Jordan Innovations is excited to bring you the new flagship standalone product from AEM.
AEM Infinity Specification Chart
http://www.aemelectronics.com/files/...ions_Chart.pdf
TECHNOLOGY
The Infinitys primary automotive MCU is a 200 MHz, 32 bit processor with a math co-processor. It is able to process 400 MIPS. It includes up to 12 peak and hold injector drivers and up to 12 ignition outputs. Infinitys USB technology downloads up to 480 Mb/second. The enclosure and connectors are sealed and suitable for engine bay mounting. It features a fully-sealed IP67 rated connection system.
It's fast. Really fast.
InfinityTuner USER INTERFACE SOFTWARE
InfinityTuner features custom layouts, an ECU Setup Wizard, and data logging playback mode where all controls are synched to the logged data. This allows you to edit calibration data exactly where you need to and minimize your tuning time. AEMdata data logging analysis software is also included.
The best/most versatile tuning software around, and it's always getting better.
AIRFLOW MODEL BASED CALCULATIONS
Infinity system base models are airflow based and feature various modes for calculating air flow. This eliminates many of the lookup and trim tables (Correction Tables) which are necessary in previous generation ECUs.
Like new OEM ECU's, it figures out airflow first and makes calculations based on that ~ no correction tables or trims! The car runs how it was tuned to run, no matter what the air's like.
FUEL CONTROL & IGNITION TIMING
The Infinity EMS calculates injector pulsewidth in units of 1/10th of a microsecond (0.0000001 second) and has NO practical crank tooth resolution limit. The Infinitys back-end timing code is tested to 100,000 RPM.
Boom. Told you it was fast.
DATA LOGGING
Log 10 channels at up to 1KHz, 20 channels at up to 500Hz or 100 channels at up to 200Hz standard. Log 100 channels at up to 1 KHz using a high performance USB flash drive. An included 4GB USB memory stick can be replaced with one up to 64GB. Users can also log direct to the PC at up to 500Hz.
Oh, you want to log 100 channels at 1000 frames per second? For hours on end? Then just pull out a USB stick and plug it into the computer? And that's included with no upcharge?
No problem. Try that with your Motec.
DUAL INTERNAL WIDEBAND CONTROLLER
A built-in 2-channel Bosch wideband controller with automatic closed-loop heater control optimizes sensor performance and reliability. Full diagnostics software ensures reliable operation.
Plug in your Bosch o2 sensors and start tuning, no gauges/controllers to buy, no extra boxes to zip tie under your dash.
FLEX FUEL COMPENSATION
The Infinitys core control model is designed for flex fuel compatibility. It makes automatic adjustments for ethanol content and applies them to fuel flow, ignition timing and boost target (ethanol content sensor is sold separately).
MULTI-FUEL CAPABLE
The infinity has the ability to run two separate fuel types simultaneously through staged fuel injection.
These two are HUGE. HUGE. Instead of having to switch maps for different fuels, the Infinity can move seamlessly and automatically between pump gas/race gas, pump gas/e85, gas + meth, etc while changing fuel, timing, and boost, with failsafes along the way. This versatility is WILD for boosted cars!
DUAL KNOCK SENSING
Dual knock signal conditioning circuits allow for precise measurements of knock levels.
What's better than one knock sensor? Two.
INTERNAL SIMULATOR
A powerful input simulator feature allows the user to simulate operating conditions. This allows users to validate tuning changes before running the engine.
This seems silly, but it's not. When you do what we do, you need to be able to test everything before releasing it to the customer. Does the meth injection properly scale the boost back when the tank is empty? Lets simulate that, rather than testing it on the dyno and risking the engine.
REAL-TIME ADVANCED DIAGNOSTICS
The Infinitys diagnostics software constantly monitors signal and current quality to alert the user of an issue before it creates the potential for engine damage.
INTEGRATED ENGINE PROTECTION STRATEGIES
Available strategies are based on boost fuel cut, fuel pressure (injector flow compensated for variations in pressure, sensor required), oil pressure, RPM (rev limiter), coolant temperature, knock control with feedback and lean protection.
This is the new wave in EMS's - it's not enough to have amazing flexibility and the precision to make a ton of power, you've got to make sure it's reliable and easy to tell when something's wrong. This is KILLER functionality and cheap insurance when you consider what the engine costs.
INFINITY EMS CAPABILITIES:
-Airflow model based calculations
-Fuel control resolution to 1/10th of a microsecond (.0000001 sec)
-Multi-fuel capable
-Flex fuel compensated fuel, ignition and boost with blend
-Open-loop fuel pressure compensation
-Ignition table, 20x20
-VE airflow table, map vs. engine speed, 20x20
-Configurable coil dwell (RPM, voltage and load based)
-Individual cylinder ignition trim (RPM based)
-Individual cylinder fuel trim (RPM based)
-3D ignition trim maps (coolant and air temp)
-VE-based engine startup
-Real-time sensor diagnostics
-Integrated engine protection strategies
-Dual internal wideband controllers
-Target Lambda table, 10x10
-User adjustable charge temperature blend (CLT/AIT, engine speed dependent)
-O2 lean-out protection
-Electronic boost control (time based or target based)
-Idle control (stepper and pulsewidth)
-Programmable traction control, 2-wheel speed or engine acceleration (4-wheel speed with Advanced Tuning Option)
-2-channel adaptive knock control
-2-step programmable launch control (3-step with Advanced Tuning Option)
-No-lift shifting (Requires Advanced Tuning Option)
-User configurable soft-cut rev limiters
-User configurable anti-lag
-Single stage wet or dry nitrous control coming soon (3-stage with Advanced Tuning Option, coming soon)
ADVANCED TUNING PACKAGE:
Advanced Tuning Functions:
No-lift shift
4-wheel speed traction control
3-step launch control
Drive by wire (application dependent, coming soon)
3-stage nitrous control (coming soon)
Advanced Tuning Hardware Outputs:
1 high side driver (coming soon)
2 H-bridge channels
Advanced Tuning Inputs:
2 analog voltage inputs (4 additional coming soon)
2 VR/Mag differential pair inputs
1 digital/frequency input (coming soon)
3 analog temp inputs (coming soon)
So here's the deal... we've wired and had success with just about every standalone product on the market, on a ton of engines. That experience has given us a pretty good idea of what functionality people are looking for, and our background helps us to know the best tools to get there.
The Infinity EMS is not only the fastest thing in town, it will support dual drive-by-wire throttle bodies, DBW traction control, the flexibility to seamlessly support any fuel mix you want to run (or switch between two fuels), and do it all with the reliability/peace-of-mind from the failsafes and diagnostics.
These literally just came out. We're still getting word from AEM on pricing and when the more affordable 6-cylinder versions will be out, but since these will require custom specs and harnesses, you know Jordan Innovations is the place to go.