Sun SPARC Enterprise M-class server has a new service processor.
XSCF> man intro
Intro Intro(1)
NAME
Intro – list the commands provided by the XSCF firmware
DESCRIPTION
This Intro page lists the user commands (exit(1), man(1),
and who(1)) and system administration commands (all the oth-
ers, beginning with addboard(8)) provided by the XSCF
firmware of the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 servers. Some XSCF commands
have the same name as their Oracle Solaris OS counterpart,
but function slightly differently. For details, refer to the
man page for each command.
The following commands are supported:
exit exit the XSCF shell
man display manual pages of specified
XSCF shell command
who display a list of the user accounts
who are logged in to the XSCF
addboard configure an eXtended System
Board(XSB) into the domain confi-
guration or assigns it to the domain
configuration
addcodactivation add a Capacity on Demand (COD)
hardware activation key (COD key) to
the COD database
addcodlicense add a Capacity on Demand (COD)
right-to-use (RTU) license key to
the COD license database
addfru add a Field Replaceable Unit (FRU)
XCP Last change: April 2013 1
Intro Intro(1)
adduser create an XSCF user account
applynetwork apply XSCF network information to
the XSCF
cfgdevice connect a CD-RW/DVD-RW and TAPE
drive unit to the port, disconnect
it from the port, or display the
status of the drive
clockboard set or display the clock control
unit used at system startup
console connect to a domain console
deleteboard disconnect an eXtended System Board
(XSB) from the domain configuration
deletecodactivation remove a Capacity on Demand (COD)
hardware activation key (COD key)
from the COD database
deletecodlicense remove a Capacity on Demand (COD)
right-to-use (RTU) license key from
the COD license database
deletefru delete a Field Replaceable Unit
(FRU)
deleteuser delete an XSCF user account
XCP Last change: April 2013 2
Intro Intro(1)
disableuser disable an XSCF user account
dumpconfig save system configuration informa-
tion to a file
enableuser enable an XSCF user account
flashupdate update the firmware
fmadm fault management configuration tool
fmdump view fault management logs
fmstat report fault management module
statistics
forcerebootxscf reset the XSCF forcibly
getflashimage download a firmware image file
ioxadm manage External I/O Expansion Units
and add-in cards that contain Energy
Storage Modules and are attached to
the host system
moveboard move an eXtended System Board (XSB)
from the current domain to another
nslookup refer to the DNS server for the host
XCP Last change: April 2013 3
Intro Intro(1)
password manage user passwords and expiration
settings
ping send the ICMP ECHO_REQUEST packets
to the network host or the network
device
poweroff turn off the power to the specified
domain
poweron turn on the power to the specified
domain
prtfru display FRUID data on the system and
External I/O Expansion Unit
rebootxscf reset the XSCF
replacefru replace a Field Replaceable Unit
(FRU)
reset reset the specified domain
resetdateoffset reset time of domains to match sys-
tem time
restoreconfig restore the system configuration
information previously saved by
dumpconfig
restoredefaults restore factory settings of the
server or XSCF unit
XCP Last change: April 2013 4
Intro Intro(1)
sendbreak send a break signal to the specified
domain
setad configure Active Directory
setaltitude set the altitude of the system or
whether or not the air filter
installed
setarchiving configure the log archiving func-
tionality
setaudit manage the system auditing func-
tionality
setautologout set the session timeout time of the
XSCF shell
setcod set up the Capacity on Demand (COD)
resources used for domains
setdate set the date and time of XSCF
setdcl set a domain component list (DCL)
setdomainmode set a domain mode
setdomparam forcibly rewrite OpenBoot PROM
environment variables
XCP Last change: April 2013 5
Intro Intro(1)
setdscp set the IP address assignments for
the Domain to Service Processor Com-
munications Protocol (DSCP)
setdualpowerfeed set dual power feed mode
setemailreport set up the email report configura-
tion data
sethostname set a host name and domain name for
an XSCF unit
sethttps start or stop the HTTPS service,
which is used in the XSCF network.
This command also performs
authentication-related settings
setldap configure the Service Processor as a
Lightweight Directory Access Proto-
col (LDAP) client
setldapssl configure LDAP/SSL
setlocale set the default locale of the XSCF
setlocator control the blinking of the CHECK
LED on the operator panel
setloginlockout enable or disable login lockout
feature
XCP Last change: April 2013 6
Intro Intro(1)
setlookup enable or disable the use of the
Lightweight Directory Access Proto-
col (LDAP) server for authentication
and privilege lookup
setnameserver set the domain name system (DNS)
servers and the DNS search paths
used in the XSCF network
setnetwork set or remove the network interface
that used in XSCF
setntp set the NTP servers used on the XSCF
network, the stratum value, the pre-
ferred server and the clock address
of the local clock of XSCF
setpacketfilters set the IP packet filtering rules to
be used in the XSCF network
setpasswordpolicy manage the system password policy
setpowerupdelay set the warm-up time of the system
and wait time before system startup
setprivileges assign user privileges
setroute set routing information for an XSCF
network interface
setshutdowndelay set the shutdown wait time at power
interruption of the uninterruptible
power supply (UPS)
XCP Last change: April 2013 7
Intro Intro(1)
setsmtp set up the Simple Mail Transfer Pro-
tocol (SMTP) settings
setsnmp manage the SNMP agent
setsnmpusm specify the SNMPv3 agent’s User-
based Security Model (USM) confi-
guration
setsnmpvacm modify the SNMPv3 agent’s View-based
Access Control Model (VACM) confi-
guration
setssh configure the settings for the
Secure Shell (SSH) service used in
the XSCF network
setsunmc start or stop the Sun Management
Center agent and make changes to its
configuration
settelnet start or stop the telnet service
used in the XSCF network
settimezone set the time zone and Daylight Sav-
ing Time of XSCF
setupfru set up device hardware
setupplatform set up platform specific settings
XCP Last change: April 2013 8
Intro Intro(1)
showad show Active Directory configuration
and messages
showaltitude display the altitude of the system
and whether the air filter installed
showarchiving display log archiving configuration
and status
showaudit display the current auditing system
state
showautologout display the session timeout time of
the XSCF shell
showboards display information on an eXtended
System Board (XSB)
showcod display Capacity on Demand (COD)
information
showcodactivation display the current Capacity on
Demand (COD) hardware activation
permits (COD permits) stored in the
COD database
showcodactivationhistoryshow Capacity on Demand (COD)
activation log
showcodlicense display the current Capacity on
Demand (COD) right-to-use (RTU)
licenses stored in the COD license
database
XCP Last change: April 2013 9
Intro Intro(1)
showcodusage display the current usage statistics
for Capacity on Demand (COD)
resources
showconsolepath display information on the domain
console that is currently connected
showdate show the date and time of XSCF
showdateoffset display differences between system
time and domain times
showdcl display the current domain component
list (DCL)
showdevices display current information on an
eXtended System Board (XSB)
showdomainmode display the domain mode
showdomainstatus display the current domain component
list (DCL)
showdscp display the IP addresses assigned to
the Domain to Service Processor Com-
munications Protocol (DSCP)
showdualpowerfeed display the current setting of dual
power feed mode
showemailreport display the email report configura-
tion data
XCP Last change: April 2013 10
Intro Intro(1)
showenvironment display the air flow volume, intake
air temperature and humidity, tem-
perature sensor, voltage sensor, fan
speed, and power consumption infor-
mation in the server
showfru display the hardware settings of
specified device
showhardconf display information about Field
Replaceable Units (FRUs) installed
in the system
showhostname display the current host name for
the XSCF unit
showhttps display the status of the HTTPS ser-
vice set for the XSCF network
showldap display the Lightweight Directory
Access Protocol (LDAP) configuration
for the Service Processor
showldapssl show LDAP/SSL configuration and mes-
sages
showlocale display the current setting for the
XSCF locale
showlocator display the state of the CHECK LED
on the operator panel
showloginlockout display the account lockout setting
XCP Last change: April 2013 11
Intro Intro(1)
showlogs display the specified log
showlookup display the configuration for
authentication and privileges lookup
showmonitorlog display the contents of monitoring
messages in real time
shownameserver display the registered domain name
system (DNS) servers and the DNS
search paths specified on the XSCF
network
shownetwork display information of network
interfaces for XSCF
shownotice display copyright and license infor-
mation for the copyright information
for eXtended System Control Facility
(XSCF) Control Package (XCP)
showntp display the NTP servers currently
set for the XSCF network
showpacketfilters show the IP packet filtering rules
that are set in the XSCF network
showpasswordpolicy display the current password set-
tings
showpowerupdelay display the current settings for the
warm-up time of the system and wait
time before system startup
XCP Last change: April 2013 12
Intro Intro(1)
showresult display the exit status of the most
recently executed command
showroute display routing information for an
XSCF network interface
showshutdowndelay show the shutdown wait time at power
interruption of the uninterruptible
power supply (UPS)
showsmtp display the Simple Mail Transfer
Protocol (SMTP) configuration infor-
mation
showsnmp display the configuration informa-
tion and current status of the SNMP
agent
showsnmpusm display the current User-based Secu-
rity Model (USM) information for the
SNMP agent
showsnmpvacm display the current View-based
Access Control Access (VACM) infor-
mation for the SNMP agent
showssh display the settings of the Secure
Shell (SSH) service that configured
for the XSCF network
showstatus display the degraded Field Replace-
able Units (FRUs)
XCP Last change: April 2013 13
Intro Intro(1)
showsunmc show setup information and status of
Sun Management Center agent
showtelnet display the current status of the
telnet service for the XSCF network
showtimezone display the XSCF time zone and Day-
light Saving Time information of
current settings
showuser display user account information
snapshot collect and transfer environment,
log, error, and FRUID data
switchscf switch the XSCF unit between the
active and standby states
testsb perform an initial diagnosis of the
specified physical system board
(PSB)
traceroute display the route packets take to
the specified network host or the
network device
unlockmaintenance forcibly release the locked status
of XSCF
version display firmware version
XCP Last change: April 2013 14
Intro Intro(1)
viewaudit display audit records
XCP Last change: April 2013 15
Displays the domain status for all domains
XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Running
02 Running
03 –
04 –
05 –
06 –
07 –
08 –
09 –
10 –
11 –
12 –
13 –
14 –
15 –
16 –
17 –
18 –
19 –
20 –
21 –
22 –
23 –
Connecting to domain 00. To exit, press #.
XSCF> console -d 00
Console contents may be logged.
Connect to DomainID 0?[y|n] :y
*******************************************************************************
* *
* Use of this system is restricted to authorized users. User activity is *
* monitored and recorded by system personnel. Anyone using this system *
* expressly consents to such monitoring and recording. BE ADVISED: if *
* possible criminal activity is detected, system records, along with certain *
* personal information, may be provided to law enforcement officials. *
* *
*******************************************************************************
solaris10 console login: exit from console.
Connecting to domain 01. To exit, press #.
XSCF> console -d 01
Console contents may be logged.
Connect to DomainID 1?[y|n] :y
*******************************************************************************
* *
* Use of this system is restricted to authorized users. User activity is *
* monitored and recorded by system personnel. Anyone using this system *
* expressly consents to such monitoring and recording. BE ADVISED: if *
* possible criminal activity is detected, system records, along with certain *
* personal information, may be provided to law enforcement officials. *
* *
*******************************************************************************
solaris11 console login: exit from console.
Type exit to exit XSCF
XSCF> exit
logout
Connection to 172.22.250.60 closed.
Filed under: Hardware, Solaris Tagged: console, showdomainstatus 
