voltagevapin.com
We love to pair up odd items here at Voltage Vapin’, but we make odd GREAT!
Pairings like the CLK and the Aspire Nautilus!
Welcome to the iTaste CLK1280. This is a great starter battery from Innokin with variable voltage and you can vape while it’s charging.
The Primary Features:
Battery Level Indicator: The iTaste CLK battery capacity is displayed via green, yellow and red LED lights. When the iTaste CLK 1280 battery is fully charged the LED light on the firing button will turn green and power off.
Green = Fully Charged
Yellow = Half Power.
Red = Low Power. Please Charge.
Large battery capacity: The iTaste CLK1280 has a built-in 1280 mAh polymer Li-Ion rechargeable battery.
ON/OFF battery switch: Press the power button three times in rapid succession to turn on the iTaste CLK 1280. Once the iTaste CLK 1280 is On hold down the power button to activate the atomizer and vape. When the iTaste CLK 1280 is not in use press the power button three times in succession to power off the iTaste CLK 1280. Always power off the iTaste CLK when it is not being used, or when it is going to be stored in a pocket, bag or purse.
Short Circuit/Atomizer Protection: Short Circuit/Atomizer Protection protects the iTaste CLK 1280 against shorted atomizers and will stop the unit from functioning in unsafe conditions.
Over-Discharge Protection: The iTaste CLK 1280 monitors the battery voltage and will automatically power off when the battery is discharged.
Technical Specifications:
Variable Voltage: The rotational wheel adjusts voltage in the following increments: 3.5, 3.8, 4.0, 4.3, 4.5, 4.8, 5.0
The red LED will blink six times and turn off if the rotational wheel is not in place.
To set your desired voltage turn the rotational wheel to the left or right until you hear an audible click. When adjusting the voltage with the rotational wheel always check to ensure the wheel is set to your desired voltage.
Standby current: 50uA max
Maximum output current: 3.5A
Maximum output wattage: 15W
Clearomizer Resistance: 1.2 ohm (minimum), recommendation 2.5Ohm
Battery: Built-in 1280 mAh polymer Li-Ion rechargeable battery.
Charging: Micro USB DC5V/500mA
Short Circuit Protection: 0.6 +/-0.2 ohm
Aspire Nautilus
The Nautilus is the next generation of tank systems. Made of stainless steel and pyrex glass, the Nautilus also uses the Aspire BDC (bottom dual coil) atomizer technology. The Nautilus has an exclusive adjustable airflow design that is revolutionary. With a simple turn of the lower ring, you have four options for airflow level…
510 Threaded
Adjustable Airflow
5ml Capacity
Replaceable glass tank
Replaceable dual bottom coil
510 Drip tip compatible
3-1/4″L x 7/8″D
Put these two together… and you’re ready to conquer the vape game!
So Odd, but so right!
Try this odd pairing at Voltage Vapin’ today!
How about the Odd pairing of the Mini Volt and the Pangu Tank?
The Council of Vapor Mini Volt 40W Box Mod is one of the smallest mid wattage output devices ever released, featuring 5 to 40W of output power and a 1300 mAh battery, a 0.2 ohm minimum resistance rating, three selectable wattage curves, and a two line OLED display. This allows the Mini Volt to effectively power many of today’s premiere compact and midwattage Sub-Ohm Tanks while remaining small enough to completely enclose in one hand. The chipset also features three adjustable power curves corresponding to ramp time, allowing users more precisely tune experience. The 1300 mAh battery provides great range for the size of the device, making it a perfect device to take on a night out or on short commutes. The chassis features a rubberized coating that provides a comfortable grip and feel, with carbon fiber accenting to provide a stylish visual contrast. With a remarkably small form factor, ample power and range, and a well built chassis, the Council of Vapor Mini Volt 40W Box Mod makes for the perfect side carry.
Product Features:
5 to 40W
0.2 ohm Minimum Atomizer Resistance
Adjustable in 0.1W increments
Three Selectable Output Modes
1300 mAh Battery
Chargeable Via Micro USB Port
Ultra Compact Form Factor
35mm by 22mm by 56mm
OLED Display Screen
Three Line Display
Output
Atomizer Resistance
Battery Life Indicator
Carbon Fiber Wrap
Rubberized Finish
Spring Loaded 510 Connection
The Kanger Pangu Tank
The Kangertech Pangu Tank has a cool, unique coil design where the coils are the whole the chimney device but the coil itself is at the bottom of the chimney so there is no need to worry about spitback while still getting that crazy good flavor that chimney coils are known for. It utilizes the ever so popular SSOCC 0.5 ohm coil by kangertech but is a different set of coils due the chimney being part of it. What is new about the pangu tank is that it also has liquid flow control with a no leak design where you can change the coil without draining your liquid as well as it being a top fill tank.
Holds 3.5ml’s of liquid
Unique Chimney Coil design
Top Fill
SSOCC 0.5 ohm coil
Nichrome 1.5 ohm coils
Liquid flow control valve
Can Replace the coil with a full tank
22mm tank
2 airflow slots with adjustments
The New Kangertech Pangu tank, Great for on the go with a surprising hit now at Voltage Vapin’!
And Together… odd, but GREAT pairing!
Isn’t it Glorious?
Now let’s get really odd… with Beard Vape!
We are full of flavors at Voltage Vapin’! Of course if we’re talking about it, you know we’re hyped, and these e-liquid flavors are undeniably great!
First off is The Beard Co.’s No. 32 and No. 5!
No. 32 is a Funnel Cake with cinnamon, and the description is spot on. Easily a great go-to flavor for those that are looking for subtlety in their vape. All day vape without a doubt!
No. 5 is the Cheesecake Strawberry of dreams, and when you vape this goodness, there’s no doubt you’ll be back for more. With all the cheesecake on the inhale and strawberry on the exhale, No. 5 is a great oasis to wind down your day.
NOW… what if you were to put these vastly different flavors in the Same Tank? That one we’ll let you imagine! Try it today at Voltage Vapin’!
Please make sure you have your I.D. present when entering the store. We are now required by law to I.D. anyone who appears to be 27 years of age or younger.
We apologize for any inconvenience this may cause but if you do not have a valid ID stating that you are 18 or over we can not let you test any products or make any sales to you. Please have your valid ID ready and understand we are just following the law. Thank you in advance for your understanding.
We still allow customers to bring their children in, as long as they are supervised by their parents. No one under 18 will be allowed in the sales counter area. Before anyone can test liquid or make a purchase, they must present I.D., if asked. We also do not allow parents to purchase for minors. We are just reinforcing our I.D. Policy at Voltage Vapin’ so that you as a customer understands why we ask to show I.D. This Policy has now become a federal law so it is imperative that we continue to do this in order to keep the industry where it is now.
We check I.D.’s for everything we sell in the shop as well, not just liquids and devices. Chargers, Accessories, ETC all count.
We value all of our customers and strive to give the best customer service in the industry. Thank you for being a valued customer.
File under:
odd