Description:
phone 980 613 5276
(Separate Pressurized Solar Collector)
price $1500 free shipping 200-300 liters
Products Model：SC-C01(Separate Pressurized Solar Collector)
system is srcc for tax rebate fed 30%
Products Intro：
SC-C01
SC-C01(Separate Pressurized Solar Collector)
The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in
vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength
with air flow design. It is furnished in good style.
Can endure high pressure when it works.
Module design, optional combination, which can meet the demand of large water consumption.
* Material: Aluminum alloy
* Solar vacuum tube with heat pipe
a) Size: 58 x 1,800mm
b) Qty of tube: 15 / 20 / 25/30pcs
c) Hail resistance: diameter 25mm
* Insulation layer in chest
a) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high
pressure foam
b) Heat preservation: 72 hours
* Max. pressure bearing: 0.6MPa
* ISO9001 / CE certificate/EN-12975
* 20 years international responsibility for free repairing or exchange due to original quality problems
1, Manifold : red copper
2, Manifold Casing: aluminum alloy
3, Glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m
4, Heat preservation: 72hrs
5, Hail resistance: 25mm
6, max pressure: 10 bar
7, working pressure: 6 bar
8, Coating of vacuum tube: SS-C/CU
9, Heat Pipe: anti-freezing > -35°C
Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of
heat. By the design the water never Come into vacuum tube immediately so the tube will never be broken in
low temperature in winter. We use this type for separate pressurized system or integrative pressurized system.
High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat
absorption rate can reach more than 93%, certify enough power for hot water request.
Working Principle：
SunSurfs solar thermal collectors use fluid circulation (usually water or an antifreeze solution) to transfer the
heat for direct use or storage in an insulated tank . Water/glycol has a high thermal capacity and is perfer in
cold climates. The direct radiation is captured via the evacuated tubes absorbs the radiation as heat and
conducts it to heat pipe then the transfer fluid in the manifold made of copper. Metal makes a good thermal
conductor, especially copper and aluminium. The fluid carries away the absorbed heat, thus cooling the
manifold (see fig 2 above). The warmed fluid leaving the collector is either directly stored, or else passes
through a heat exchanger to warm another tank of water, or is used to heat a building directly. The
temperature differential across an efficient solar collector is usually only 10 or 20°C. While a large differential
may seem impressive, it is in fact an indication of a less efficient design.