chipset.
[ 1.044675] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.044815] TCP: cubic registered
[ 1.045195] NET: Registered protocol family 10
[ 1.045759] NET: Registered protocol family 17
[ 1.046157] Key type dns_resolver registered
[ 1.046669] Using IPI No-Shortcut mode
[ 1.047055] Loading compiled-in X.509 certificates
[ 1.049362] Loaded X.509 cert 'Magrathea: Glacier signing key: 9480fc27b1a1d69e87a4facd6dad1ccfa3c12015'
[ 1.050122] registered taskstats version 1
[ 1.051653] Key type trusted registered
[ 1.054530] Key type encrypted registered
[ 1.054881] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.055378] IMA: No TPM chip found, activating TPM-bypass!
[ 1.056278] regulator-dummy: disabling
[ 1.056711] Magic number: 5:167:695
[ 1.057071] pci 0000:00:00.0: hash matches
[ 1.057452] rtc_cmos rtc_cmos: setting system clock to 2017-02-02 18:41:16 UTC (1486060876)
[ 1.058228] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.058661] EDD information not available.
[ 1.059025] PM: Hibernation image not present or could not be loaded.
[ 1.059154] Freeing unused kernel memory: 884K (c19c9000 - c1aa6000)
[ 1.059628] Write protecting the kernel text: 6592k
[ 1.060044] Write protecting the kernel read-only data: 2784k
[ 1.060466] NX-protecting the kernel data: 5696k
[ 1.075072] systemd-udevd[97]: starting version 204
[ 1.089285] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.089774] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.096101] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.096655] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.415220] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:e2:90:6e
[ 1.415783] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.416867] ahci 0000:00:0d.0: version 3.0
[ 1.417422] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1.417996] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 1.418548] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.419209] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.426618] scsi2 : ahci
[ 1.426970] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
[ 1.591465] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.593729] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 1.602943] tsc: Refined TSC clocksource calibration: 2589.781 MHz
[ 1.682954] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 1.747124] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.749156] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.750790] ata3.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.753268] ata3.00: configured for UDMA/133
[ 1.754985] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.758067] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[ 1.760607] sd 2:0:0:0: [sda] Write Protect is off
[ 1.762111] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.762600] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.764566] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.767892] sda: sda1
[ 1.769001] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.952665] usb 2-1: New USB device found, idVendor=1f3a, idProduct=efe8
[ 1.954855] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.602937] Switched to clocksource tsc
[ 3.038347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.093690] random: init urandom read with 40 bits of entropy available
[ 3.224934] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.901620] systemd-udevd[437]: starting version 204
[ 3.975978] vboxguest: module verification failed: signature and/or required key missing - tainting kernel
[ 3.985359] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 3.985377] PCI: setting IRQ 9 as level-triggered
[ 3.996295] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
[ 3.996385] vboxguest: misc device minor 57, IRQ 9, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
[ 3.996385] vboxguest: Successfully loaded version 4.3.36_Ubuntu (interface 0x00010004)
[ 3.998107] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
[ 4.026936] type=1400 audit(1486060879.466:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=470 comm="apparmor_parser"
[ 4.026940] type=1400 audit(1486060879.466:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
[ 4.026943] type=1400 audit(1486060879.466:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[ 4.101629] [drm] Initialized drm 1.1.0 20060810
[ 4.156581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.158384] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 4.158624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.215351] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 4.215753] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[ 4.280685] random: nonblocking pool is initialized
[ 5.274082] FS-Cache: Loaded
[ 5.320505] RPC: Registered named UNIX socket transport module.
[ 5.320507] RPC: Registered udp transport module.
[ 5.320508] RPC: Registered tcp transport module.
[ 5.320509] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.374186] FS-Cache: Netfs 'nfs' registered for caching
[ 5.419866] init: failsafe main process (758) killed by TERM signal
[ 5.434713] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.678039] type=1400 audit(1486060881.118:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=921 comm="apparmor_parser"
[ 5.678044] type=1400 audit(1486060881.118:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=921 comm="apparmor_parser"
[ 5.678046] type=1400 audit(1486060881.118:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=921 comm="apparmor_parser"
[ 5.684711] type=1400 audit(1486060881.126:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=923 comm="apparmor_parser"
[ 6.063947] vboxsf: Successfully loaded version 4.3.36_Ubuntu (interface 0x00010004)
[ 6.066344] VBoxService 4.3.36_Ubuntu r105129 (verbosity: 0) linux.x86 (Jan 27 2016 11:56:27) release log
[ 6.066344] 00:00:00.000063 main Log opened 2017-02-02T18:41:21.512580000Z
[ 6.067552] 00:00:00.001249 main OS Product: Linux
[ 6.068359] 00:00:00.002106 main OS Release: 3.13.0-107-generic
[ 6.068386] 00:00:00.002144 main OS Version: #154-Ubuntu SMP Mon Dec 19 19:20:26 UTC 2016
[ 6.068408] 00:00:00.002167 main OS Service Pack: #154-Ubuntu SMP Mon Dec 19 19:20:26 UTC 2016
[ 6.068445] 00:00:00.002190 main Executable: /usr/sbin/VBoxService
[ 6.068445] 00:00:00.002191 main Process ID: 1047
[ 6.068445] 00:00:00.002192 main Package type: LINUX_32BITS_GENERIC (OSE)
[ 6.072958] 00:00:00.006708 main 4.3.36_Ubuntu r105129 started. Verbose level = 0
[ 7.410944] init: plymouth-upstart-bridge main process (202) killed by TERM signal
I've also noticed that I keep receiving:
during the 'virtual up' operation. I am r to try an update to the virtual box aditions just to see what happens.
Fortuately, if anything goes wrong, I can just start over from scratch. I just love virtual machines.