Best Student Project Ideas for Mechanical Engineering Students
1. Drop test analysis of industrial helmet used for Mining Industrial standards
2. Shape optimization of a two wheeler suspension for pipe type and rectangular cross sections
3. Design evaluation and optimization of a nozzle used in diesel engine
4. Design evaluation of medical wheel chair.
5. Design evaluation of a ceiling fan blade for Rolax company
6. CFD analysis of a blower outer casing.
7. Coupled field analysis of a chimney used in cement industry
8. Stress analysis of functionally graded discs under mechanical and thermal loads
9. Effect of tool feed rate in single point diamond turning of Aluminum 6061 alloy.
10. Composite material analysis of a driven shaft for variable speeds
11. Design, modeling and manufacturing of a heat treatment tray for 7mmdia and 30mm height nozzle.
12. Transient thermal analysis of a Diesel Engine Out let Bi metal valve for open and closed conditions.
13. Contact analysis of a cam and follower in two wheeler.
14. Design of connecting rod of internal combustion Engine by a Topology optimization approach.
15. Tool life performances, wear mechanisms and surface roughness characteristics when milling austenised and quenched bearing steel with ceramic and H.S.S cutting tool.
16. Stress analysis of overarm or ram used in milling machine
17. Design optimization of a two wheeler suspension frame by E-glass Epoxy and Aluminum MMC
18. Drop simulation and material optimization of USB flash drive
19. Mono Composite leaf Spring for light Weight Vehicle-Design
20. Influence of cutting parameters on thrust force and torque in drilling of Mild steel, Aluminum 7475 by using HSS drill bit
21. Influence of cutting parameters on thrust force and torque in milling of EN 26 and H.D.S
22. Tool life performances, wear mechanisms and surface roughness characteristics when turning austenised and quenched bearing steel with ceramics and HSS(M30)
23. Modeling and analysis of connecting rod of four stroke single cylinder engine for optimization of cost & material
24. Profile modification and Validation of spur gear to increase the tooth strength
25. Analysis of Effect of clearance between the blades in shearing operations.
26. Stress analysis and design failure rectification of a connecting rod by FEA
27. Design evaluation of a heavy vehicle chassis by using materials E- Glass Epoxy & S-2 Glass Epoxy.
28. Connecting Rod Optimization for Weight and Cost Reduction
29. Structural Analysis of milling bed due to cutting forces
30. Optimization of a material flow time for plastic component by design evaluation
31. Fatigue analysis of diesel engine connecting rod using metal aluminum matrix reinforced with boron carbide.
32. Structural Analysis of column used in shaping machine.
33. Design optimization of the 150cc engine valve by Ti MMC.
34. Non linear dynamic analysis of crankshaft used in two wheeler
35. Design and Material optimization of cam shaft in 150cc engine
36. Design & validation of 220cc oil cooled engine cylinder head by LM12, LM13, LM14.
37. Design and Analysis of cylinder and Cylinder head of 4-Stroke SI Engine for weight reduction.
38. Design validation and buckling analysis of the MAG wheel for straight and slant spokes
39. Analysis of spindle in milling machine
40. Stress analysis and reducing stress of connecting rod of Nissan SUNNY Engine by the Finite Element Method
41. Analysis of drilling bed due to torque and thrust
42. Design & load calculations for auditorium & duct design for central air conditioning
43. Design evaluation of a material handling crane channel assembly used in workshop
44. Impact analysis on a frameless chassis construction of mini bus for variable speeds
45. Design evaluation of a heavy vehicle chassis for composite materials IM 7 Fiber & 997 Epoxy for optimum load conditions
46. Design evaluation of a two wheeler suspension system for variable load conditions
47. Design and material optimization of two wheeler rocker arm
48. Design validation of 220cc oil cooled engine cylinder head
49. Analysis of column used in drilling machines subjected to axial forces
50. Optimization of high speed turning parameters of Super alloy Inconel 718 material using Taguchi technique
51. Parametric Design & Design validation of support Structure for 25ton Crane used in moulding industry
52. Fatigue analysis of crankshaft in two wheeler for the material nickel chromium steel.
53. Assembly analysis of a gear train of a gear box
54. Process and die design for square tube extrusion
55. Analysis of arbor holding the cutting tool in a milling machine
56. Non linear analysis of diesel engine connecting rod
57. Analysis of column due to cutting forces in milling machine
58. Thermo – Mechanical stresses in Twin – Roll Casting of Aluminum Alloys
59. Analysis of center lathe headstock side due to tangential force, feed force and thrust force
60. Analysis of spindle due to torque and thrust during drilling
61. Analysis of bed used in shaping machine
62. Non linear Structural analysis of two wheeler piston
63. Design evaluation of two wheeler piston using aluminum metal matrix composite (MMC)
64. Failure analysis on diesel engine connecting rod due to repeated stresses
65. Effect of Impacting on tier and MAG wheel of a two wheeler for the moderate speeds
66. Buckling analysis of crankshaft used in two wheeler for maximum load conditions
67. Assembly analysis of crank, connecting rod, piston
68. Design evaluation of a two wheeler out let valve for 180cc engine
69. Analysis of center lathe tailstock side due to tangential force, feed force and thrust force
70. Analysis of radial arm used in drilling machines
71. Transient and thermal analysis of an exhaust manifold
72. Fatigue analysis of a multi plate clutch
73. Mechanical analysis of deformation of tube drawing process
74. Analysis and part life estimation of a foot rest
75. Fatigue analysis of Diesel engine piston by using composite aluminum metal matrix composite. (MMC)
76. Analysis of centre lathe bed due to forces received through head stock, tail stock and saddle
77. Design and optimization of a punching machine fly wheel
78. Thermo – mechanical Coupled Simulation for Hot Continuous Rolling of Large – Diameter Mandrel Bar
79. Design evaluation of a four cylinder petrol engine crank shaft using materials manganese steel and Aluminum matrix reinforced with boron carbide
80. Design evaluation of a camshaft used in multi cylinder engine using materials forged steel and Aluminum alloy
81. Assembly analysis of a single plate clutch
82. Analysis of ram used in shaping machine due to friction forces
83. Strengthening car bumper in load bearing direction by using material Carbon fiber-reinforced polymer IM7
84. Buckling analysis of an inlet & outlet valve of a 800cc car
85. Design & analysis of support hinge for 25ton Crane
86. Design Evaluation of flywheel used in petrol engine car for variable torque load
87. Fatigue analysis of a roller bearing used in two wheeler wheel
88. Design and analysis of spur gear used in a reciprocating compressor
89. Impact test on motorcycle helmet for different angles of impact using FEA
90. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminum alloy
91. Implicit finite element study of non – steady effects in cold roll forming
92. Non-Linear Finite Element Method Simulation and Modeling of the Cold and Hot Rolling Processes
93. Design and analysis of multi layer pressure vessel
94. Deformation analysis of extrusion of billets determined by the conditions of lubrication
95. Mechanical analysis of dies used in closed die forging to reduce defects
96. Elasto Plastic Deformation Process of Cold Rolling
97. Aero Thermodynamic Analysis and Design of a Rolling Piston Engine
98. Design of a car air conditioning system based on an absorption refrigeration cycle using energy from exhaust gas of an internal combustion engine
99. Plate-Fin-And-Tube Condenser Performance and Design for
100. Air-Conditioner
101. Flexible Control of Single Link arm using Neural Fuzzy Neuro Fuzzy
102. Dynamic Analysis of Flexible Single link probotic arm Considering joint Stiffness
103. Fuzzy logic and Neural networks based control of single link flexible Manipulator
104. Kinematic analysis of a three degrees of freedom parallel Manipulator
105. Analysis for a planar two link flexible arm
a. CADCAM
106. Friction Stir welding of Dissimilar Materials Statistical Analysis of the welding Data.
107. Mechanical properties of friction stir butt welding Al7475 & 6061.
108. Effect of friction stir welding parameters speed on the transient temperature distribution in friction stir welding of Al 360& 7475.
109. Stress analysis of functionally graded discs under mechanical and thermal loads.
110. Impact of misalignments on root stresses of hypoid gear sets.
111. Parametric optimization of a 220cc oil cooled engine cylinder fins.
112. Finite Element analysis of the effect of motorcycle helmet material against impact velocity.
113. Composite material reinforcement of the leaf spring for the material Glass Carbon Composite.
114. Strengthening car bumper in load bearing direction by using materials Impact ABS Plastic and Carbon Fiber-Reinforced Polymer IM7.
115. Influence of cutting parameters on thrust force and torque in drilling of Aluminum, Cast Iron, EN28.
116. Tool life performances, wear mechanisms and surface roughness characteristics when turning austenised and quenched AISI 52100 Bearing Steel with Ceramics and CBN/TiC cutting tools.
117. Optimizing feed and radial forces in CNC machining of P-20 tool steel through Taguchi’s parameters design approach.
118. Optimization of high speed turning parameters of super alloy Inconel 718 material using Taguchi technique.
119. Helical shift mechanics of rubber V-belt variators and analysis.
120. Analysis of loader arm of pneumatic High speed Loader.
121. Blow mould tool design and Manufacturing process for 1ltr pet bottle.
122. Compensation of tool forces in small diameter solid carbide end mills.
123. Analytical investigation of rake contact and friction behavior in different metal cutting
124. Developments of a hot forging die life prediction model.
125. Analysis of warm forging process
126. Uncertainty quantification and dimension prediction in forging and cooling processes
127. Cutting strategies for forging die manufacturing on CNC milling machines
128. Friction analysis in cold forging
129. Wear analysis of hot forging dies
130. DESIGN RELATED PROJECTS LIST
131. Stress analysis of functionally graded discs under mechanical and thermal loads.
132. Impact of misalignments on root stresses of hypoid gear sets.
133. Parametric optimization of a 220cc oil cooled engine cylinder fins.
134. Finite Element analysis of the effect of motorcycle helmet material against impact velocity.
135. Composite material reinforcement of the leaf spring for the material Glass Carbon Composite.
136. Strengthening car bumper in load bearing direction by using materials Impact ABS Plastic and Carbon Fiber-Reinforced Polymer IM7.
137. Analysis of loader arm of pneumatic High speed Loader.
138. Effect of orientation angle of elliptical hole on residual stresses and expansion of plastic zone in thermoplastic composite plates under in-plane loading.
139. Vibration analysis of delaminated composite beams using analytical and FEM models.
140. Performance of orifice plate assemblies under non – standard conditions using CFD.
141. Failure analysis of serial pinned joints in composite materials.
142. Bridge truss optimization under moving load using continuous and discrete design variables in optimization methods.
143. Effect of tyre overload and inflation pressure on rolling loss (resistance) and fuel consumption of automobile and truck/bus tyres
144. Failure cause analysis of welded joints
145. Failure response of single bolted composite joints under various preload
146. Influences of multiple holes on thermal stresses in a thermoplastic composite disc
147. FABRICATION
148. Friction Stir welding of Dissimilar Materials Statistical Analysis of the welding Data.
149. Mechanical properties of friction stir butt welding Al7475 & 6061.
150. Effect of friction stir welding parameters speed on the transient temperature distribution in friction stir welding of Al 360& 7475.
151. Blow mould tool design and Manufacturing process for 1ltr pet bottle.
152. Injection Mould tool design and Mould flow analysis of Exhaust fan.
153. Injection Mould tool design, Manufacturing process, Estimation and Costing of L&T Power box.
154. Multi-Cavity hot runner mould tool design.
155. High Pressure Die Casting tool design for Piston Bore fins.
156. Die Design and analysis of lever component used in thermostat
157. Die design and analysis of progressive tool for coca cola bottle cap
158. Elasto Plastic Deformation Process of Cold Rolling
159. FEA analysis for optimization of resistance spot welding process
160. Optimization of welding parameters for MIG welding
161. M. Tech CFD PROJECTS 2013-14
162. CFD analysis of a air cooled condenser by the copper & aluminum material.
163. CFD analysis for transient turbocharger flows by varying flow rate.
164. CFD analysis of an ejector for cooling applications
165. optimizing flow rate of a carburetor by CFD analysis
166. CFD analysis of an opposed piston internal combustion engine
167. CFD prediction to optimize front end cooling module of a passenger vehicle
168. Computation fluid Dynamics Simulation of Spark Ignition Engine for Gaseous Fuels with Different Spark Time
169. Hydrofoil analysis using CFD
170. Manifold optimization of an internal combustion engine by using CFD analysis.
171. Performance improvement of an automobile radiator using CFD analysis.
172. AMS
173. Selection of a manufacturing process for customer requirement.
174. Optimizing the product development time by using advance manufacturing software’s.
175. Reducing wear and tear of the carbide tip cutters by controlling machining parameters
176. Reducing machining time by using modern manufacturing software’s.
177. Increasing surface finish quality by varying milling parameters for Die steel.
178. Reducing the wear tear of ceramic end mill tips of a milling cutter.
179. Improving surface finishing quality by using radius carbide tips.
180. Effect of a coolant on carbide tool life
181. Effect of tool feed rate in single point diamond turning of Aluminum 6061 alloy.
182. Optimization of high speed turning parameters of super alloy Inconel 718 material using Taguchi technique.
183. Analytical investigation of rake contact and friction behavior in different metal cutting.
184. Cutting strategies for forging die manufacturing on CNC milling machines.
185. Influence of cutting parameters on thrust force, torque and temperature in milling of E – Glass and Polyester composites.
186. REFRIGERATION AND AIR CONDITIONING PROJECTS LIST
187. Single-Phase heat transfer and pressure drop inside internally helical-grooved horizontal small-diameter tubes
188. Transient modeling of hybrid loop heat pipe systems with multiple evaporators
189. Optimizing an intercooled compressor for an ideal gas model
190. Natural convective heat transfer from a narrow vertical flat plate with a uniform surface heat flux and with different plate edge conditions
191. A unified approach to the analysis of unidirectional and bi-directional parallel flow heat exchangers
192. Turbine blade film cooling using PSP technique
193. Unsteady tip clearance flow in an isolated axial compressor rotor
194. Life cycle optimization of residential air conditioner replacement
195. Design of absorption refrigeration system driven by engine exhaust gas for vehicles
196. Improving the heat transfer rate of AC condenser by optimizing material.
197. Computer simulations of natural convection of single phase nanofluids in simple enclosures
198. Experimental investigation of the discharge valve dynamics in a reciprocating compressor for trans-critical CO2 refrigeration cycle.
199. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material.
200. Thermal-hydraulic analysis of a 600 mw supercritical cfb boiler with low mass flux.
201. Design of a car air conditioning system based on an absorption refrigeration cycle using energy from exhaust gas of an internal combustion engine
202. A compact dynamic model for household vapor compression refrigerated systems
203. Improving the heat transfer rate of AC evaporator by optimizing material
204. Unsteady tip clearance flow in an isolated axial compressor rotor
205. Stall characteristics and tip clearance effects in forward swept axial compressor rotors
206. Effects of axial non-uniform tip clearances on aerodynamic performance of a transonic axial compressor
207. Performance and internal flow of sirocco fan using contra-rotating rotors
208. Natural Convective Heat Transfer from Narrow Vertical Plates
209. Effect of Edge Conditions on Natural Convective Heat Transfer from Narrow Vertical Plates
210. Natural Convective Heat Transfer from Inclined Narrow Plates
211. Turbulent Natural Convective Heat Transfer from Narrow Plates
212. Natural Convective Heat Transfer from Two Adjacent Narrow Plates
213. Force-Fed Micro channels for High Flux Cooling Applications
The post Best Student Project Ideas for Mechanical Engineering Students appeared first on Thesis123.com.