Hello kernel hackers,
I am visually impaired and I depend on compiz' Enhanced Desktop Zoom
functionality.
As with the latest kernels 3.16[-rc5,6,7] it (compiz) no longer
behaves, it seems to be stuck or waiting for something to return.
(I suspect the decorator.)
I tried to strace it however that didn't work, because windows and
statusbar disappears. Only the backdrop picture remains.
During boot I get:
[ 0.677025] [drm:i915_gem_init] *ERROR* Failed to initialize GPU,
declaring it wedged
(Full dmesg, .config and lspci -vvv below)
I do use the compiler which caused some noise :over here last week:
gcc (Debian 4.9.1-4) 4.9.1
However I understood a workaround had been implemented.
Since I am not on the list and traffic is high I'd appreciate being
cc'ed if you need more information of any sort.
Thanks,
Luuk
Debian SID with debian music (DMO) packages and some old compiz
packages.
here's dmesg of 3.16.0:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-Luuk-00115-g19583ca (root@Uruburu2)
(gcc version 4.9.1 (Debian 4.9.1-4) ) #9 SMP PREEMPT Tue Aug 5 12:12:52
CEST 2014
[ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-Luuk-00115-g19583ca
root=UUID=35b6603d-4c82-4f62-a7de-15f05ce70a29 ro vga=789 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd9ffbff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd9ffc00-0x00000000dda53bff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dda53c00-0x00000000dda55bff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dda55c00-0x00000000dfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff]
usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 780 /0DFRFW, BIOS
A15 08/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0DDC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 0DE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0DDB00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: last_pfn = 0xdd9ff max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size
24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x020aa000, 0x020aafff] PGTABLE
[ 0.000000] BRK [0x020ab000, 0x020abfff] PGTABLE
[ 0.000000] BRK [0x020ac000, 0x020acfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x117e00000-0x117ffffff]
[ 0.000000] [mem 0x117e00000-0x117ffffff] page 2M
[ 0.000000] BRK [0x020ad000, 0x020adfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x114000000-0x117dfffff]
[ 0.000000] [mem 0x114000000-0x117dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x113ffffff]
[ 0.000000] [mem 0x100000000-0x113ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd9fefff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdd7fffff] page 2M
[ 0.000000] [mem 0xdd800000-0xdd9fefff] page 4k
[ 0.000000] RAMDISK: [mem 0x37922000-0x37c88fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000000FC7F2 00008C (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 0x00000000000FC922 0000F4 (v03 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Gpe0Block: 128/64 (20140424/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000FFEA3664 005035 (v01 DELL dt_ex
00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x00000000DD9FFC00 000040
[ 0.000000] ACPI: SSDT 0x00000000FFEA87BA 0000AC (v01 DELL st_ex
00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 0x00000000000FCA16 000092 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 0x00000000000FCAA8 000028 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 0x00000000000FCAD0 000096 (v32 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 0x00000000000FCB66 00003C (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 0x00000000000FCBA2 000038 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 0x00000000000FCDFE 000032 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR 0x00000000000FCE30 000108 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 0x00000000000FCBDA 000176 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 0x00000000DD9FFC40 00023B (v01 DpgPmm Cpu0Ist
00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000DDA00049 00023B (v01 DpgPmm Cpu1Ist
00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000DDA00452 000190 (v01 DpgPmm CpuPm
00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD ->
[ffff880113800000-ffff880116ffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x117ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xdd9fefff]
[ 0.000000] node 0: [mem 0x100000000-0x117ffffff]
[ 0.000000] On node 0 totalpages: 1005976
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12355 pages used for memmap
[ 0.000000] DMA32 zone: 903679 pages, LIFO batch:31
[ 0.000000] Normal zone: 1344 pages used for memmap
[ 0.000000] Normal zone: 98304 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at
0xde000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI
devices
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s80704
r8192 d21696 u1048576
[ 0.000000] pcpu-alloc: s80704 r8192 d21696 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 992200
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-Luuk-00115-g19583ca
root=UUID=35b6603d-4c82-4f62-a7de-15f05ce70a29 ro vga=789 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Memory: 3873404K/4023904K available (8496K kernel code,
984K rwdata, 2884K rodata, 952K init, 748K bss, 150500K reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3325.064 MHz processor
[ 0.001008] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6650.12 BogoMIPS (lpj=3325064)
[ 0.001010] pid_max: default: 32768 minimum: 301
[ 0.001018] ACPI: Core revision 20140424
[ 0.077827] ACPI: All ACPI Tables successfully acquired
[ 0.078021] Security Framework initialized
[ 0.078026] AppArmor: AppArmor disabled by boot time parameter
[ 0.078027] Yama: becoming mindful.
[ 0.078038] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.078040] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes)
[ 0.078258] Initializing cgroup subsys devices
[ 0.078263] Initializing cgroup subsys net_cls
[ 0.078267] Initializing cgroup subsys blkio
[ 0.078282] CPU: Physical Processor ID: 0
[ 0.078283] CPU: Processor Core ID: 0
[ 0.078284] mce: CPU supports 6 MCE banks
[ 0.078289] CPU0: Thermal monitoring enabled (TM2)
[ 0.078295] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.078295] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.078295] tlb_flushall_shift: -1
[ 0.078369] Freeing SMP alternatives memory: 32K (ffffffff81fe6000 -
ffffffff81fee000)
[ 0.078421] dmar: Host address width 36
[ 0.078422] dmar: DRHD base: 0x000000fedc2000 flags: 0x0
[ 0.078428] dmar: IOMMU 0: reg_base_addr fedc2000 ver 1:0 cap
c0000020630272 ecap 1000
[ 0.078429] dmar: DRHD base: 0x000000fedc3000 flags: 0x0
[ 0.078433] dmar: IOMMU 1: reg_base_addr fedc3000 ver 1:0 cap
c0000020630272 ecap 1000
[ 0.078434] dmar: DRHD base: 0x000000fedc4000 flags: 0x1
[ 0.078437] dmar: IOMMU 2: reg_base_addr fedc4000 ver 1:0 cap
c9008020630272 ecap 1000
[ 0.078438] dmar: RMRR base: 0x000000dda58000 end: 0x000000dda6ffff
[ 0.078440] dmar: RMRR base: 0x000000ddc00000 end: 0x000000dfffffff
[ 0.078883] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089001] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @
3.33GHz (fam: 06, model: 17, stepping: 0a)
[ 0.090000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events,
Intel PMU driver.
[ 0.090000] ... version: 2
[ 0.090000] ... bit width: 40
[ 0.090000] ... generic registers: 2
[ 0.090000] ... value mask: 000000ffffffffff
[ 0.090000] ... max period: 000000007fffffff
[ 0.090000] ... fixed-purpose events: 3
[ 0.090000] ... event mask: 0000000700000003
[ 0.097076] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.099102] x86: Booting SMP configuration:
[ 0.099105] .... node #0, CPUs: #1
[ 0.111028] x86: Booted up 1 node, 2 CPUs
[ 0.111031] smpboot: Total of 2 processors activated (13300.25
BogoMIPS)
[ 0.112072] devtmpfs: initialized
[ 0.112312] NET: Registered protocol family 16
[ 0.112411] cpuidle: using governor ladder
[ 0.112413] cpuidle: using governor menu
[ 0.112449] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.112451] ACPI: bus type PCI registered
[ 0.112493] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.112495] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820
[ 0.113035] PCI: Using configuration type 1 for base access
[ 0.113041] dmi type 0xB1 record - unknown flag
[ 0.116084] ACPI: Added _OSI(Module Device)
[ 0.116084] ACPI: Added _OSI(Processor Device)
[ 0.116084] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116084] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153974] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188433] ACPI: Interpreter enabled
[ 0.188437] ACPI: (supports S0 S5)
[ 0.188438] ACPI: Using IOAPIC for interrupt routing
[ 0.188546] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.356020] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.356027] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.356033] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling
ASPM
[ 0.375022] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain
0000 [bus 00-3f] only partially covers this bridge
[ 0.375369] PCI host bridge to bus 0000:00
[ 0.375372] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.375374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.375375] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.375377] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.375378] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000effff]
[ 0.375380] pci_bus 0000:00: root bus resource [mem
0x000f0000-0x000fffff]
[ 0.375381] pci_bus 0000:00: root bus resource [mem
0xfc000000-0xfec00000]
[ 0.375383] pci_bus 0000:00: root bus resource [mem
0xddb00000-0xf7ffffff]
[ 0.375384] pci_bus 0000:00: root bus resource [mem
0xff980000-0xff980fff]
[ 0.375386] pci_bus 0000:00: root bus resource [mem
0xff97c000-0xff97ffff]
[ 0.375387] pci_bus 0000:00: root bus resource [mem
0xff970000-0xff9707ff]
[ 0.375389] pci_bus 0000:00: root bus resource [mem
0xfed20000-0xfed9ffff]
[ 0.375390] pci_bus 0000:00: root bus resource [mem
0xfeda6000-0xfeda6fff]
[ 0.375392] pci_bus 0000:00: root bus resource [mem
0xfeda7000-0xfeda7fff]
[ 0.375399] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.375414] DMAR: Forcing write-buffer flush capability
[ 0.375414] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.375722] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
[ 0.375750] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.376299] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.376308] pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff
64bit]
[ 0.376313] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.376317] pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
[ 0.376629] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.376637] pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff
64bit]
[ 0.376963] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.376988] pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f
64bit]
[ 0.377076] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.377385] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.377408] pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
[ 0.377418] pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
[ 0.377428] pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
[ 0.377438] pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
[ 0.377448] pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
[ 0.377822] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.377845] pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
[ 0.377855] pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
[ 0.378270] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.378284] pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
[ 0.378291] pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
[ 0.378298] pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
[ 0.378347] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.378650] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.378684] pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
[ 0.379018] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.379052] pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
[ 0.379383] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.379417] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.379755] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.379772] pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
[ 0.379846] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.380152] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[ 0.380211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.380517] pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
[ 0.380576] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.380886] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.380920] pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
[ 0.381255] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.381289] pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
[ 0.381620] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.381654] pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
[ 0.381992] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.382011] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
[ 0.382085] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.382390] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.382730] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.383121] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[ 0.383135] pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
[ 0.383142] pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
[ 0.383148] pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
[ 0.383154] pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
[ 0.383160] pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
[ 0.383167] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
[ 0.383202] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383503] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[ 0.383516] pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff
64bit]
[ 0.383532] pci 0000:00:1f.3: reg 0x20: [io 0x0980-0x099f]
[ 0.383868] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.383871] pci 0000:00:01.0: bridge window [mem
0xf7900000-0xf79fffff]
[ 0.383914] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.383918] pci 0000:00:1c.0: bridge window [mem
0xf7800000-0xf78fffff]
[ 0.383963] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.383967] pci 0000:00:1c.1: bridge window [mem
0xf7700000-0xf77fffff]
[ 0.384031] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive
decode)
[ 0.384039] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.384040] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.384042] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.384044] pci 0000:00:1e.0: bridge window [mem
0x000c0000-0x000effff] (subtractive decode)
[ 0.384045] pci 0000:00:1e.0: bridge window [mem
0x000f0000-0x000fffff] (subtractive decode)
[ 0.384047] pci 0000:00:1e.0: bridge window [mem
0xfc000000-0xfec00000] (subtractive decode)
[ 0.384048] pci 0000:00:1e.0: bridge window [mem
0xddb00000-0xf7ffffff] (subtractive decode)
[ 0.384050] pci 0000:00:1e.0: bridge window [mem
0xff980000-0xff980fff] (subtractive decode)
[ 0.384051] pci 0000:00:1e.0: bridge window [mem
0xff97c000-0xff97ffff] (subtractive decode)
[ 0.384053] pci 0000:00:1e.0: bridge window [mem
0xff970000-0xff9707ff] (subtractive decode)
[ 0.384055] pci 0000:00:1e.0: bridge window [mem
0xfed20000-0xfed9ffff] (subtractive decode)
[ 0.384056] pci 0000:00:1e.0: bridge window [mem
0xfeda6000-0xfeda6fff] (subtractive decode)
[ 0.384058] pci 0000:00:1e.0: bridge window [mem
0xfeda7000-0xfeda7fff] (subtractive decode)
[ 0.384070] pci_bus 0000:00: on NUMA node 0
[ 0.408927] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11
12 15)
[ 0.409850] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11
12 15)
[ 0.410726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11
12 15)
[ 0.411589] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11
12 15)
[ 0.412484] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
12 15) *0, disabled.
[ 0.413349] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11
12 15)
[ 0.414218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11
12 15)
[ 0.415097] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11
12 15)
[ 0.415694] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.415732] vgaarb: device added: PCI:0000:00:02.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.415732] vgaarb: loaded
[ 0.415732] vgaarb: bridge control possible 0000:00:02.0
[ 0.415732] SCSI subsystem initialized
[ 0.415732] libata version 3.00 loaded.
[ 0.415732] ACPI: bus type USB registered
[ 0.415732] usbcore: registered new interface driver usbfs
[ 0.415732] usbcore: registered new interface driver hub
[ 0.415732] usbcore: registered new device driver usb
[ 0.415732] pps_core: LinuxPPS API ver. 1 registered
[ 0.415732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.415732] PTP clock support registered
[ 0.415732] wmi: Mapper loaded
[ 0.415732] Advanced Linux Sound Architecture Driver Initialized.
[ 0.415732] PCI: Using ACPI for IRQ routing
[ 0.416963] PCI: pci_cache_line_size set to 64 bytes
[ 0.417006] Expanded resource reserved due to conflict with PCI Bus
0000:00
[ 0.417007] Expanded resource reserved due to conflict with PCI Bus
0000:00
[ 0.417009] e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
[ 0.417010] e820: reserve RAM buffer [mem 0xdd9ffc00-0xdfffffff]
[ 0.417099] Bluetooth: Core ver 2.19
[ 0.417105] NET: Registered protocol family 31
[ 0.417106] Bluetooth: HCI device and connection manager initialized
[ 0.417108] Bluetooth: HCI socket layer initialized
[ 0.417110] Bluetooth: L2CAP socket layer initialized
[ 0.417116] Bluetooth: SCO socket layer initialized
[ 0.417170] cfg80211: Calling CRDA to update world regulatory domain
[ 0.417170] HPET: 8 timers in total, 2 timers will be used for
per-cpu timer
[ 0.417170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 0, 0, 0, 0
[ 0.417170] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.419012] hpet: hpet2 irq 40 for MSI
[ 0.419018] hpet: hpet3 irq 41 for MSI
[ 0.419020] Switched to clocksource hpet
[ 0.423759] FS-Cache: Loaded
[ 0.423785] pnp: PnP ACPI init
[ 0.423797] ACPI: bus type PNP registered
[ 0.426959] system 00:00: [io 0x0800-0x085f] could not be reserved
[ 0.426961] system 00:00: [io 0x0c00-0x0c7f] has been reserved
[ 0.426963] system 00:00: [io 0x0860-0x08ff] has been reserved
[ 0.426965] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.427193] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.440444] pnp 00:02: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.446822] pnp 00:03: Plug and Play ACPI device, IDs SMO1200 PNP0c31
(active)
[ 0.456555] pnp: PnP ACPI: found 4 devices
[ 0.456557] ACPI: bus type PNP unregistered
[ 0.463137] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to
[bus 02] add_size 1000
[ 0.463140] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.463146] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to
[bus 03] add_size 1000
[ 0.463148] pci 0000:00:1c.1: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.463156] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] get_res_add_size add_size 200000
[ 0.463158] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit
pref] get_res_add_size add_size 200000
[ 0.463160] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.463161] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.463170] pci 0000:00:1c.0: BAR 9: assigned [mem
0xfc000000-0xfc1fffff 64bit pref]
[ 0.463175] pci 0000:00:1c.1: BAR 9: assigned [mem
0xfc200000-0xfc3fffff 64bit pref]
[ 0.463177] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.463179] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.463181] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.463184] pci 0000:00:01.0: bridge window [mem
0xf7900000-0xf79fffff]
[ 0.463187] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.463189] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.463193] pci 0000:00:1c.0: bridge window [mem
0xf7800000-0xf78fffff]
[ 0.463196] pci 0000:00:1c.0: bridge window [mem
0xfc000000-0xfc1fffff 64bit pref]
[ 0.463200] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.463202] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.463206] pci 0000:00:1c.1: bridge window [mem
0xf7700000-0xf77fffff]
[ 0.463209] pci 0000:00:1c.1: bridge window [mem
0xfc200000-0xfc3fffff 64bit pref]
[ 0.463213] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.463221] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.463223] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.463225] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463226] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[ 0.463228] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.463229] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
[ 0.463230] pci_bus 0000:00: resource 10 [mem 0xddb00000-0xf7ffffff]
[ 0.463232] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
[ 0.463233] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
[ 0.463235] pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
[ 0.463236] pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
[ 0.463238] pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
[ 0.463239] pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
[ 0.463241] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.463242] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.463244] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.463245] pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff
64bit pref]
[ 0.463247] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.463248] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.463250] pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff
64bit pref]
[ 0.463252] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.463253] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.463255] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463256] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
[ 0.463257] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.463259] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
[ 0.463260] pci_bus 0000:04: resource 10 [mem 0xddb00000-0xf7ffffff]
[ 0.463262] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
[ 0.463263] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
[ 0.463265] pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
[ 0.463266] pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
[ 0.463268] pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
[ 0.463269] pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
[ 0.463298] NET: Registered protocol family 2
[ 0.463450] TCP established hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.463519] TCP bind hash table entries: 32768 (order: 7, 524288
bytes)
[ 0.463659] TCP: Hash tables configured (established 32768 bind
32768)
[ 0.463690] TCP: reno registered
[ 0.463692] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.463713] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.463771] NET: Registered protocol family 1
[ 0.463853] RPC: Registered named UNIX socket transport module.
[ 0.463855] RPC: Registered udp transport module.
[ 0.463856] RPC: Registered tcp transport module.
[ 0.463857] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.463865] pci 0000:00:02.0: Boot video device
[ 0.469170] PCI: CLS 64 bytes, default 64
[ 0.469212] Unpacking initramfs...
[ 0.521569] Freeing initrd memory: 3484K (ffff880037922000 -
ffff880037c89000)
[ 0.521622] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.521624] software IO TLB [mem 0xd99ff000-0xdd9ff000] (64MB) mapped
at [ffff8800d99ff000-ffff8800dd9fefff]
[ 0.521665] Simple Boot Flag at 0x7a set to 0x80
[ 0.521926] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.521954] audit: initializing netlink subsys (disabled)
[ 0.521967] audit: type=2000 audit(1407234314.520:1): initialized
[ 0.522189] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.522442] FS-Cache: Netfs 'nfs' registered for caching
[ 0.522502] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.522547] ntfs: driver 2.1.30 [Flags: R/W].
[ 0.522607] msgmni has been set to 7572
[ 0.523307] alg: No test for stdrng (krng)
[ 0.523329] bounce: pool size: 64 pages
[ 0.523341] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 250)
[ 0.523384] io scheduler noop registered
[ 0.523410] io scheduler cfq registered (default)
[ 0.523836] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.524217] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
[ 0.524601] pcieport 0000:00:1c.1: irq 44 for MSI/MSI-X
[ 0.524721] simple-framebuffer simple-framebuffer.0: framebuffer at
0xe0000000, 0x1d5000 bytes, mapped to 0xffffc90004100000
[ 0.524723] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8,
mode=800x600x32, linelength=3200
[ 0.525671] Console: switching to colour frame buffer device 100x37
[ 0.526533] simple-framebuffer simple-framebuffer.0: fb0: simplefb
registered!
[ 0.526545] intel_idle: does not run on family 6 model 23
[ 0.526593] input: Power Button
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.526598] ACPI: Power Button [VBTN]
[ 0.526648] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.526650] ACPI: Power Button [PWRF]
[ 0.528518] Monitor-Mwait will be used to enter C-1 state
[ 0.530410] GHES: HEST is not enabled!
[ 0.530459] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.550958] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.571766] 0000:00:03.3: ttyS1 at I/O 0xecb8 (irq = 17, base_baud =
115200) is a 16550A
[ 0.572084] Linux agpgart interface v0.103
[ 0.572147] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 0.572160] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 0.573333] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.573423] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xe0000000
[ 0.574547] tpm_tis 00:03: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.610037] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
[ 0.610065] [drm] Initialized drm 1.1.0 20060810
[ 0.610655] [drm] Memory usable by graphics device = 2048M
[ 0.610656] [drm] Replacing VGA console driver
[ 0.610659] checking generic (e0000000 1d5000) vs hw (e0000000
10000000)
[ 0.610661] fb: switching to inteldrmfb from simple
[ 0.610674] Console: switching to colour dummy device 80x25
[ 0.623045] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 0.623054] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 0.623055] [drm] Driver supports precise vblank timestamp query.
[ 0.624082] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.677018] [drm:init_ring_common] *ERROR* render ring initialization
failed ctl 0001f001 (valid? 1) head 00000298 tail 00000000 start
001d8000 [expected 001d8000]
[ 0.677025] [drm:i915_gem_init] *ERROR* Failed to initialize GPU,
declaring it wedged
[ 0.747335] fbcon: inteldrmfb (fb0) is primary device
[ 0.774833] Console: switching to colour frame buffer device 240x67
[ 0.778593] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.778594] i915 0000:00:02.0: registered panic notifier
[ 0.781061] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 0.781792] loop: module loaded
[ 0.781889] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082f conflicts with OpRegion
0x0000000000000828-0x000000000000082d (\GLBC) (20140424/utaddress-258)
[ 0.781892] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082f conflicts with OpRegion
0x000000000000082a-0x000000000000082a (\SACT) (20140424/utaddress-258)
[ 0.781895] ACPI Warning: SystemIO range
0x0000000000000828-0x000000000000082f conflicts with OpRegion
0x0000000000000828-0x0000000000000828 (\SSTS) (20140424/utaddress-258)
[ 0.781898] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 0.781900] ACPI Warning: SystemIO range
0x00000000000008b0-0x00000000000008bf conflicts with OpRegion
0x00000000000008b8-0x00000000000008bb (\GIC2) (20140424/utaddress-258)
[ 0.781903] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 0.781904] ACPI Warning: SystemIO range
0x0000000000000880-0x00000000000008af conflicts with OpRegion
0x000000000000088c-0x000000000000088f (\GIC1) (20140424/utaddress-258)
[ 0.781907] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 0.781922] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.781972] ahci 0000:00:1f.2: version 3.0
[ 0.782322] ahci 0000:00:1f.2: controller can't do SNTF, turning off
CAP_SNTF
[ 0.782338] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.782379] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x23 impl RAID mode
[ 0.782382] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems sxs
[ 0.786566] scsi0 : ahci
[ 0.786665] scsi1 : ahci
[ 0.786754] scsi2 : ahci
[ 0.786841] scsi3 : ahci
[ 0.786928] scsi4 : ahci
[ 0.787014] scsi5 : ahci
[ 0.787054] ata1: SATA max UDMA/133 abar m2048@0xff970000 port
0xff970100 irq 46
[ 0.787056] ata2: SATA max UDMA/133 abar m2048@0xff970000 port
0xff970180 irq 46
[ 0.787057] ata3: DUMMY
[ 0.787058] ata4: DUMMY
[ 0.787059] ata5: DUMMY
[ 0.787061] ata6: SATA max UDMA/133 abar m2048@0xff970000 port
0xff970380 irq 46
[ 0.787715] scsi6 : ata_generic
[ 0.787788] scsi7 : ata_generic
[ 0.787823] ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma
0xfef0 irq 18
[ 0.787824] ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma
0xfef8 irq 18
[ 0.787885] Rounding down aligned max_sectors from 4294967295 to
4294967288
[ 0.787916] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.787917] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.788298] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 0.788309] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 0.982320] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
b8:ac:6f:9d:d8:dd
[ 0.982323] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 0.982353] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No:
2011FF-0FF
[ 0.982375] usbcore: registered new interface driver rtl8187
[ 0.982386] usbcore: registered new interface driver rt2800usb
[ 0.982387] I2O subsystem v1.325
[ 0.982388] i2o: max drivers = 8
[ 0.982446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.982448] ehci-pci: EHCI PCI platform driver
[ 0.982801] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.982806] ehci-pci 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 0.982817] ehci-pci 0000:00:1a.7: debug port 1
[ 0.986702] ehci-pci 0000:00:1a.7: cache line size of 64 is not
supported
[ 0.986713] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
[ 0.992017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.992056] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 0.992059] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.992062] usb usb1: Product: EHCI Host Controller
[ 0.992064] usb usb1: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
ehci_hcd
[ 0.992067] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.992208] hub 1-0:1.0: USB hub found
[ 0.992214] hub 1-0:1.0: 6 ports detected
[ 0.992677] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.992682] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 0.992692] ehci-pci 0000:00:1d.7: debug port 1
[ 0.996589] ehci-pci 0000:00:1d.7: cache line size of 64 is not
supported
[ 0.996600] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
[ 1.002028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.002079] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.002082] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.002085] usb usb2: Product: EHCI Host Controller
[ 1.002088] usb usb2: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
ehci_hcd
[ 1.002090] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.002213] hub 2-0:1.0: USB hub found
[ 1.002218] hub 2-0:1.0: 6 ports detected
[ 1.002343] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.002686] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.002690] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.002717] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 1.002750] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.002752] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.002753] usb usb3: Product: UHCI Host Controller
[ 1.002755] usb usb3: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.002756] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.002835] hub 3-0:1.0: USB hub found
[ 1.002841] hub 3-0:1.0: 2 ports detected
[ 1.003253] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.003258] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.003284] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 1.003315] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.003317] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.003319] usb usb4: Product: UHCI Host Controller
[ 1.003320] usb usb4: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.003322] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.003405] hub 4-0:1.0: USB hub found
[ 1.003410] hub 4-0:1.0: 2 ports detected
[ 1.003812] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.003817] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.003836] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[ 1.003868] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.003869] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.003871] usb usb5: Product: UHCI Host Controller
[ 1.003872] usb usb5: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.003874] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.003957] hub 5-0:1.0: USB hub found
[ 1.003962] hub 5-0:1.0: 2 ports detected
[ 1.004371] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.004376] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.004394] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 1.004426] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.004427] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.004429] usb usb6: Product: UHCI Host Controller
[ 1.004430] usb usb6: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.004432] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.004506] hub 6-0:1.0: USB hub found
[ 1.004512] hub 6-0:1.0: 2 ports detected
[ 1.004917] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.004921] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.004939] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 1.004971] usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.004973] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.004974] usb usb7: Product: UHCI Host Controller
[ 1.004976] usb usb7: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.004977] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.005059] hub 7-0:1.0: USB hub found
[ 1.005064] hub 7-0:1.0: 2 ports detected
[ 1.005465] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.005469] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.005488] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.005520] usb usb8: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.005522] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.005523] usb usb8: Product: UHCI Host Controller
[ 1.005525] usb usb8: Manufacturer: Linux 3.16.0-Luuk-00115-g19583ca
uhci_hcd
[ 1.005526] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.005609] hub 8-0:1.0: USB hub found
[ 1.005613] hub 8-0:1.0: 2 ports detected
[ 1.005703] usbcore: registered new interface driver usblp
[ 1.005713] usbcore: registered new interface driver uas
[ 1.005738] usbcore: registered new interface driver usb-storage
[ 1.005759] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 1.008605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.008631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.008742] mousedev: PS/2 mouse device common for all mice
[ 1.008916] input: PC Speaker
as /devices/platform/pcspkr/input/input3
[ 1.008968] rtc_cmos 00:01: RTC can wake from S4
[ 1.009077] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.009097] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram,
hpet irqs
[ 1.009104] i2c /dev entries driver
[ 1.009697] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 1.009819] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.009831] iTCO_wdt: Found a ICH10DO TCO device (Version=2,
TCOBASE=0x0860)
[ 1.009919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.009926] iTCO_vendor_support: vendor-support=0
[ 1.010330] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 1.010342] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.010364] usbcore: registered new interface driver usbhid
[ 1.010365] usbhid: USB HID core driver
[ 1.010425] input: Dell WMI hotkeys as /devices/virtual/input/input4
[ 1.010558] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.010560] AMD IOMMUv2 functionality not available on this system
[ 1.010694] usbcore: registered new interface driver snd-usb-audio
[ 1.010734] TCP: cubic registered
[ 1.010756] NET: Registered protocol family 10
[ 1.010932] mip6: Mobile IPv6
[ 1.010935] NET: Registered protocol family 17
[ 1.010939] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.010940] Bluetooth: BNEP filters: protocol multicast
[ 1.010942] Bluetooth: BNEP socket layer initialized
[ 1.010957] mpls_gso: MPLS GSO support
[ 1.011526] rtc_cmos 00:01: setting system clock to 2014-08-05
10:25:15 UTC (1407234315)
[ 1.011760] ALSA device list:
[ 1.011761] No soundcards found.
[ 1.092027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.092042] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.092059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.094647] ata1.00: ATA-7: SAMSUNG SSD PM800 TH 64GB, VBM24D1Q, max
UDMA/100
[ 1.094650] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.095787] ata1.00: configured for UDMA/100
[ 1.095897] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM80
4D1Q PQ: 0 ANSI: 5
[ 1.096073] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks:
(64.0 GB/59.6 GiB)
[ 1.096083] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.096112] sd 0:0:0:0: [sda] Write Protect is off
[ 1.096114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.096135] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.096585] sda: sda1 sda2 < sda5 >
[ 1.096885] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.104813] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max
UDMA/100
[ 1.118617] ata2.00: configured for UDMA/100
[ 1.120350] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S
FX20 PQ: 0 ANSI: 5
[ 1.147732] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 1.147735] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.147878] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.147939] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.310956] Freeing unused kernel memory: 952K (ffffffff81ef8000 -
ffffffff81fe6000)
[ 1.310957] Write protecting the kernel read-only data: 14336k
[ 1.314208] Freeing unused kernel memory: 1732K (ffff88000184f000 -
ffff880001a00000)
[ 1.316346] Freeing unused kernel memory: 1212K (ffff880001cd1000 -
ffff880001e00000)
[ 1.324101] systemd-udevd[112]: starting version 208
[ 1.324334] random: systemd-udevd urandom read with 22 bits of
entropy available
[ 1.345026] usb 1-2: new high-speed USB device number 3 using
ehci-pci
[ 1.409005] ehci-pci 0000:00:1a.7: port 2 reset error -110
[ 1.524019] tsc: Refined TSC clocksource calibration: 3324.979 MHz
[ 2.481419] kjournald starting. Commit interval 5 seconds
[ 2.481444] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.526018] Switched to clocksource tsc
[ 2.573918] systemd[1]: systemd 208 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.574400] systemd[1]: Set hostname to <Uruburu2>.
[ 2.717579] systemd[1]: Starting Syslog Socket.
[ 2.717606] systemd[1]: Listening on Syslog Socket.
[ 2.717614] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 2.717654] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 2.717661] systemd[1]: Starting Remote File Systems (Pre).
[ 2.717668] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.717675] systemd[1]: Starting /dev/initctl Compatibility Named
Pipe.
[ 2.717690] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 2.717696] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.717710] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.717720] systemd[1]: Starting Dispatch Password Requests to
Console Directory Watch.
[ 2.717743] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 2.717751] systemd[1]: Starting Journal Socket.
[ 2.717780] systemd[1]: Listening on Journal Socket.
[ 2.717790] systemd[1]: Starting Syslog.
[ 2.717797] systemd[1]: Reached target Syslog.
[ 2.717813] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.718229] systemd[1]: Starting Journal Service...
[ 2.718528] systemd[1]: Started Journal Service.
[ 2.789793] systemd-udevd[195]: starting version 208
[ 2.826033] usb 2-6: new high-speed USB device number 3 using
ehci-pci
[ 2.936380] EXT3-fs (sda1): using internal journal
[ 2.957541] usb 2-6: New USB device found, idVendor=07d1,
idProduct=3c0a
[ 2.957544] usb 2-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.957546] usb 2-6: Product: 11n Adapter
[ 2.957548] usb 2-6: Manufacturer: Ralink
[ 2.957549] usb 2-6: SerialNumber: 1.0
[ 2.970948] systemd-journald[171]: Received request to flush runtime
journal from PID 1
[ 2.988902] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0c
[ 2.990129] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0c
[ 2.990183] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.009897] random: nonblocking pool is initialized
[ 3.061024] usb 2-6: reset high-speed USB device number 3 using
ehci-pci
[ 3.156808] Adding 2579452k swap on /dev/sda5. Priority:-1 extents:1
across:2579452k SS
[ 3.186144] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071,
rev 021c detected
[ 3.237891] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008
detected
[ 3.238246] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 3.444053] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.608746] usb 3-1: New USB device found, idVendor=046d,
idProduct=c50e
[ 3.608749] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.608751] usb 3-1: Product: USB RECEIVER
[ 3.608752] usb 3-1: Manufacturer: Logitech
[ 3.630222] input: Logitech USB RECEIVER
as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:046D:C50E.0001/input/input7
[ 3.630356] hid-generic 0003:046D:C50E.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.0-1/input0
[ 3.733165] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 3.834049] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 3.834155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.837026] usb 3-2: new full-speed USB device number 3 using
uhci_hcd
[ 3.964749] usb 3-2: not running at top speed; connect to a high
speed hub
[ 4.000751] usb 3-2: New USB device found, idVendor=041e,
idProduct=3f02
[ 4.000754] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.000756] usb 3-2: Product: E-MU 0202 | USB
[ 4.000758] usb 3-2: Manufacturer: E-MU Systems, Inc.
[ 4.000759] usb 3-2: SerialNumber:
E-MU-9E-3F02-07DA051C-0E1AA-8740T2A
[ 4.584322] ieee80211 phy0: rt2x00lib_request_firmware: Info -
Loading firmware file 'rt2870.bin'
[ 4.598386] ieee80211 phy0: rt2x00lib_request_firmware: Info -
Firmware detected - version: 0.29
[ 4.642033] usb 7-2: new full-speed USB device number 2 using
uhci_hcd
[ 4.801052] usb 7-2: New USB device found, idVendor=413c,
idProduct=1003
[ 4.801056] usb 7-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.801059] usb 7-2: Product: Dell USB Keyboard Hub
[ 4.801062] usb 7-2: Manufacturer: Dell
[ 4.806076] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.809076] hub 7-2:1.0: USB hub found
[ 4.810064] hub 7-2:1.0: 3 ports detected
[ 5.085057] usb 7-2.1: new full-speed USB device number 3 using
uhci_hcd
[ 5.209054] usb 7-2.1: New USB device found, idVendor=413c,
idProduct=2010
[ 5.209058] usb 7-2.1: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 5.209061] usb 7-2.1: Product: Dell USB Keyboard
[ 5.209064] usb 7-2.1: Manufacturer: Dell
[ 5.219444] input: Dell Dell USB Keyboard
as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2.1/7-2.1:1.0/0003:413C:2010.0002/input/input8
[ 5.219517] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID
v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2.1/input0
[ 5.226120] input: Dell Dell USB Keyboard
as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2.1/7-2.1:1.1/0003:413C:2010.0003/input/input9
[ 5.226239] hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID
v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2.1/input1
[ 6.868810] cfg80211: Calling CRDA to update world regulatory domain
[ 6.872469] cfg80211: World regulatory domain updated:
[ 6.872472] cfg80211: DFS Master region: unset
[ 6.872473] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.872475] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.872476] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.872478] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.872479] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.872481] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.872482] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 8.366502] wlan0: authenticate with 00:0c:f6:a0:12:40
[ 8.399436] wlan0: send auth to 00:0c:f6:a0:12:40 (try 1/3)
[ 8.400818] wlan0: authenticated
[ 8.400907] rt2800usb 2-6:1.0 wlan0: disabling HT/VHT due to WEP/TKIP
use
[ 8.401257] wlan0: associate with 00:0c:f6:a0:12:40 (try 1/3)
[ 8.403691] wlan0: RX AssocResp from 00:0c:f6:a0:12:40 (capab=0xc31
status=0 aid=1)
[ 8.410442] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.410519] wlan0: associated
Here's .config of that kernel:
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.16.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi
-fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9
-fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-Luuk"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
# CONFIG_RCU_NOCB_CPU_ZERO is not set
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE i