Price: £84.89
Blade mSR Micro Flybar RC Helicopter with 2.4Ghz Transmitter (Ready to Fly)
The Blade mSR is a single rotor, ultra-micro helicopter weighing in at less than one ounce ready to fly. Whilst the unique rotor head design provides inherent stability similar to a traditional coaxial helicopter, the fixed-pitch bell-hiller design makes the helicopter much more responsive, thus providing the agility found with single-rotor designs.
The unsurpassed blend of agility and stability makes the Blade mSR manageable for the ascending heli pilot, yet the incredible control attributed to the single rotor design also makes the mSR desirable for experienced pilots as well. With its compact, 7-inch rotor span, the mSR once again makes indoor heli flight a reality.
This ready-to-fly version of the Blade mSR comes 100% factory-assembled, flight-tested and ready to go right out of the box - no assembly or setup is required. Included in the box is the heli, 4-channel 2.4Ghz transmitter equipped with Spektrum 2.4GHz DSM2/DSMX technology, a 150mAh LiPo battery and a DC flight battery charger. Batteries for the transmitter and charger are also included in addition to a selection of spare parts and a swash calibration tool.
Features
The ideal next step for coaxial heli pilots ready for single-rotor flight
Fixed-pitch, Bell Hiller rotor head delivers nimble response and hands-off stability
Durable lightweight airframe
5-in-1 DSMX® receiver/ESC/mixer/servos and gyro unit
4 channel 2.4 GHz DSM2/DSMX transmitter with batteries
DC LiPo charger with batteries
Specification:
Completion Level - Ready-to-Fly
Number of Channels - 4
Recommended Environment - Indoor
Rotor Type - Fixed Pitch Single Rotor
Size/Scale - Ultra Micro
Tail Drive - Direct
Battery - 1S 3.7V 150mAh 25C Li-Po
Height - 3.2" (83mm)
Length - 7.5" (190mm)
Tail Rotor Diameter - 1.5" (37mm)
Main Rotor Diameter - 7.0" (180mm)
Flying Weight - 1.1 oz (31g)
In the Box
Blade mSR Micro Flybar RC Helicopter (Ready to Fly)
E-flite 1S 3.7V 150mAh 25C LiPo battery
4 Channel 2.4GHz DSM2/DSMX Transmitter
8AA Batteries for the Transmitter & Charger
Required to Complete
Nothing at all, Everything is in the box
To charge batteries from an AC 240v outlet, you will need an AC to 6V DC power supply (EFLC1005)