LUBRICATION ENGINEERING
Bali | 24 – 26 Juni 2015 | IDR 8.000.000 per participant
Bandung | 24 – 26 Juni 2015 | IDR 7.000.000 per participant
Yogyakarta | 24 – 26 Juni 2015 | IDR 6.500.000 per participant
Bali | 08 – 10 Juli 2015 | IDR 8.000.000 per participant
Bandung | 08 – 10 Juli 2015 | IDR 7.000.000 per participant
Yogyakarta | 08 – 10 Juli 2015 | IDR 6.500.000 per participant
Jadwal Training 2015 Selanjutnya …
DESCRIPTION LUBRICATION ENGINEERING
The Lubrication Fundamentals workshop is a comprehensive, highly practical and interactive two-day course. With a bewildering selection of thousands of lubricant types, base stocks, additive packages and viscosity grades to choose, how do you know which one is right for your machine. After attending this course and interacting with your fellow students and instructor, you will have the tools to and knowledge to understand the key properties of lubricants and how to select the right one for your applications. Modern lubrication programs have dramatically changed from the old methods that have been passed down through the generations. If you aren’t using the right lubricant at the right time, in the right place, in the right quantity you could in fact be doing more harm than good and losing the opportunity to save your firm thousands of dollars with an effective lubrication program.
OBJECTIVES LUBRICATION ENGINEERING
At the end of the training you will have developed the skills and ability to recognise and solve lubricant problems in a structured and confident manner.
TRAINING OUTLINES LUBRICATION ENGINEERING
1.Introduction & Background
Discuss briefly the composition of lubricants, crude oil derived lubricants and synthetic lubricants.
Tribology
The cause of friction, heat, the result of friction, what causes wear
The types of lubrication:
– fluid and hydro-dynamic lubrication
– boundary lubrication
The characteristics of the lubricant under different operating conditions e.g. material surfaces, temperature conditions, load and viscosity of the lubricant
Different types of lubricants for different applications
The Properties Of Lubricants
Viscosity
Flashpoint and Volatility
Oxidation and thermal stability
Demulsibility
Foaming and gas solubility
Corrosion prevention
Compatibility
Lubricating Oil Additives
Oxidation inhibitors
Rust and corrosion inhibitor
Pour point depressants
Viscosity inhibitor (VI) improvers
Anti-wear additives
Extreme pressure (EP) additives
Anti-foam additives
Detergents and dispersants additives
Demulsifiers and Emulsifiers
Tackiness additives
Types Of Lubricants Greases And Grease Lubrication
Grease characteristics
Lubrication grease classification
Choice of grease
Grease types and performance
Grease application and trouble-shooting
Roller bearing lubrication
Internal Combustion Lubricants
Petrol and diesel engines
The choice of lubricant by engine type
Lubricant classification
Plain bearing lubrication
Lubrication
Viscosity classifications
Automatic transmission fluid
Hydraulic Systems And Fluids
Hydraulic systems
Viscosity of the lubricant
Chemical stability
Fire resistance
Anti-wear
Anti-rust
Anti-foam
Miscellaneous Lubrication
Steam Turbine Pumps and Motor
Lubrication
Air Compressor Lubrication
Lubrication Systems Filtration
Contamination fundamentals
Contamination generation
Cleanliness control
Filter fundamentals
Filter performance and testing
Flashing
Conditions Assessment Of Rotating Machinery
Monitoring techniques
Vibration analysis
Oil analysis
12.Tribology Root Causes Of Failures
Fluid contamination control
Leakage stability
Fluid chemical stability
Temperature stability
Wear stability
Storage
Safety Issues
Shelf Life
Contamination Potential
INSTRUCTOR LUBRICATION ENGINEERING
Dr. Ir. Rini Dharmastiti, M.Sc. and team
TIME & VENUE LUBRICATION ENGINEERING
24-26 Juni 2015
8-10 Juli 2015
14-16 Juli 2015
27-29 Juli 2015
5-7 Agustus 2015
18-20 Agustus 2015
26-28 Agustus 2015
2-4 September 2015
9-11 September 2015
28-30 September 2015
12-14 Oktober 2015
20-22 Oktober 2015
26-28 Oktober 2015
11-13 November 2015
16-18 November 2015
25-27 November 2015
21-23 Desember 2015
Hotel Horison Ultima-Riss | Yogyakarta
TRAINING FEE LUBRICATION ENGINEERING
IDR 6.500.000 per participant (Non-Residential)
Minimal participants : 2 persons (Yogyakarta)
Yogyakarta : Ibis Styles Dagen, Ibis Malioboro, Horison Ultima-Riss, Harper Mangkubumi, 101 Hotel, Grand Tjokro, Novotel, Grand Aston, Phoenix Hotel | Kuota Min. Peserta: 2 orang
Bali : Ibis Styles Kuta, Ibis Dewi Sri, Ibis Bali Kuta, Ibis Circle Kuta, Harris Hotel | IDR. 8.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang
Bandung : De Batara, Amaris, Golden Flower Hotel | IDR. 7.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang
FACILITIES
Training Modul
Stationeries
Certificate
Backpack
Exclusive Polo shirt
Flashdisk containing materials
Training photo
2x coffee break and lunch
Transportation Service from airport to hotel / training venue (at least for 2 participants from the same company).
Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
INFORMATION OPTIONS
Judul Training (required)
Tanggal Training
Select a message type
(required)
PERSONAL DATA
Your Name (required)
Job Title (required)
Company (required)
Company Address
Email (valid email required)
Mobile Phone (required)
Office Phone (required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta (required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me
cforms contact form by delicious:days