2014-03-18

Ford’s Hemp powered Hemp made Car

“Each acre of hemp could yield about 1000 gallons”

“30 Barrels of (Hemp) Oil Per Acre”

“Enough energy could be produced on 6% of the land in the U.S. to provide enough energy for our entire country (cars, heat homes, electricity, industry).

To put that in perspective, right now we pay farmers not to grow on 6% (around 90 million acres) of the farming land, while another 500 million acres of marginal farmland lies fallow. This land could be used to grow hemp as an energy crop.”

Excerpt: Green Visionary Henry Ford and his Predictions about Ethanol and Hemp based fuels.

***

Using the above figures, 100 million acres of marginal land could produce 100 billion gallons of bio-fuel…(3)three times a year, or 300 billion gallons per year.

To put that into perspective;

According to the federal government’s energy.gov website the US consumed approximately 140 billion gallons of gasoline in 2004.

U.S. motor gasoline consumption peaked at 142 billion gallons in 2007. In each year since, American drivers have used less gasoline. In 2012, gas use came in at 134 billion gallons, down 6 percent off the high mark.

- earth-policy.org



“All this Media Hype about Medical/Recreational Marijuana is a Smoke Screen to Hide the True Issues.

Medical/Recreational Marijuana won’t help us, our economy, our Country, the lives of our Service People(Oil Wars), or the massive environmental issues/problems with Oil(spills/greenhouse gases) or hydraulic fracturing, as much as Industrial Hemp will and can!”

“It’s time to take a stand!

$4-$5+ dollars per gallon of gasoline, plus the death of our service people and environmental destruction or $00.50 cents per gallon of Industrial Hemp Bio-Fuel produced in America, with no Oil Wars, and a 3.5 times increase in Jobs over the current system. You decide!” – T.D.P. Admin.

***



Green Visionary Henry Ford and his Predictions about Ethanol and Hemp based fuels

Henry Ford believed in using Hemp products to make cars. He was green 50 years before GREEN was cool.Picture 6

Henry Ford predicted back in 1925 that the future fuels used to power automobiles, trucks, planes, and power boat engines would come from sustainable and more eco-friendly resources than fossil fuels. He even aggressively supported the use of hemp products to create bio-degradable auto parts.

With so many changes happening in the auto industry, companies like Fisker and Tesla working on electric models, motorsports competitors participating in Formula 3 Racing looking closely at bio-fuels, big name exotics company leaders like Ferrari — who participate in Formula 1 and are planning to release hybrid exotics on the market soon as alternative power source vehicles, sportscar companies like BMW releasing Hydrogen cars, and luxury car companies like Lexus promoting hybrid model daily drivers are finally beginning to provide consumers that are making life more green while keeping owners on the go.

Fuel of the Future

When Henry Ford told a New York Times reporter that ethyl alcohol was “the fuel of the future” in 1925, he was expressing an opinion that was widely shared in the automotive industry. “The fuel of the future is going to come from fruit like that sumach out by the road, or from apples, weeds, sawdust — almost anything,” he said. “There is fuel in every bit of vegetable matter that can be fermented. There’s enough alcohol in one year’s yield of an acre of potatoes to drive the machinery necessary to cultivate the fields for a hundred years.”

Ford recognized the utility of the hemp plant. He constructed a car of resin stiffened hemp fiber, and even ran the car on ethanol made from hemp. Ford knew that hemp could produce vast economic resources if widely cultivated.

Ford’s optimistic appraisal of cellulose and crop based ethyl alcohol fuel can be read in several ways.

First, it can be seen as an oblique jab at a competitor. General Motors had come to considerable grief that summer of 1925 over another octane boosting fuel called tetra-ethyl lead, and government officials had been quietly in touch with Ford engineers about alternatives to leaded gasoline additives.

Secondly, by 1925 the American farms that Ford loved were facing an economic crisis that would later intensify with the depression. Although the causes of the crisis were complex, one possible solution was seen in creating new markets for farm products. With Ford’s financial and political backing, the idea of opening up industrial markets for farmers would be translated into a broad movement for scientific research in agriculture that would be labelled “Farm Chemurgy.”

Why Henry’s plans were delayed for more than a half century

Ethanol has been known as a fuel for many decades. Indeed, when Henry Ford designed the Model T, it was his expectation that ethanol, made from renewable biological materials, would be a major automobile fuel. However, gasoline emerged as the dominant transportation fuel in the early twentieth century because of the ease of operation of gasoline engines with the materials then available for engine construction, a growing supply of cheaper petroleum from oil field discoveries, and intense lobbying by petroleum companies for the federal government to maintain steep alcohol taxes.

Many bills proposing a National energy program that made use of Americas vast agricultural resources (for fuel production) were killed by smear campaigns launched by vested petroleum interests. One noteworthy claim put forth by petrol companies was that the U.S. government’s plans “robbed taxpayers to make farmers rich”.

Gasoline had many disadvantages as an automotive resource. The “new” fuel had a lower octane rating than ethanol, was much more toxic (particularly when blended with tetra-ethyl lead and other compounds to enhance octane), generally more dangerous, and contained threatening air pollutants.

Petroleum was more likely to explode and burn accidentally, gum would form on storage surfaces and carbon deposits would form in combustion chambers of engines. Pipelines were needed for distribution from “area found” to “area needed”. Petroleum was much more physically and chemically diverse than ethanol, necessitating complex refining procedures to ensure the manufacture of a consistent “gasoline” product.

However, despite these environmental flaws, fuels made from petroleum have dominated automobile transportation for the past three-quarters of a century. There are two key reasons: First, cost per kilometer of travel has been virtually the sole selection criteria. Second, the large investments made by the oil and auto industries in physical capital, human skills and technology make the entry of a new cost-competitive industry difficult.

Until very recently, environmental concerns have been largely ignored. All of that is finally changing as consumers demand fuels such as ethanol, which are much better for the environment and human health. By Kae Davis. Source.

[ SOURCE ]



General Hemp Information

General Hemp Information, Uses, Facts

On an annual basis, 1 acre of hemp will produce as much fiber as 2 to 3 acres of cotton. Hemp fiber is stronger and softer than cotton, lasts twice as long as cotton, and will not mildew.

Cotton grows only in moderate climates and requires more water than hemp; but hemp is frost tolerant, requires only moderate amounts of water, and grows in all 50 states. Cotton requires large quantities of pesticides and herbicides–50% of the world’s pesticides/herbicides are used in the production of cotton. Hemp requires no pesticides, no herbicides, and only moderate amounts of fertilizer.

On an annual basis, 1 acre of hemp will produce as much paper as 2 to 4 acres of trees. From tissue paper to cardboard, all types of paper products can be produced from hemp.

The quality of hemp paper is superior to tree-based paper. Hemp paper will last hundreds of years without degrading, can be recycled many more times than tree-based paper, and requires less toxic chemicals in the manufacturing process than does paper made from trees.

Hemp can be used to produce fiberboard that is stronger and lighter than wood. Substituting hemp fiberboard for timber would further reduce the need to cut down our forests.

Hemp can be used to produce strong, durable and environmentally-friendly plastic substitutes. Thousands of products made from petroleum-based plastics can be produced from hemp-based composites.

It takes years for trees to grow until they can be harvested for paper or wood, but hemp is ready for harvesting only 120 days after it is planted. Hemp can grow on most land suitable for farming, while forests and tree farms require large tracts of land available in few locations. Harvesting hemp rather than trees would also eliminate erosion due to logging, thereby reducing topsoil loss and water pollution caused by soil runoff.

Hemp seeds contain a protein that is more nutritious and more economical to produce than soybean protein. Hemp seeds are not intoxicating. Hemp seed protein can be used to produce virtually any product made from soybean: tofu, veggie burgers, butter, cheese, salad oils, ice cream, milk, etc. Hemp seed can also be ground into a nutritious flour that can be used to produce baked goods such as pasta, cookies, and breads.

Hemp seed oil can be used to produce non-toxic diesel fuel, paint, varnish, detergent, ink and lubricating oil. Because hemp seeds account for up to half the weight of a mature hemp plant, hemp seed is a viable source for these products.

Just as corn can be converted into clean-burning ethanol fuel, so can hemp. Because hemp produces more biomass than any plant species (including corn) that can be grown in a wide range of climates and locations, hemp has great potential to become a major source of ethanol fuel.

Literally millions of wild hemp plants currently grow throughout the U.S. Wild hemp, like hemp grown for industrial use, has no drug properties because of its low THC content. U.S. marijuana laws prevent farmers from growing the same hemp plant that proliferates in nature by the millions.

From 1776 to 1937, hemp was a major American crop and textiles made from hemp were common. Yet, The American Textile Museum, The Smithsonian Institute, and most American history books contain no mention of hemp. The government’s War on Drugs has created an atmosphere of self censorship where speaking of hemp in a positive manner is considered politically incorrect or taboo.

United States Presidents George Washington and Thomas Jefferson grew hemp, used products made from hemp, and praised the hemp plant in some of their writings.

No other natural resource offers the potential of hemp. Cannabis Hemp is capable of producing significant quantities of paper, textiles, building materials, food, medicine, paint, detergent, varnish, oil, ink, and fuel. Unlike other crops, hemp can grow in most climates and on most farmland throughout the world with moderate water and fertilizer requirements, no pesticides, and no herbicides. Cannabis Hemp (also known as Indian Hemp) has enormous potential to become a major natural resource that can benefit both the economy and the environment.

- Uses

- Housing

70% of the Cannabis Plant total weight is made up of the ‘hurd’ or woody inner core. This part of the plant is THC free (i.e. Hemp) and is used in housing construction. The silica leached from the soil by the plant combined with unslaked lime forms a chemical bond similar to cement which is fire and water proof. Cannabis Homes

- Food

Hemp may be grown also for food (the seed) but in the UK at least (and probably in other EU countries) cultivation licenses are not available for this purpose. Within Defra (the UK’s Department for Environment, Food and Rural Affairs) hemp is treated as purely a non-food crop, despite the fact that seed can and does appear on the UK market as a perfectly legal food product.

- Nutrition

Both the complete protein and the oils contained in hempseeds (rich in lanolin and linolenic acids) are in ideal ratios for human nutrition.

- Fiber

Until its rediscovery in the late 1980s, the use of hemp for fiber production had declined sharply over the past decades, but hemp still occupied an important place amongst natural fibers as it is strong, durable and unaffected by water. The main uses of hemp fiber were inrope, sacking, carpet, nets and webbing. A hemp clothing industry was reborn in the West in 1988, and hemp is being used in increasing quantities in paper manufacturing. The cellulose content is about 70%.

- Harvesting the fiber

Hemp stem.

Smallholder plots are usually harvested by hand. The plants are cut at 2 to 3 cm above the soil and left on the ground to dry. Mechanical harvesting is now common, using specially adapted cutter-binders or simpler cutters.

The cut hemp is laid in swathes to dry for up to four days. This was traditionally followed by retting, either water retting whereby the bundled hemp floats in water or dew retting whereby the hemp remains on the ground and is affected by the moisture in dew moisture, and by moulds and bacterial action. Modern processes use steam and machinery to separate the fiber, a process known as thermo-mechanical pulping.

- Fuel

Fuel can be a by-product of hemp cultivation. One fuel would be biodiesel because of the oils in the seeds and stalk of the hemp, another would be biofuel from the fibrous stalks.

Cultivation

Millennia of selective breeding have resulted in varieties that look quite different. Also, breeding since circa 1930 has focused quite specifically on producing strains which would perform very poorly as sources of drug material. Hemp grown for fiber is planted closely, resulting in tall, slender plants with long fibers. Ideally, according to Defra in 2004 the herb should be harvested before it flowers. This early cropping is because fiber quality declines if flowering is allowed and, incidentally, this cropping also pre-empts the herb’s maturity as a potential source of drug material, even though the tetrahydrocannabinol (THC) content would still be very low with these strains of hemp.

The name Cannabis is the genus and was the name favored by the 19th century medical practitioners who helped to introduce the herb’s drug potential to modern English-speaking consciousness. Cannabis for non-drug purposes (especially ropes and textiles) was then already well known as hemp.

The name marijuana is Mexican (or Latin American) in origin and associated almost exclusively with the herb’s drug potential. That marijuana is now well known in English as a name for drug material is due largely to the efforts of US drug prohibitionists during the 1920s and 1930s. We can surmise that this name was highlighted because it helped to characterize the herbal drug as quite alien to English-speaking culture.

- Varieties

There are broadly three groups of Cannabis varieties being cultivated today:

Varieties primarily cultivated for their fiber, characterized by long stems and little branching, called industrial hemp

Varieties grown for seed from which hemp oil is extracted

Varieties grown for medicinal or recreational purposes.

A nominal if not legal distinction is often made between hemp, with concentrations of the psychoactive chemical THC far too low to be useful as a drug, and Cannabis used for medical, recreational, or spiritual purposes.

Historical cultivation

From the 1881 Household Cyclopedia:

The soils most suited to the culture of this plant are those of the deep, black, putrid vegetable kind, that are low, and rather inclined to moisture, and those of the deep mellow, loamy, or sandy descriptions. The quantity of produce is generally much greater on the former than on the latter; but it is said to be greatly inferior in quality. It may, however, be grown with success on lands of a less rich and fertile kind by proper care and attention in their culture and preparation.

In order to render the grounds proper for the reception of the crop, they should be reduced into a fine mellow state of mould, and be perfectly cleared from weeds, by repeated plowings. When it succeeds grain crops, the work is mostly accomplished by three plowings, and as many harrowings: the first being given immediately after the preceding crop is removed, the second early in the spring, and the last, or seed earth, just before the seed is to be put in. In the last plowing, well rotted manure, in the proportion of fifteen or twenty, or good compost, in the quantity of twenty-five or thirty-three horse-cart loads, should be turned into the land; as without this it is seldom that good crops can be produced. The surface of the ground being left perfectly flat, and as free from furrows as possible; as by these means the moisture is more effectually retained, and the growth of the plants more fully promoted.

It is of much importance in the cultivation of hemp crops that the seed is new, and of a good quality, which may in some measure be known by its feeling heavy in the hand, and being of a bright shining color.

The proportion of seed that is most commonly employed is from two to three bushels, according to the quality of the land; but, as the crops are greatly injured by the plants standing too closely together, two bushels, or two bushels and a half may be a more advantageous quantity.

As the hemp plant is extremely tender in its early growth, care should be taken not to put the seed into the ground at so early a period, as that it may be liable to be injured by the effects of frost; nor to protract the sowing to so late a season as that the quality of the produce may be effected. The best season, on the drier sorts of land in the southern districts, is as soon as possible after the frosts are over in April; and, on the same descriptions of soil, in the more northern ones, towards the close of the same month or early in the ensuing one.

The most general method of putting crops of this sort into the soil is the broadcast, the seed being dispersed over the surface of the land in as even a manner as possible, and afterwards covered in by means of a very light harrowing. In many cases, however, especially when the crops are to stand for seed, the drill method in rows, at small distances, might be had recourse to with advantage; as, in this way, the early growth of the plants would be more effectually promoted, and the land be kept in a more clean and perfect state of mould, which are circumstances of importance in such crops. In whatever method the seed is put in, care must constantly be taken to keep the birds from it for some time afterwards.

This sort of crop is frequently cultivated on the same piece of ground for a great number of years, without any other kind intervening; but, in such cases, manure must be applied with almost every crop, in pretty large proportions, to prevent the exhaustion that must otherwise take place. It may be sown after most sorts of grain crops, especially where the land possesses sufficient fertility, and is in a proper state of tillage.

Thick stands of fiber hemp compete well with weeds.

As hemp, from its tall growth and thick foliage, soon covers the surface of the land, and prevents the rising of weeds, little attention is necessary after the seed has been put into the ground, especially where the broadcast method of sowing is practiced; but, when put in by the drill machine, a hoeing or two may be had recourse to with advantage in the early growth of the crop.

In the culture of this plant, it is particularly necessary that the same piece of land grows both male and female, or what is sometimes denominated simple hemp. The latter kind contains the seed.

When the grain is ripe (which is known by its becoming of a whitish-yellow color, and a few of the leaves beginning to drop from the stems); this happens commonly about thirteen or fourteen weeks from the period of its being sown, according as the season may be dry or wet (the first sort being mostly ripe some weeks before the latter), the next operation is that of taking it from the ground; which is effected by pulling it up by the roots, in small parcels at a time, by the hand, taking care to shake off the mould well from them before the handfuls are laid down. In some districts, the whole crop is pulled together, without any distinction being made between the different kinds of hemp; while, in others, it is the practice to separate and pull them at different times, according to their ripeness. The latter is obviously the better practice; as by pulling a large proportion of the crop before it is in a proper state of maturity, the quantity of produce must not only be considerably lessened, but its quality greatly injured by being rendered less durable.

After being thus pulled, it is tied up in small parcels, or what are sometimes termed baits.

Where crops of this kind are intended for seeding, they should be suffered to stand till the seed becomes in a perfect state of maturity, which is easily known by the appearance of it on inspection. The stems are then pulled and bound up, as in the other case, the bundles being set up in the same manner as grain, until the seed becomes so dry and firm as to shed freely. It is then either immediately threshed out upon large cloths for the purpose in the field, or taken home to have the operation afterwards performed.

The hemp, as soon as pulled, is tied up in small bundles, frequently at both ends.

It is then conveyed to pits, or ponds of stagnant water, about six or eight feet in depth, such as have a clayey soil being in general preferred, and deposited in beds, according to their size, and depth, the small bundles being laid both in a straight direction and crosswise of each other, so as to bind perfectly together; the whole, being loaded with timber, or other materials, so as to keep the beds of hemp just below the surface of the water.

It is not usual to water more than four or five times in the same pit, till it has been filled with water. Where the ponds are not sufficiently large to contain the whole of the produce at once, it is the practice to pull the hemp only as it can be admitted into them, it being thought disadvantageous to leave the hemp upon the ground after being pulled. It is left in these pits four, five, or six days, or even more, according to the warmth of the season and the judgment of the operator, on his examining whether the hemp material readily separates from the reed or stem; and then taken up and conveyed to a pasture field which is clean and even, the bundles being loosened and spread out thinly, stem by stem, turning it every second or third day, especially in damp weather, to prevent its being injured by worms or other insects. It should remain in this situation for two, three, four, or more weeks, according to circumstances, and be then collected together when in a perfectly dry state, tied up into large bundles, and placed in some secure building until an opportunity is afforded for breaking it, in order to separate the hemp. By this means the process of grassing is not only shortened, but the more expensive ones of breaking, scutching, and bleaching the yarn, rendered less violent and troublesome.

After the hemp has been removed from the field it is in a state to be broken and swingled, operations that are mostly performed by common laborers, by means of machinery for the purpose, the produce being tied up in stones. The refuse collected in the latter process is denominated sheaves, and is in some districts employed for the purposes of fuel. After having undergone these different operations, it is ready for the purposes of the manufacturer.

- History

Hemp use dates back to the Stone Age, with hemp fiber imprints found in pottery shards in China over 10,000 years old.

- Major hemp producing countries

From the 1950s to the 1980s the Soviet Union was the world’s largest producer (3,000 km² in 1970). The main production areas were in Ukraine, the Kursk and Orel regions of Russia, and near the Polish border.

Other important producing countries were China, Hungary, the former Yugoslavia, Romania, Poland, France and Italy.

Canada, United Kingdom, and Germany all resumed commercial production in the 1990s. British production is mostly used as bedding for horses; other uses are under development. The largest outlet for German fiber is composite automotive panels. Companies in Canada, UK, USA and Germany among many others are processing hemp seed into a growing range of food products and cosmetics; many traditional growing countries still continue with textile grade fiber production.

- Future of hemp

In the last decade hemp has been widely promoted as a crop for the future. This is stimulated by new technologies which make hemp suitable for industrial paper manufacturing, use as a renewable energy source (biofuel), and the use of hemp derivatives as replacement for petrochemical products.

The increased demand for health food has stimulated the trade in shelled hemp seed. Hemp oil is increasingly being used in the manufacturing of bodycare products.

Jesse Ventura was a vocal proponent of hemp cultivation while governor of Minnesota, though agricultural policymakers within his administration felt that hemp cultivation could not compete economically with crops such as corn and soybeans.

- THC in hemp

Hemp contains delta-9-tetrahydrocannabinol (THC), which is the psychoactive ingredient found in hashish. THC is present in all hemp varieties to some extent. In varieties grown for use as a drug, where males are removed in order to prevent fertilization, THC levels can reach as high as 20-30% in the unfertilized females which are given ample room to flower.

In hemp varieties grown for seed or fiber use, the plants are grown very closely together and a very dense biomass product is obtained, rich in oil from the seeds and fiber from the stalks and low in THC content. EU regulations limit THC content to 0.3% in industrial hemp. In Canada, the THC limit is 1%.

On October 9, 2001, the US Drug Enforcement Administration (DEA) ruled that even traces of THC in products intended for food use would be illegal as of February 6, 2002. This Interpretive Rule would have ruled out the production or use of hempseed or hempseed oil in food use in the USA, but after the Hemp Industries Association (HIA) filed suit the rule was stayed by the Ninth Circuit Court of Appeals on March 7, 2002. On March 21, 2003, the DEA issued a nearly identical Final Rule which was also stayed by the Ninth Circuit Court of Appeals on April 16, 2003. On February 6, 2004 the Ninth Circuit Court of Appeals issued a unanimous decision in favor of the HIA in which Judge Betty Fletcher wrote, “[T]hey (DEA) cannot regulate naturally-occurring THC not contained within or derived from marijuana-i.e. non-psychoactive hemp is not included in Schedule I. The DEA has no authority to regulate drugs that are not scheduled, and it has not followed procedures required to schedule a substance. The DEA’s definition of “THC” contravenes the unambiguously expressed intent of Congress in the Controlled Substances Act (CSA) and cannot be upheld”. On September 28, 2004 the HIA claimed victory after DEA declined to appeal to the Supreme Court of the United States the ruling from the Ninth Circuit Court of Appeals protecting the sale of hemp-containing foods. Industrial hemp remains legal for import and sale in the U.S., but U.S. farmers still are not permitted to grow it.

The DEA’s strong opposition to a chemical widely thought to be less addictive or harmful than legal nicotine or alcohol leads some of its critics to charge ulterior motives such as protection of the synthetic-fiber, wood pulp, petrochemical, and pharmochemical industries. The position has been an occasional embarrassment to the US government, as when they ignored their own arguments and grew it large-scale in Kentucky and Wisconsin for World War II. Critics of the HIA, however, argue that the necessities of the war and the unavailability of adequate synthetic substitutes outweighed the social, health, and public safety risks of producing hemp. Today, they assert, those risks are substantial, according to many experts, because hemp resembles crude marihuana and there is no visual way to distinguish the two. This, alone, would make enforcement of the marihuana laws by federal and state authorities all but impossible if hemp were legalized. The critics of HIA often allege that it is the HIA that may have an ulterior motive in promoting hemp for economic reasons while really seeking to legalize marihuana for recreational use. They add that if the federal government were to authorize the production of industrial hemp, it would likely require registration of farmers, inspections and audits of farms, and a “strict liability” clause in the law to allow administrative seizure of all land parcels upon which any crude marihuana is grown or where hemp with a THC level above one percent is found. This would discourage farmers from trying to use hemp to circumvent the law’s prohibition of marihuana while still protecting the public’s right to produce industrial hemp — a compromise that would satisfy all but those with the aforementioned hidden agenda.

The presence of (some) THC in hemp varieties and the fear that THC could be extracted from industrial hemp for illegal purposes has hampered the development of hemp in many countries. Since the early 1990s, however, many countries, including Canada, Australia, the UK, The Netherlands and Germany, allow hemp plantings and commercial scale production. Plant breeders are working on the development of new varieties which are low in THC.

You might also find this Italian study informative and interesting, as well: Antibacterial Cannabinoids from Cannibus sativa.

[ SOURCE ]

Ford recognized the utility of the hemp plant. He constructed a car of resin stiffened hemp fiber, and even ran the car on ethanol made from hemp. Ford knew that hemp could produce vast economic resources if widely cultivated. -

Bio fuels fall into 2 categories. 1) BioDiesel (oil-based fuel for diesel engines) and 2) Ethenol (an alcohol for petrol engines). If you have a regular petrol engine, you can run 15% ethanol (E-15) right now, with no conversion. If you want to use 85% ethanol (E-85), you would need to have your engine converted or own a car that is a Flexible Fuel Vehicle (FFV).If you have a diesel (compression-ignition) engine, you can run biodiesel right now. Power stations can also be produced locally.

Both ethanol and biodiesel are made from renewable sources with the goal in mind to be more environmentally sound and to decrease the dependence on foreign oil.Despite the fuel source coming from bio mass, the choice of the bio mass and the means of the production of it will determine the environmental benefits.

These environmental factors include the preservation of the environment, emissions and fossil fuel usage involved in the means of production.

A new government study shows that the Department of Transport’s aim to increase the level of biofuel in fuel sold across Britain will result in millions of acres of forest being burned down and turned into plantations. The findings of the study showed that using palm oil instead of fossil fuel increase emissions by 31 per cent, failing to meet the European Commission standard of each litre of biofuel reducing emissions by 35 per cent.-Source

Ethanol can come from many sources, the primary substance that comprises it is a grain, usually corn, sometimes wheat, or barley,in the US right now, it’s mostly corn. Brazil has been using alcohol because their primary fermentation source is sugar cane, which thrives in their environment and produces sucrose, which, as a disaccharide, can be fermented natively by the yeast, without the need for amylase mashing. Unfortunately, vegetation rich in mono- and disaccharides do not grow well except in the extreme southern portion of the US–and those that do are used for sugar production, meaning that, for operations that do not require extensive imports from other countries, starch or cellulose driven mashes must be used. Cellulose-based mashes are not yet cost effective, as cellulase is still prohibitively expensive for use in mass production.

None of these means of production compare with the environmental and economic benefits of using hemp as the source.

The added cost of the extra drying needed for crops such as sugar cane, corn and Napier grasses make these high moisture plants an inefficient source for growing methanol. Hemp turns out to be the most cost-efficient and valuable of all the fuel crops. Hemp ethanol will only cost 50 cents per gallon. Planting only 6 percent of the continental United States with biomass crops such as hemp would supply all current domestic demands for oil and gas. Yet no there is legislation,carbon tax scheme, encouragement and endorsement from government bodies to educte and encourages this. WHY? We have a political and and educational crisis.

The Economics, History and Politics of Hemp Fuels is alarming to say the very least.

The advantages that any biofuels will deliver will be that they provide more BTU than it takes to plant, maintain harvest and process (Ethanol makes 90k BTU per gallon, and gasoline is about 120k.).The USDA and University of Nebraska studied biomass from cellulose feed stock and what they found should be encouraging. A cellulose feedstock (like industrial hemp) can produce 540% more energy than it consumes in it’s production.

When considering industrial hemp as the feed stock there are several advantages this weed provides over other feed stocks for biofuels. Hemp can be harvestede two to three times a season.It can be grown on marginal lands,along the edges in areas where either nothing is currently growing or useless weeds thrive anyway. High yeild plants with thousands of uses besides energy this can create jobs in industries that have been outsourced. A few by products can help spread the risk out and diversify the portfolio of comodities. When hemp is compared to corn for biofuels hemp wins hands down. Corn ethanol is inefficient as a fuel crop it produces only 25% more energy than it consumes to produce the ethanol fuels.

Facts cleary show that Industrial hemp is the number one biomass producer on earth, meaning an actual contender for an economically competitive, clean burning fuel. Hemp has four times the biomass and cellulose potential and eight times the methanol potential of its closest competing crop – corn. Burning coal and oil are the greatest sources of acid rain; biomass fuels burn clean and contain no sulphur and produce no ash during combustion.

The cycle of growing and burning biomass crops keeps the world’s carbon dioxide level at perfect equilibrium, which means that we are less likely to experience the global climactic changes (greenhouse effect) brought about by excess carbon dioxide and water vapors after burning fossil fuels. Think of all the economic opportunities that could be created by producing clean energy instead of endangering our health and safety with the last remains of an unsustainable and dirty source.

HEMP production for Bio fuels or any products is also a superior carbon reduction method regardless of climate science, the health benefits speak for themselves. As far as Carbon credits goes HEMP is also a superior tradable permit scheme

Biomass from food crops and their byproducts is used to make Biofuel. Bast fibre crops include such species as Flax, Kenaf, Sun Hemp and Industrial Hemp. The “hurd” is the inner woody core of the bast fibre plant’s stem. In general bast fibre crops produce the greatest amount of usable bio-mass, over the shortest period, for the least amount of water.Bast crops are a highly efficient mop crop and can use most types of waste or even brackish water.

Between 1.7 and 1.9 tonnes of carbon dioxide is absorbed from the atmosphere for each tonne of bast crop cellulose produced. Typically one can grow 10-14 tonnes of crop straw per hectare. Another 2-3 tonnes of cellulose mass is produced and stored in the root system. So each hectare of hemp could immediately sequester some 22 tonnes of greenhouse gases. Bast crops are able to sequester more carbon than trees in a short 150 day season cycle and yet leave arable land available for food and other crop production in the remainder of the year.

Harvest Picture courtesy of Ecolution® in Romania -Source

The health issues are far more reaching.

American, Australian and new Zealand residents living near coal-fired power stations are exposed to higher radiation does then those living near power plants that meet government regulations.-Source

The following is information extracted from a study done by Dr Mark Diesendorf, who teaches sustainable development at the Institute of Environmental Studies at the University of New South Wales.

Quote-Mark Diesendorf: Australia has the biggest per capita emissions of greenhouse gases in the world. Australia’s biggest single source of emissions is burning coal to generate electricity. Coal-burning also emits dangerous air pollutants, including oxides of sulphur and nitrogen, sulphuric and hydrochloric acid, boron, fluoride, particulate matter, mercury and even low-level radioactivity. In addition, coal is responsible for much water pollution, water consumption, land degradation, and occupational health and safety hazards.

It is claimed by some that existing renewable energy sources, such as wind, solar or biomass, are not capable of substituting for coal-fired power stations. Well this notion has been refuted by a set of scenario studies for a clean energy future for Australia and its States. The results of these studies indicate that combinations of efficient energy use, renewable energy, and as a transitional fuel, natural gas, are technologically feasible now. Furthermore, the clean energy mix may also be cheaper than continuing with coal, even without taking into account the huge environmental and health costs of coal.

A very important benefit of undertaking the transition to a clean energy future is that it will stimulate job growth and increased economic activity. For each unit of electricity generated, wind power creates two to three times the number of local jobs as coal, while bio-electricity generates 3.5 times, and most of its jobs are in rural areas where they’re needed. Mark Diesendorf Institute of Environmental Studies at the University of New South Wales -End quote

That was 3.5 times the jobs created by the alternative infrastructure then a coal power station station.

Despite these facts political circles fail to implement Industrial HEMP Energy Policies.

[ SOURCE ]

Show more