Vendor: Sigma UK
Type: Manual Tile Cutter
Price: 335.88
Sigma Tile Cutter 3D 93cm
Cut Length: 93cm
Diagonal Cut: 65cm
Max Thickness: 20mm
Breaking Strength: 1050 Kg
Weight: 13.5 Kg
“For the most demanding users”. Broad tile support table. Double registration for regulation of cutting thickness. The swivelling measurement bar supporting the tile rotates through 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained.
A 45° a second measurement scale gives the length of the diagonal. Measurements are in centimetres, or inches on request. The rapid positioning button makes the main angles normally used immediately available. Easy to dismantle to ensure compact dimensions for easy transport.
DRAGGING CUTTING SYSTEM: of maximum speed and precision, with measurement conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles.
Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile.
Machine Instructions
Continue reading...