Greetings,
I got the below dmesg and the first bad commit is
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
commit c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de
Author: Fabian Frederick <fabf@skynet.be>
AuthorDate: Sat Mar 22 12:49:51 2014 +1100
Commit: Stephen Rothwell <sfr@canb.auug.org.au>
CommitDate: Mon Mar 24 17:32:07 2014 +1100
ufs: sb mutex merge + mutex_destroy
788257d6101d9 ("ufs: remove the BKL") replaced BKL with mutex protection
using functions lock_ufs, unlock_ufs and struct mutex 'mutex' in sb_info.
b6963327e052 ("ufs: drop lock/unlock super") removed lock/unlock super and
added struct mutex 's_lock' in sb_info.
Those 2 mutexes are generally locked/unlocked at the same time except in
allocation (balloc, ialloc).
This patch merges the 2 mutexes and propagates first commit solution. It
also adds mutex destruction before kfree during ufs_fill_super failure and
ufs_put_super.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+-----------------------------------------------------------------+------------+---------------+
| | c7d2e322dd | next-20140324 |
+-----------------------------------------------------------------+------------+---------------+
| boot_successes | 31 | 4 |
| boot_failures | 26 | 15 |
| WARNING:CPU:PID:at_kernel/locking/mutex-debug.c:mutex_destroy() | 26 | 15 |
| INFO:rcu_preempt_detected_stalls_on_CPUs/tasks | 25 | 15 |
| INFO:task_blocked_for_more_than_seconds | 26 | 15 |
| RIP:flat_send_IPI_mask | 26 | 15 |
| Kernel_panic-not_syncing:hung_task:blocked_tasks | 26 | 15 |
| backtrace:do_mount | 26 | 15 |
| backtrace:SyS_mount | 26 | 15 |
| backtrace:user_path_create | 25 | 15 |
| backtrace:SyS_mknodat | 25 | 15 |
| backtrace:SyS_mknod | 25 | 15 |
| backtrace:watchdog | 26 | 15 |
| backtrace:work_fn | 1 | |
+-----------------------------------------------------------------+------------+---------------+
[ 7.661278] UFSD (fs/ufs/super.c, 1264): ufs_fill_super:
[ 7.664618] ufs was compiled with read-only support, can't be mounted as read-write
[ 7.667790] UFSD (fs/ufs/super.c, 1264): ufs_fill_super:
[ 7.670703] WARNING: CPU: 0 PID: 483 at kernel/locking/mutex-debug.c:117 mutex_destroy+0x4c/0x65()
[ 7.674108] ufs was compiled with read-only support, can't be mounted as read-write
[ 7.676652] flag 0
[ 7.677363] ufs was compiled with read-only support, can't be mounted as read-write
git bisect start 098bc161bfc7697f7e2ca15400f13ca1ac60e9dd 9b28ec4b41883a83c3b0960e61739162443c5bba --
git bisect bad 46a1de3d4918d4210affec733d665fd0ff2391e3 # 20:06 15- 4 Merge branch 'akpm/master'
git bisect good c51fabb1e3b203382616ca21f7cf4e7b0912d50e # 20:20 57+ 1 Revert "vmstat: use raw_cpu_ops to avoid false positives on preemption checks"
git bisect good bc82fcdfe572cea8d21ad97f1fab2d8cf3d412bc # 20:45 57+ 0 net: replace __this_cpu_inc in route.c with raw_cpu_inc
git bisect good 855370bf10fd8eb8877e197b6cbcd0262a9b34b7 # 21:04 57+ 0 arm64: initialize pgprot info earlier in boot
git bisect good a5a8c89e515b8617f232d1a3375a086c4bfcae24 # 21:28 57+ 0 fs/ufs: remove unused ufs_super_block_second pointer
git bisect bad c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de # 21:48 22- 5 ufs: sb mutex merge + mutex_destroy
git bisect good e68aadb9f813be874722b4ef1e84b32557688364 # 22:11 57+ 0 fs/ufs: remove unused ufs_super_block_third pointer
# first bad commit: [c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de] ufs: sb mutex merge + mutex_destroy
git bisect good e68aadb9f813be874722b4ef1e84b32557688364 # 22:21 171+ 0 fs/ufs: remove unused ufs_super_block_third pointer
git bisect bad 098bc161bfc7697f7e2ca15400f13ca1ac60e9dd # 22:21 0- 15 Add linux-next specific files for 20140324
git bisect good b098d6726bbfb94c06d6e1097466187afddae61f # 23:12 171+ 2 Linux 3.14-rc8
git bisect bad 2ec6ab7445b659589abf5b9cf6c087c420d439bd # 23:22 50- 1 Add linux-next specific files for 20140325
This script may reproduce the error.
-----------------------------------------------------------------------------
#!/bin/bash
kernel=$1
initrd=yocto-minimal-x86_64.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/blob/master/initrd/$initrd
kvm=(
qemu-system-x86_64 -cpu kvm64 -enable-kvm
-kernel $kernel
-initrd $initrd
-smp 2
-m 256M
-net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio
-net user,vlan=0
-net nic,vlan=1,model=e1000
-net user,vlan=1
-boot order=nc
-no-reboot
-watchdog i6300esb
-serial stdio
-display none
-monitor null
)
append=(
debug
sched_debug
apic=debug
ignore_loglevel
sysrq_always_enabled
panic=10
prompt_ramdisk=0
earlyprintk=ttyS0,115200
console=ttyS0,115200
console=tty0
vga=normal
root=/dev/ram0
rw
)
"${kvm[@]}" --append "${append[*]}"
-----------------------------------------------------------------------------
Thanks,
Fengguang
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Linux version 3.14.0-rc7-11620-gc7d2e32 (kbuild@inn) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 PREEMPT Tue Mar 25 21:43:34 CST 2014
[ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-r3-03251014/next:master:c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de:bisect-linux5/.vmlinuz-c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de-20140325214349-34-ivytown2 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-r3-03251014/c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de/vmlinuz-3.14.0-rc7-11620-gc7d2e32 drbd.minor_count=8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02704000, 0x02704fff] PGTABLE
[ 0.000000] BRK [0x02705000, 0x02705fff] PGTABLE
[ 0.000000] BRK [0x02706000, 0x02706fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13bfffff]
[ 0.000000] [mem 0x13a00000-0x13bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x139fffff]
[ 0.000000] [mem 0x10000000-0x139fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[ 0.000000] [mem 0x13c00000-0x13dfffff] page 2M
[ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k
[ 0.000000] BRK [0x02707000, 0x02707fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x13ce6000-0x13feffff]
[ 0.000000] ACPI: RSDP 0x00000000000FD950 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000013FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000013FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000013FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0x0000000013FFFF40 000040
[ 0.000000] ACPI: SSDT 0x0000000013FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x0000000013FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000013FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880012e00000-ffff8800133fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1216 pages used for memmap
[ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 2261840
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 80519
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-r3-03251014/next:master:c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de:bisect-linux5/.vmlinuz-c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de-20140325214349-34-ivytown2 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-r3-03251014/c7d2e322dd6eac1e3b44d2ea13f9818ad0f903de/vmlinuz-3.14.0-rc7-11620-gc7d2e32 drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 293496K/327280K available (13903K kernel code, 1928K rwdata, 4680K rodata, 1660K init, 1372K bss, 33784K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.000000] double unlock:failed|failed|failed| ok |failed|failed|
[ 0.000000] initialize held:failed|failed|failed|failed|failed|failed|
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | |failed|
[ 0.000000] recursive read-lock #2: | ok | |failed|
[ 0.000000] mixed read-write-lock: |failed| |failed|
[ 0.000000] mixed write-read-lock: |failed| |failed|
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.000000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing:failed| ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked:failed|
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context:failed| ok | ok |
[ 0.000000] try:failed| ok |failed|
[ 0.000000] block:failed| ok |failed|
[ 0.000000] spinlock:failed| ok |failed|
[ 0.000000] --------------------------------------------------------
[ 0.000000] 153 out of 253 testcases failed, as expected. |
[ 0.000000] ----------------------------------------------------
[ 0.000000] ODEBUG: 11 of 11 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2493.976 MHz processor
[ 0.003000] Calibrating delay loop (skipped) preset value.. 4987.95 BogoMIPS (lpj=2493976)
[ 0.003481] pid_max: default: 4096 minimum: 301
[ 0.004017] ACPI: Core revision 20140214
[ 0.006595] ACPI: All ACPI Tables successfully acquired
[ 0.007109] Security Framework initialized
[ 0.008009] AppArmor: AppArmor disabled by boot time parameter
[ 0.009023] Mount-cache hash table entries: 256
[ 0.011825] mce: CPU supports 10 MCE banks
[ 0.012065] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.012065] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.012065] tlb_flushall_shift: 6
[ 0.013039] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.043075] ftrace: allocating 49408 entries in 194 pages
[ 0.063115] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.066432] Getting VERSION: 50014
[ 0.067011] Getting VERSION: 50014
[ 0.068006] Getting ID: 0
[ 0.068635] Getting ID: ff000000
[ 0.069012] Getting LVT0: 8700
[ 0.070046] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.071014] Getting LVT1: 8400
[ 0.072032] enabled ExtINT on CPU#0
[ 0.075037] ENABLING IO-APIC IRQs
[ 0.075841] init IO_APIC IRQs
[ 0.076006] apic 0 pin 0 not connected
[ 0.077011] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.078029] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.079036] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.080028] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.081025] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.082027] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.083026] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.084026] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.085026] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.086057] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.087026] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.088062] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.089025] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.090027] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.091025] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.092061] apic 0 pin 16 not connected
[ 0.093004] apic 0 pin 17 not connected
[ 0.094004] apic 0 pin 18 not connected
[ 0.095004] apic 0 pin 19 not connected
[ 0.096004] apic 0 pin 20 not connected
[ 0.097004] apic 0 pin 21 not connected
[ 0.098004] apic 0 pin 22 not connected
[ 0.099004] apic 0 pin 23 not connected
[ 0.100207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.101004] Using local APIC timer interrupts.
[ 0.101004] calibrating APIC timer ...
[ 0.103000] ... lapic delta = 6249860
[ 0.103000] ... PM-Timer delta = 358141
[ 0.103000] ... PM-Timer result ok
[ 0.103000] ..... delta 6249860
[ 0.103000] ..... mult: 268429443
[ 0.103000] ..... calibration result: 999977
[ 0.103000] ..... CPU clock speed is 2494.0153 MHz.
[ 0.103000] ..... host bus clock speed is 999.0977 MHz.
[ 0.106003] xor: measuring software checksum speed
[ 0.117007] prefetch64-sse: 6864.000 MB/sec
[ 0.128008] generic_sse: 6376.000 MB/sec
[ 0.129005] xor: using function: prefetch64-sse (6864.000 MB/sec)
[ 0.130010] prandom: seed boundary self test passed
[ 0.132210] prandom: 100 self tests passed
[ 0.133006] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.134142] regulator-dummy: no parameters
[ 0.135150] NET: Registered protocol family 16
[ 0.137818] cpuidle: using governor menu
[ 0.139321] ACPI: bus type PCI registered
[ 0.140149] PCI: Using configuration type 1 for base access
[ 0.170026] raid6: sse2x1 2726 MB/s
[ 0.188010] raid6: sse2x2 4074 MB/s
[ 0.206015] raid6: sse2x4 4710 MB/s
[ 0.207004] raid6: using algorithm sse2x4 (4710 MB/s)
[ 0.208004] raid6: using intx1 recovery algorithm
[ 0.209107] ACPI: Added _OSI(Module Device)
[ 0.210004] ACPI: Added _OSI(Processor Device)
[ 0.211004] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216970] ACPI: Interpreter enabled
[ 0.217010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.220007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.223020] ACPI: (supports S0 S3 S5)
[ 0.224004] ACPI: Using IOAPIC for interrupt routing
[ 0.226018] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.232630] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233011] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.234013] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.235266] PCI host bridge to bus 0000:00
[ 0.236007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.237006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.238006] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.239006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.240006] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.242005] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.243805] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.245922] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.251007] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 0.254045] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.255037] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.256005] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.257005] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.259005] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.260753] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.261020] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.263075] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.266188] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.269057] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.281060] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.283974] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.286007] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 0.289011] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.297804] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.298579] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[ 0.300550] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[ 0.307604] pci_bus 0000:00: on NUMA node 0
[ 0.308775] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.310292] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.312782] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.314277] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.316661] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.318000] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.319411] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.320005] vgaarb: loaded
[ 0.321004] vgaarb: bridge control possible 0000:00:02.0
[ 0.323234] SCSI subsystem initialized
[ 0.324109] libata version 3.00 loaded.
[ 0.325142] ACPI: bus type USB registered
[ 0.326082] usbcore: registered new interface driver usbfs
[ 0.327035] usbcore: registered new interface driver hub
[ 0.328073] usbcore: registered new device driver usb
[ 0.330190] Linux video capture interface: v2.00
[ 0.331040] pps_core: LinuxPPS API ver. 1 registered
[ 0.332017] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.333025] PTP clock support registered
[ 0.334578] Advanced Linux Sound Architecture Driver Initialized.
[ 0.335040] PCI: Using ACPI for IRQ routing
[ 0.336016] PCI: pci_cache_line_size set to 64 bytes
[ 0.337192] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.338017] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[ 0.339508] NET: Registered protocol family 8
[ 0.340004] NET: Registered protocol family 20
[ 0.344108] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.345095] cfg80211: Calling CRDA to update world regulatory domain
[ 0.346066] Switched to clocksource kvm-clock
[ 0.347658] Could not create debugfs 'set_ftrace_filter' entry
[ 0.349554] Could not create debugfs 'set_ftrace_notrace' entry
[ 0.368148] pnp: PnP ACPI init
[ 0.369272] ACPI: bus type PNP registered
[ 0.370837] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.373629] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.376029] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.379000] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.381292] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.384214] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.386486] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.389303] pnp 00:03: [dma 2]
[ 0.390429] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.392894] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.395745] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.398202] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.401186] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.403874] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.406306] pnp: PnP ACPI: found 7 devices
[ 0.407857] ACPI: bus type PNP unregistered
[ 0.414625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.416511] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.418488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420613] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.422811] NET: Registered protocol family 1
[ 0.424298] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.426287] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.428303] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.430436] pci 0000:00:02.0: Boot video device
[ 0.432127] PCI: CLS 0 bytes, default 64
[ 0.433925] Unpacking initramfs...
[ 0.550594] Freeing initrd memory: 3112K (ffff880013ce6000 - ffff880013ff0000)
[ 0.554867] Machine check injector initialized
[ 0.556807] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[ 0.560133] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[ 0.563540] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[ 0.567665] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable.
[ 0.570209] PCLMULQDQ-NI instructions are not detected.
[ 0.572245] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 0.574716] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 0.577068] AVX or AES-NI instructions are not detected.
[ 0.579183] AVX instructions are not detected.
[ 0.580798] AVX instructions are not detected.
[ 0.582400] AVX instructions are not detected.
[ 0.584162] AVX instructions are not detected.
[ 0.585768] AVX2 instructions are not detected.
[ 0.588125] Initializing RT-Tester: OK
[ 0.589526] spin_lock-torture:--- Start of test: nwriters_stress=2 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[ 0.595140] spin_lock-torture: Creating torture_shuffle task
[ 0.597103] spin_lock-torture: Creating torture_stutter task
[ 0.599364] spin_lock-torture: torture_shuffle task started
[ 0.601503] spin_lock-torture: Creating lock_torture_writer task
[ 0.603733] spin_lock-torture: torture_stutter task started
[ 0.605907] spin_lock-torture: Creating lock_torture_writer task
[ 0.608069] spin_lock-torture: lock_torture_writer task started
[ 0.610324] spin_lock-torture: Creating lock_torture_stats task
[ 0.612553] spin_lock-torture: lock_torture_writer task started
[ 0.615190] futex hash table entries: 16 (order: -4, 384 bytes)
[ 0.617361] spin_lock-torture: lock_torture_stats task started
[ 0.619526] Initialise system trusted keyring
[ 0.621128] audit: initializing netlink subsys (disabled)
[ 0.623165] audit: type=2000 audit(1395755164.108:1): initialized
[ 0.625941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.631613] VFS: Disk quotas dquot_6.5.2
[ 0.633073] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.636471] ntfs: driver 2.1.30 [Flags: R/W].
[ 0.638321] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.640032] QNX4 filesystem 0.2.3 registered.
[ 0.641848] fuse init (API version 7.22)
[ 0.643514] befs: version: 0.9.3
[ 0.645106] ocfs2 stack glue: unable to register sysctl
[ 0.646974] ocfs2: Registered cluster interface o2cb
[ 0.649025] OCFS2 User DLM kernel interface loaded
[ 0.652763] gfs2: GFS2 installed
[ 0.654287] msgmni has been set to 579
[ 0.658042] NET: Registered protocol family 38
[ 0.659835] Key type asymmetric registered
[ 0.661354] Asymmetric key parser 'x509' registered
[ 0.663278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.666070] io scheduler noop registered
[ 0.667476] io scheduler deadline registered (default)
[ 0.669366] test_string_helpers: Running tests...
[ 0.671241] rbtree testing -> 19315 cycles
[ 1.503857] augmented rbtree testing
[ 1.618508] tsc: Refined TSC clocksource calibration: 2492.754 MHz
[ 2.391292] -> 22103 cycles
[ 2.450243] vmlfb: initializing
[ 2.451286] Could not find Carillo Ranch MCH device.
[ 2.452900] no IO addresses supplied
[ 2.454109] hgafb: HGA card not detected.
[ 2.455652] hgafb: probe of hgafb.0 failed with error -22
[ 2.457513] usbcore: registered new interface driver udlfb
[ 2.460560] uvesafb: VGABIOS Cirrus extension, VGABIOS Cirrus extension, 1.0, OEM: VGABIOS Cirrus extension, VBE v2.0
[ 2.466145] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 2.468624] uvesafb: VBE state buffer size cannot be determined (eax=0x14f, err=0)
[ 2.470871] uvesafb: scrolling: redraw
[ 2.472564] uvesafb: framebuffer at 0xfc000000, mapped to 0xffffc90000080000, using 4096k, total 4096k
[ 2.475430] fb0: VESA VGA frame buffer device
[ 2.481589] ipmi message handler version 39.2
[ 2.482913] ipmi device interface
[ 2.483950] IPMI System Interface driver.
[ 2.485228] ipmi_si: Adding default-specified kcs state machine
[ 2.487103] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 2.490000] ipmi_si: Interface detection failed
[ 2.491419] ipmi_si: Adding default-specified smic state machine
[ 2.493278] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 2.496246] ipmi_si: Interface detection failed
[ 2.497590] ipmi_si: Adding default-specified bt state machine
[ 2.499530] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 2.502602] ipmi_si: Interface detection failed
[ 2.504000] ipmi_si: Unable to find any System Interface(s)
[ 2.505848] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.508007] ACPI: Power Button [PWRF]
[ 2.523063] HDLC line discipline maxframe=4096
[ 2.524470] N_HDLC line discipline registered.
[ 2.525935] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 2.527527] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.557611] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.561008] SuperH (H)SCI(F) driver initialized
[ 2.562804] STMicroelectronics ASC driver initialized
[ 2.564633] serial: Freescale lpuart driver
[ 2.566159] Cyclades driver 2.6
[ 2.567326] MOXA Intellio family driver version 6.0k
[ 2.569114] Initializing Nozomi driver 2.1d
[ 2.570631] RocketPort device driver module, version 2.09, 12-June-2003
[ 2.572967] No rocketport ports found; unloading driver
[ 2.574691] SyncLink GT
[ 2.575677] SyncLink GT, tty major#243
[ 2.576981] SyncLink GT no devices found
[ 2.578350] SyncLink MultiPort driver $Revision: 4.38 $
[ 2.584625] SyncLink MultiPort driver $Revision: 4.38 $, tty major#242
[ 2.586852] Non-volatile memory driver v1.3
[ 2.588460] ppdev: user-space parallel port driver
[ 2.590047] smapi::smapi_init, ERROR invalid usSmapiID
[ 2.591778] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 2.594829] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 2.597165] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 2.599467] Linux agpgart interface v0.103
[ 2.602601] parport_pc 00:04: reported by Plug and Play ACPI
[ 2.604460] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[ 2.607231] HP CISS Driver (v 3.6.26)
[ 2.608864] Floppy drive(s): fd0 is 1.44M
[ 2.610998] nbd: registered device at major 43
[ 2.614991] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 2.617091] dummy-irq: no IRQ given. Use irq=N
[ 2.618788] lkdtm: No crash points registered, enable through debugfs
[ 2.620970] Phantom Linux Driver, version n0.9.8, init OK
[ 2.622837] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 2.625204] c2port c2port0: C2 port uc added
[ 2.626706] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[ 2.629516] mic_init not running on X100 ret -19
[ 2.631190] usbcore: registered new interface driver rtsx_usb
[ 2.633897] FDC 0 is a S82078B
[ 2.635796] usbcore: registered new interface driver viperboard
[ 2.637853] Uniform Multi-Platform E-IDE driver
[ 2.639693] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 2.642085] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 2.645454] ide0: BM-DMA at 0xc040-0xc047
[ 2.647234] ide1: BM-DMA at 0xc048-0xc04f
[ 2.649078] Probing IDE interface ide0...
[ 3.173347] Probing IDE interface ide1...
[ 3.846393] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 4.459366] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 4.460762] hdc: MWDMA2 mode selected
[ 4.461793] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.462816] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.464116] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 4.467368] ide-gd driver 1.18
[ 4.468448] ide-cd driver 5.00
[ 4.470013] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache
[ 4.472104] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.480063] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 4.483800] osst :I: Tape driver with OnStream support version 0.99.4
[ 4.483800] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 4.493741] SCSI Media Changer driver v0.25
[ 4.495433] Error: Driver 'pata_platform' is already registered, aborting...
[ 4.500566] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 4.503907] vcan: Virtual CAN interface driver
[ 4.507383] slcan: serial line CAN interface driver
[ 4.509964] slcan: 10 dynamic interface channels.
[ 4.513133] CAN device driver interface
[ 4.514474] usbcore: registered new interface driver ems_usb
[ 4.517557] usbcore: registered new interface driver esd_usb2
[ 4.521425] usbcore: registered new interface driver peak_usb
[ 4.523255] sja1000 CAN netdevice driver
[ 4.524653] cc770: CAN netdevice driver
[ 4.525825] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 4.527440] AX.25: 6pack driver, Revision: 0.3.0
[ 4.528931] YAM driver version 0.8 by F1OAT/F6FBB
[ 4.531132] AX.25: bpqether driver version 004
[ 4.532620] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 4.532620] baycom_ser_fdx: version 0.10
[ 4.537659] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 4.539380] hdlcdrv: version 0.8
[ 4.540483] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 4.540483] baycom_ser_hdx: version 0.10
[ 4.544118] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 4.544118] baycom_par: version 0.9
[ 4.548357] I2O subsystem v1.325
[ 4.549423] i2o: max drivers = 8
[ 4.550709] I2O Bus Adapter OSM v1.317
[ 4.552023] I2O SCSI Peripheral OSM v1.316
[ 4.553457] I2O ProcFS OSM v1.316
[ 4.554591] Fusion MPT base driver 3.04.20
[ 4.555974] Copyright (c) 1999-2008 LSI Corporation
[ 4.557640] Fusion MPT SPI Host driver 3.04.20
[ 4.559038] Fusion MPT FC Host driver 3.04.20
[ 4.560427] Fusion MPT SAS Host driver 3.04.20
[ 4.561864] Fusion MPT misc device (ioctl) driver 3.04.20
[ 4.563616] mptctl: Registered with Fusion MPT base driver
[ 4.565202] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.567529] aoe: AoE v85 initialised.
[ 4.568744] usbcore: registered new interface driver hwa-rc
[ 4.570531] usbcore: registered new interface driver i1480-dfu-usb
[ 4.572718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.574925] ehci-pci: EHCI PCI platform driver
[ 4.576475] ehci-platform: EHCI generic platform driver
[ 4.578276] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.581021] usbcore: registered new interface driver hwa-hc
[ 4.582713] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[ 4.587419] usbcore: registered new interface driver wusb-cbaf
[ 4.589317] usbcore: registered new interface driver cdc_acm
[ 4.591064] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.593595] usbcore: registered new interface driver usblp
[ 4.595433] usbcore: registered new interface driver uas
[ 4.597268] usbcore: registered new interface driver usb-storage
[ 4.599254] usbcore: registered new interface driver ums-alauda
[ 4.601256] usbcore: registered new interface driver ums-freecom
[ 4.603143] usbcore: registered new interface driver ums-isd200
[ 4.604975] usbcore: registered new interface driver ums-jumpshot
[ 4.606933] usbcore: registered new interface driver ums-karma
[ 4.608739] usbcore: registered new interface driver ums-onetouch
[ 4.610682] usbcore: registered new interface driver ums-realtek
[ 4.612538] usbcore: registered new interface driver ums-sddr09
[ 4.614378] usbcore: registered new interface driver ums-sddr55
[ 4.616383] usbcore: registered new interface driver ums-usbat
[ 4.618342] usbcore: registered new interface driver mdc800
[ 4.620228] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 4.622723] usbcore: registered new interface driver microtekX6
[ 4.624815] usbcore: registered new interface driver usbserial
[ 4.626655] usbcore: registered new interface driver belkin_sa
[ 4.628503] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 4.631274] usbcore: registered new interface driver ch341
[ 4.633052] usbserial: USB Serial support registered for ch341-uart
[ 4.634891] usbcore: registered new interface driver cp210x
[ 4.636616] usbserial: USB Serial support registered for cp210x
[ 4.638612] usbcore: registered new interface driver cyberjack
[ 4.640587] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 4.643452] usbcore: registered new interface driver cypress_m8
[ 4.645396] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 4.647605] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 4.649912] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 4.652104] usbcore: registered new interface driver usb_debug
[ 4.653933] usbserial: USB Serial support registered for debug
[ 4.655780] usbcore: registered new interface driver io_edgeport
[ 4.657705] usbserial: USB Serial support registered for Edgeport 2 port adapter
[ 4.660093] usbserial: USB Serial support registered for Edgeport 4 port adapter
[ 4.662542] usbserial: USB Serial support registered for Edgeport 8 port adapter
[ 4.664864] usbserial: USB Serial support registered for EPiC device
[ 4.666818] usbcore: registered new interface driver ipw
[ 4.668346] usbserial: USB Serial support registered for IPWireless converter
[ 4.670505] usbcore: registered new interface driver iuu_phoenix
[ 4.672381] usbserial: USB Serial support registered for iuu_phoenix
[ 4.674316] usbcore: registered new interface driver keyspan_pda
[ 4.676256] usbserial: USB Serial support registered for Keyspan PDA
[ 4.678150] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[ 4.680817] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 4.683796] usbcore: registered new interface driver kobil_sct
[ 4.685731] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[ 4.688186] usbcore: registered new interface driver metro_usb
[ 4.690025] usbserial: USB Serial support registered for Metrologic USB to Serial
[ 4.692247] usbcore: registered new interface driver mos7720
[ 4.694047] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 4.696243] usbcore: registered new interface driver mxuport
[ 4.698041] usbserial: USB Serial support registered for MOXA UPort
[ 4.700201] usbcore: registered new interface driver navman
[ 4.702060] usbserial: USB Serial support registered for navman
[ 4.704115] usbcore: registered new interface driver opticon
[ 4.705860] usbserial: USB Serial support registered for opticon
[ 4.707706] usbcore: registered new interface driver option
[ 4.709458] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.711537] usbcore: registered new interface driver oti6858
[ 4.713158] usbserial: USB Serial support registered for oti6858
[ 4.714647] usbcore: registered new interface driver pl2303
[ 4.715936] usbserial: USB Serial support registered for pl2303
[ 4.717628] usbcore: registered new interface driver qcaux
[ 4.719116] usbserial: USB Serial support registered for qcaux
[ 4.720796] usbcore: registered new interface driver qcserial
[ 4.722412] usbserial: USB Serial support registered for Qualcomm USB modem
[ 4.724218] usbcore: registered new interface driver quatech2
[ 4.725674] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[ 4.727787] usbcore: registered new interface driver safe_serial
[ 4.729174] usbserial: USB Serial support registered for safe_serial
[ 4.734269] usbcore: registered new interface driver ti_usb_3410_5052
[ 4.735657] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 4.741889] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 4.746186] usbcore: registered new interface driver visor
[ 4.749300] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 4.753703] usbserial: USB Serial support registered for Sony Clie 5.0
[ 4.757034] usbserial: USB Serial support registered for Sony Clie 3.5
[ 4.760271] usbcore: registered new interface driver whiteheat
[ 4.763424] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 4.766597] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[ 4.770212] usbcore: registered new interface driver xsens_mt
[ 4.773539] usbserial: USB Serial support registered for xsens_mt
[ 4.777370] usbcore: registered new interface driver zte_ev
[ 4.780821] usbserial: USB Serial support registered for zte_ev
[ 4.784156] usbcore: registered new interface driver adutux
[ 4.786526] usbcore: registered new interface driver appledisplay
[ 4.790943] usbcore: registered new interface driver cypress_cy7c63
[ 4.793620] usbcore: registered new interface driver cytherm
[ 4.797241] usbcore: registered new interface driver emi26 - firmware loader
[ 4.800473] usbcore: registered new interface driver emi62 - firmware loader
[ 4.804819] usbcore: registered new interface driver iowarrior
[ 4.808031] usbcore: registered new interface driver usblcd
[ 4.810374] usbcore: registered new interface driver usbled
[ 4.814035] usbcore: registered new interface driver legousbtower
[ 4.816558] usbcore: registered new interface driver usbtest
[ 4.819964] usbcore: registered new interface driver usb_ehset_test
[ 4.823570] usbcore: registered new interface driver trancevibrator
[ 4.826607] usbcore: registered new interface driver uss720
[ 4.830391] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[ 4.836032] uss720: NOTE: this is a special purpose driver to allow nonstandard
[ 4.840320] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[ 4.844697] uss720: If you just want to connect to a printer, use usblp instead
[ 4.856666] usbcore: registered new interface driver usbsevseg
[ 4.858118] usbcore: registered new interface driver sisusb
[ 4.859499] usbcore: registered new interface driver cxacru
[ 4.860872] usbcore: registered new interface driver speedtch
[ 4.862267] usbcore: registered new interface driver ueagle-atm
[ 4.863621] xusbatm: malformed module parameters
[ 4.864913] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.880982] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.882272] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.883562] serio: PARKBD AT adapter on parport0
[ 5.054057] mousedev: PS/2 mouse device common for all mice
[ 5.055417] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 5.057806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 5.060076] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 5.062715] usbcore: registered new interface driver appletouch
[ 5.064139] usbcore: registered new interface driver synaptics_usb
[ 5.065768] usbcore: registered new interface driver iforce
[ 5.067251] usbcore: registered new interface driver xpad
[ 5.068547] usbcore: registered new interface driver usb_acecad
[ 5.069965] usbcore: registered new interface driver aiptek
[ 5.071271] usbcore: registered new interface driver gtco
[ 5.072416] usbcore: registered new interface driver kbtab
[ 5.073733] usbcore: registered new interface driver wacom
[ 5.075375] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[ 5.077368] usbcore: registered new interface driver i2c-tiny-usb
[ 5.078956] Colour QuickCam for Video4Linux v0.06
[ 5.080088] parport0: no more devices allowed
[ 5.081137] c-qcam: couldn't register for parport0.
[ 5.082320] parport0: no more devices allowed
[ 5.083334] bw-qcam0: couldn't register for parport0.
[ 5.084575] usbcore: registered new interface driver radioshark
[ 5.086040] usbcore: registered new interface driver radioshark2
[ 5.087424] usbcore: registered new interface driver dsbr100
[ 5.088706] usbcore: registered new interface driver radio-keene
[ 5.090161] usbcore: registered new interface driver radio-ma901
[ 5.091630] usbcore: registered new interface driver radio-raremono
[ 5.093209] pps pps0: new PPS source ktimer
[ 5.094223] pps pps0: ktimer PPS source registered
[ 5.095343] pps_ldisc: PPS line discipline registered
[ 5.096560] Driver for 1-wire Dallas network protocol.
[ 5.097877] usbcore: registered new interface driver DS9490R
[ 5.099244] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 5.102324] pc87360: PC8736x not detected, module not inserted
[ 5.103713] sch56xx_common: Unsupported device id: 0xff
[ 5.104998] sch56xx_common: Unsupported device id: 0xff
[ 5.106618] usbcore: registered new interface driver pcwd_usb
[ 5.108016] acquirewdt: WDT driver for Acquire single board computer initialising
[ 5.109865] acquirewdt: I/O address 0x0043 already in use
[ 5.111157] acquirewdt: probe of acquirewdt failed with error -5
[ 5.112596] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[ 5.113890] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[ 5.115316] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[ 5.117226] wafer5823wdt: initialized. timeout=60 sec (nowayout=1)
[ 5.118703] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[ 5.120264] i6300esb: cannot register miscdev on minor=130 (err=-16)
[ 5.121774] i6300ESB timer: probe of 0000:00:04.0 failed with error -16
[ 5.123337] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.124786] it87_wdt: no device
[ 5.125586] sc1200wdt: build 20020303
[ 5.126512] sc1200wdt: io parameter must be specified
[ 5.127865] w83697hf_wdt: WDT driver for W83697HF/HG initializing
[ 5.129338] w83697hf_wdt: watchdog not found at address 0x2e
[ 5.130831] w83697hf_wdt: No W83697HF/HG could be found
[ 5.132042] w83877f_wdt: I/O address 0x0443 already in use
[ 5.133345] w83977f_wdt: driver v1.00
[ 5.134236] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[ 5.135784] machzwd: MachZ ZF-Logic Watchdog driver initializing
[ 5.137220] machzwd: no ZF-Logic found
[ 5.138179] md: linear personality registered for level -1
[ 5.139433] md: raid0 personality registered for level 0
[ 5.140712] md: raid1 personality registered for level 1
[ 5.141982] md: raid10 personality registered for level 10
[ 5.143357] md: raid6 personality registered for level 6
[ 5.144631] md: raid5 personality registered for level 5
[ 5.145890] md: raid4 personality registered for level 4
[ 5.147142] md: multipath personality registered for level -4
[ 5.148480] md: faulty personality registered for level -5
[ 5.149961] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 5.152064] device-mapper: multipath: version 1.7.0 loaded
[ 5.153383] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.154932] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 5.156484] device-mapper: raid: Loading target version 1.5.2
[ 5.157873] device-mapper: cache-policy-mq: version 1.2.0 loaded
[ 5.159285] device-mapper: cache cleaner: version 1.0.0 loaded
[ 5.160670] sdhci: Secure Digital Host Controller Interface driver
[ 5.162146] sdhci: Copyright(c) Pierre Ossman
[ 5.163311] usbcore: registered new interface driver ushc
[ 5.164631] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.166637] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.168322] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.170186] usbcore: registered new interface driver usbhid
[ 5.171479] usbhid: USB HID core driver
[ 5.172474] usbcore: registered new interface driver go7007
[ 5.173823] usbip_core: usbip_core_init:786: USB/IP Core v1.0.0
[ 5.175307] vhci_hcd: vhci_hcd_probe:998: name vhci_hcd id -1
[ 5.176677] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[ 5.178133] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1
[ 5.179750] vhci_hcd: vhci_start:882: enter vhci_start
[ 5.181254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.182853] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.184521] usb usb1: Product: USB/IP Virtual Host Controller
[ 5.185931] usb usb1: Manufacturer: Linux 3.14.0-rc7-11620-gc7d2e32 vhci_hcd
[ 5.187543] usb usb1: SerialNumber: vhci_hcd
[ 5.188763] hub 1-0:1.0: USB hub found
[ 5.189690] vhci_hcd: vhci_hub_control:244: typeReq a006 wValue 2900 wIndex 0
[ 5.191347] vhci_hcd: vhci_hub_control:302: GetHubDescriptor
[ 5.192696] vhci_hcd: vhci_hub_control:396: port -1
[ 5.193863] vhci_hcd: vhci_hub_control:403: bye
[ 5.194988] hub 1-0:1.0: 8 ports detected
[ 5.195925] vhci_hcd: vhci_hub_control:244: typeReq a000 wValue 0 wIndex 0
[ 5.197545] vhci_hcd: vhci_hub_control:306: GetHubStatus
[ 5.198811] vhci_hcd: vhci_hub_control:396: port -1
[ 5.199929] vhci_hcd: vhci_hub_control:403: bye
[ 5.201262] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 1
[ 5.202879] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 5.204259] vhci_hcd: vhci_hub_control:396: port 0
[ 5.205399] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 5.207311] vhci_hcd: dump_port_status_diff:115: +POWER
[ 5.208411] vhci_hcd: dump_port_status_diff:119:
[ 5.209530] vhci_hcd: vhci_hub_control:403: bye
[ 5.210644] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 2
[ 5.212235] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 5.213749] vhci_hcd: vhci_hub_control:396: port 1
[ 5.214885] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 5.216746] vhci_hcd: dump_port_status_diff:115: +POWER
[ 5.218006] vhci_hcd: dump_port_status_diff:119:
[ 5.219118] vhci_hcd: vhci_hub_control:403: bye
[ 5.220141] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 3
[ 5.221761] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 5.223284] vhci_hcd: vhci_hub_control:396: port 2
[ 5.224417] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 5.226329] vhci_hcd: dump_port_status_diff:115: +POWER
[ 5.227520] vhci_hcd: dump_port_status_diff:119:
[ 5.228641] vhci_hcd: vhci_hub_control:403: bye
[ 5.229772] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 4
[ 5.231371] vhci_hcd: vhci_hub_control:382: SetPortFeature: default 8
[ 5.232896] vhci_hcd: vhci_hub_control:396: port 3
[ 5.234053] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100
[ 5.235811] vhci_hcd: dump_port_status_diff:115: +POWER
[ 5.237083] vhci_hcd: dump_port_status_diff:119:
[ 5.238205] vhci_hcd: vhci_hub_control:403: bye
[ 5.239290] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 5
[ 5.240779] v