Hi Jarod,
FYI, since commit 4b71ca6bce ("[media] lirc_sir: make device
registration work"), kvm test boots will now hang after line
[ 46.488523] platform lirc_dev.0: lirc_dev: driver lirc_sir registered at minor
Attached is the dmesg and config.
Thanks,
Fengguang
[ 0.000000] Linux version 3.6.0-rc1-00214-gf5addb9 (kbuild@snb) (gcc version 4.7.1 (Debian 4.7.1-6) ) #5 PREEMPT Thu Aug 9 15:20:18 CST 2012
[ 0.000000] Command line: trinity=3m hung_task_panic=1 branch=net/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-09-15-20-57-net:master:f5addb9-f5addb9-x86_64-randconfig-s040-7-waimea-retry-ant noapic nolapic BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s040/f5addb9/vmlinuz-3.6.0-rc1-00214-gf5addb9
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff88000008d000] 8d000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff]
[ 0.000000] [mem 0x00000000-0x0fffdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x0e854000-0x0e8d5fff]
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 128516(98%)
[ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000000fffff40 00040
[ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00092fff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65409
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3901 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 960 pages used for memmap
[ 0.000000] DMA32 zone: 60478 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000093000 - 0000000000094000
[ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64379
[ 0.000000] Kernel command line: trinity=3m hung_task_panic=1 branch=net/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-08-09-15-20-57-net:master:f5addb9-f5addb9-x86_64-randconfig-s040-7-waimea-retry-ant noapic nolapic BOOT_IMAGE=kernel-tests/kernels/x86_64-randconfig-s040/f5addb9/vmlinuz-3.6.0-rc1-00214-gf5addb9
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 183860k/262136k available (13477k kernel code, 500k absent, 77776k reserved, 13450k data, 764k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5823 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 3192.005 MHz processor
[ 0.037044] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.01 BogoMIPS (lpj=12768020)
[ 0.041851] pid_max: default: 32768 minimum: 301
[ 0.061017] Mount-cache hash table entries: 256
[ 0.121847] mce: CPU supports 10 MCE banks
[ 0.127608] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.127608] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.127608] tlb_flushall_shift is 0xffffffff
[ 0.128329] CPU: AMD QEMU Virtual CPU version 1.1.0 stepping 03
[ 0.171506] ACPI: Core revision 20120711
[ 0.430358] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.467171] Performance Events:
[ 0.468714] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.470544] no hardware sampling interrupt available.
[ 0.472530] Broken PMU hardware detected, using software events only.
[ 0.474097] Failed to access perfctr msr (MSR c0010004 is 0)
[ 0.513632] Apic disabled
[ 0.580957] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.585301] RTC time: 11:49:17, date: 08/09/12
[ 0.597684] NET: Registered protocol family 16
[ 0.660784] ACPI: bus type pci registered
[ 0.673619] PCI: Using configuration type 1 for base access
[ 1.298296] bio: create slab
at 0
[ 1.324443] ACPI: Added _OSI(Module Device)
[ 1.325759] ACPI: Added _OSI(Processor Device)
[ 1.326917] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.328380] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.473864] ACPI: EC: Look up EC in DSDT
[ 1.883813] ACPI: Interpreter enabled
[ 1.884507] ACPI: (supports S0 S3 S4 S5)
[ 1.892544] ACPI: Using PIC for interrupt routing
[ 2.401987] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 2.416151] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.423052] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 2.424608] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 2.428592] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 2.430688] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 2.432928] PCI: root bus 00: using default resources
[ 2.436870] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 2.447252] PCI host bridge to bus 0000:00
[ 2.449326] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 2.452627] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.454429] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.456468] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[ 2.458575] pci_bus 0000:00: scanning bus
[ 2.464574] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 2.468154] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x11
[ 2.479268] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 2.486197] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 2.496905] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf]
[ 2.504824] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 2.506675] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x54
[ 2.513684] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x1c6
[ 2.516969] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 2.519155] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 2.521116] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x17
[ 2.525492] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 2.528939] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 2.533787] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 2.548863] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 2.553648] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 2.557902] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff]
[ 2.561788] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f]
[ 2.577779] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 2.583294] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 2.586087] pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f]
[ 2.592736] pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
[ 2.610840] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 2.614091] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf]
[ 2.620685] pci 0000:00:05.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
[ 2.638678] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[ 2.641998] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff]
[ 2.646921] pci 0000:00:06.0: reg 14: [mem 0xfebf3000-0xfebf3fff]
[ 2.666628] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[ 2.670095] pci 0000:00:07.0: reg 10: [io 0xc100-0xc13f]
[ 2.674737] pci 0000:00:07.0: reg 14: [mem 0xfebf4000-0xfebf4fff]
[ 2.695058] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[ 2.698173] pci 0000:00:08.0: reg 10: [io 0xc140-0xc17f]
[ 2.704689] pci 0000:00:08.0: reg 14: [mem 0xfebf5000-0xfebf5fff]
[ 2.725833] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 2.728171] pci 0000:00:09.0: reg 10: [io 0xc180-0xc1bf]
[ 2.728171] pci 0000:00:09.0: reg 14: [mem 0xfebf6000-0xfebf6fff]
[ 2.740537] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
[ 2.742530] pci 0000:00:0a.0: reg 10: [mem 0xfebf7000-0xfebf700f]
[ 2.754061] pci_bus 0000:00: fixups for bus
[ 2.755512] pci_bus 0000:00: bus scan returning with max=00
[ 2.756540] pci_bus 0000:00: on NUMA node 0
[ 2.758016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.817540] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 2.819241] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 3.624511] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 3.633118] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 3.640515] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 3.647447] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 3.654540] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 3.667258] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.669214] vgaarb: loaded
[ 3.669963] vgaarb: bridge control possible 0000:00:02.0
[ 3.697216] SCSI subsystem initialized
[ 3.698468] ACPI: bus type scsi registered
[ 3.702696] libata version 3.00 loaded.
[ 3.707608] ACPI: bus type usb registered
[ 3.710697] usbcore: registered new interface driver usbfs
[ 3.714234] usbcore: registered new interface driver hub
[ 3.718705] usbcore: registered new device driver usb
[ 3.728091] Linux video capture interface: v2.00
[ 3.737646] PCI: Using ACPI for IRQ routing
[ 3.739072] PCI: pci_cache_line_size set to 64 bytes
[ 3.741766] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0)
[ 3.743444] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0)
[ 3.744505] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0)
[ 3.746075] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0)
[ 3.748477] pci 0000:00:01.1: BAR 4: reserving [io 0xc1c0-0xc1cf flags 0x40101] (d=0, p=0)
[ 3.750395] pci 0000:00:02.0: BAR 0: reserving [mem 0xfc000000-0xfdffffff flags 0x42208] (d=0, p=0)
[ 3.752626] pci 0000:00:02.0: BAR 1: reserving [mem 0xfebf0000-0xfebf0fff flags 0x40200] (d=0, p=0)
[ 3.754503] pci 0000:00:03.0: BAR 0: reserving [mem 0xfeba0000-0xfebbffff flags 0x40200] (d=0, p=0)
[ 3.756484] pci 0000:00:03.0: BAR 1: reserving [io 0xc000-0xc03f flags 0x40101] (d=0, p=0)
[ 3.758267] pci 0000:00:04.0: BAR 0: reserving [io 0xc040-0xc07f flags 0x40101] (d=0, p=0)
[ 3.760484] pci 0000:00:04.0: BAR 1: reserving [mem 0xfebf1000-0xfebf1fff flags 0x40200] (d=0, p=0)
[ 3.762339] pci 0000:00:05.0: BAR 0: reserving [io 0xc080-0xc0bf flags 0x40101] (d=0, p=0)
[ 3.764485] pci 0000:00:05.0: BAR 1: reserving [mem 0xfebf2000-0xfebf2fff flags 0x40200] (d=0, p=0)
[ 3.766337] pci 0000:00:06.0: BAR 0: reserving [io 0xc0c0-0xc0ff flags 0x40101] (d=0, p=0)
[ 3.768509] pci 0000:00:06.0: BAR 1: reserving [mem 0xfebf3000-0xfebf3fff flags 0x40200] (d=0, p=0)
[ 3.770370] pci 0000:00:07.0: BAR 0: reserving [io 0xc100-0xc13f flags 0x40101] (d=0, p=0)
[ 3.772461] pci 0000:00:07.0: BAR 1: reserving [mem 0xfebf4000-0xfebf4fff flags 0x40200] (d=0, p=0)
[ 3.774319] pci 0000:00:08.0: BAR 0: reserving [io 0xc140-0xc17f flags 0x40101] (d=0, p=0)
[ 3.775929] pci 0000:00:08.0: BAR 1: reserving [mem 0xfebf5000-0xfebf5fff flags 0x40200] (d=0, p=0)
[ 3.776632] pci 0000:00:09.0: BAR 0: reserving [io 0xc180-0xc1bf flags 0x40101] (d=0, p=0)
[ 3.778248] pci 0000:00:09.0: BAR 1: reserving [mem 0xfebf6000-0xfebf6fff flags 0x40200] (d=0, p=0)
[ 3.780636] pci 0000:00:0a.0: BAR 0: reserving [mem 0xfebf7000-0xfebf700f flags 0x40200] (d=0, p=0)
[ 3.786543] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff]
[ 3.788593] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 3.818608] Bluetooth: Core ver 2.16
[ 3.820794] NET: Registered protocol family 31
[ 3.821773] Bluetooth: HCI device and connection manager initialized
[ 3.823452] Bluetooth: HCI socket layer initialized
[ 3.824648] Bluetooth: L2CAP socket layer initialized
[ 3.827037] Bluetooth: SCO socket layer initialized
[ 3.828650] NET: Registered protocol family 8
[ 3.829627] NET: Registered protocol family 20
[ 3.843312] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 3.864916] Switching to clocksource hpet
[ 3.870992] FS-Cache: Loaded
[ 3.873793] CacheFiles: Loaded
[ 3.879481] pnp: PnP ACPI init
[ 3.881151] ACPI: bus type pnp registered
[ 3.886039] pnp 00:00: [bus 00-ff]
[ 3.887573] pnp 00:00: [io 0x0cf8-0x0cff]
[ 3.888660] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 3.889676] pnp 00:00: [io 0x0d00-0xffff window]
[ 3.891285] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 3.892459] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 3.901136] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 3.905082] pnp 00:01: [io 0x0070-0x0071]
[ 3.907184] pnp 00:01: [irq 8]
[ 3.908117] pnp 00:01: [io 0x0072-0x0077]
[ 3.911399] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.916197] pnp 00:02: [io 0x0060]
[ 3.917095] pnp 00:02: [io 0x0064]
[ 3.917895] pnp 00:02: [irq 1]
[ 3.921109] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.925244] pnp 00:03: [irq 12]
[ 3.928591] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 3.933266] pnp 00:04: [io 0x03f2-0x03f5]
[ 3.934704] pnp 00:04: [io 0x03f7]
[ 3.935520] pnp 00:04: [irq 6]
[ 3.936641] pnp 00:04: [dma 2]
[ 3.939914] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 3.945353] pnp 00:05: [io 0x0378-0x037f]
[ 3.946699] pnp 00:05: [irq 7]
[ 3.949460] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 3.955181] pnp 00:06: [io 0x03f8-0x03ff]
[ 3.956140] pnp 00:06: [irq 4]
[ 3.959604] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.979583] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 3.985094] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 3.998647] pnp: PnP ACPI: found 8 devices
[ 3.999688] ACPI: ACPI bus type pnp unregistered
[ 4.131771] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 4.133059] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[ 4.136426] NET: Registered protocol family 1
[ 4.139196] pci 0000:00:00.0: calling quirk_natoma+0x0/0x40
[ 4.140411] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.141615] pci 0000:00:00.0: calling quirk_passive_release+0x0/0xb0
[ 4.143695] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 4.145685] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x43
[ 4.147391] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 4.149119] pci 0000:00:02.0: calling pci_fixup_video+0x0/0x104
[ 4.150869] pci 0000:00:02.0: Boot video device
[ 4.152139] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x1cd
[ 4.155194] PCI: CLS 0 bytes, default 64
[ 4.185609] Unpacking initramfs...
[ 32.011678] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[ 32.369191] DMA-API: preallocated 32768 debug entries
[ 32.370877] DMA-API: debugging enabled by kernel config
[ 32.388404] kvm: Nested Virtualization enabled
[ 32.411520] Machine check injector initialized
[ 32.426430] cryptomgr_test (16) used greatest stack depth: 7056 bytes left
[ 32.432277] cryptomgr_test (17) used greatest stack depth: 6944 bytes left
[ 32.438449] cryptomgr_test (18) used greatest stack depth: 6864 bytes left
[ 32.463312] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 32.507465] Initializing RT-Tester: OK
[ 32.511309] rcu-torture:--- Start of test: nreaders=2 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/1 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[ 32.560660] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 32.776745] VFS: Disk quotas dquot_6.5.2
[ 32.784581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 32.821451] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 32.850772] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 32.857639] QNX6 filesystem 1.0.0 registered.
[ 32.859219] fuse init (API version 7.19)
[ 32.872285] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 32.918632] OCFS2 1.5.0
[ 32.927985] ocfs2: Registered cluster interface o2cb
[ 32.929170] OCFS2 DLMFS 1.5.0
[ 32.935431] OCFS2 User DLM kernel interface loaded
[ 32.936541] OCFS2 Node Manager 1.5.0
[ 32.956860] OCFS2 DLM 1.5.0
[ 33.068494] NET: Registered protocol family 38
[ 33.076444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 33.079543] io scheduler noop registered (default)
[ 33.080649] start plist test
[ 33.157796] end plist test
[ 33.184099] xz_dec_test: module loaded
[ 33.185101] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it.
[ 33.215392] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[ 33.217805] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[ 33.221287] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 33.223180] i2c-core: driver [adp8860_bl] using legacy resume method
[ 33.237457] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 33.248492] vmlfb: initializing
[ 33.256714] hgafb: HGA card not detected.
[ 33.258697] hgafb: probe of hgafb.0 failed with error -22
[ 33.292884] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000
[ 33.304559] fbcon: CL Picasso4 (fb0) is primary device
[ 33.403309] tsc: Refined TSC clocksource calibration: 3192.000 MHz
[ 33.403739] Switching to clocksource tsc
[ 33.646018] Console: switching to colour frame buffer device 80x30
[ 34.183425] usbcore: registered new interface driver udlfb
[ 34.350892] usbcore: registered new interface driver smscufx
[ 34.535193] kworker/u:0 (82) used greatest stack depth: 5448 bytes left
[ 34.700861] uvesafb: failed to execute /sbin/v86d
[ 34.855257] uvesafb: make sure that the v86d helper is installed and executable
[ 35.171601] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 35.342828] uvesafb: vbe_init() failed with -22
[ 35.513680] uvesafb: probe of uvesafb.0 failed with error -22
[ 35.721273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 36.373940] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 36.537520] enter max3107 init
[ 36.712628] Non-volatile memory driver v1.3
[ 36.876524] smapi::smapi_init, ERROR invalid usSmapiID
[ 37.039793] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 37.369262] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 37.703268] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 37.871716] Linux agpgart interface v0.103
[ 38.039091] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 38.381824] Hangcheck: Using getrawmonotonic().
[ 38.553880] [drm] Initialized drm 1.1.0 20060810
[ 38.734893] [drm] radeon defaulting to userspace modesetting.
[ 39.076140] i2c-core: driver [ch7006] using legacy suspend method
[ 39.243953] i2c-core: driver [ch7006] using legacy resume method
[ 39.412933] Phantom Linux Driver, version n0.9.8, init OK
[ 39.587367] i2c-core: driver [fsa9480] using legacy suspend method
[ 39.742467] i2c-core: driver [fsa9480] using legacy resume method
[ 39.893808] Driver for timberdale has been successfully registered.
[ 40.050776] Uniform Multi-Platform E-IDE driver
[ 40.219567] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[ 40.378769] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[ 40.532530] PIIX_IDE 0000:00:01.1: enabling bus mastering
[ 40.686715] PIIX_IDE 0000:00:01.1: setting latency timer to 64
[ 40.835001] ide0: BM-DMA at 0xc1c0-0xc1c7
[ 40.985436] ide1: BM-DMA at 0xc1c8-0xc1cf
[ 41.133547] Probing IDE interface ide0...
[ 41.851934] Probing IDE interface ide1...
[ 42.739974] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[ 43.565779] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[ 43.701841] hdc: MWDMA2 mode selected
[ 43.835584] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 43.970812] ide1 at 0x170-0x177,0x376 on irq 15
[ 44.123364] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 44.381449] ide-gd driver 1.18
[ 44.514030] Loading iSCSI transport class v2.0-870.
[ 44.650434] rdac: device handler registered
[ 44.777761] emc: device handler registered
[ 44.917441] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 45.051126] scsi:
Detection failed (no card)
[ 45.178384] Brocade BFA FC/FCOE SCSI driver - version: 3.0.23.0
[ 45.332429] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 45.462757] PCI: setting IRQ 11 as level-triggered
[ 45.606767] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 45.751108] PCI: setting IRQ 10 as level-triggered
[ 45.908618] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 46.066053] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 46.408819] DC390: clustering now enabled by default. If you get problems load
[ 46.693038] with "disable_clustering=1" and report to maintainers
[ 46.836192] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 47.052484] ipr: IBM Power RAID SCSI Device Driver version: 2.5.3 (March 10, 2012)
[ 47.286705] RocketRAID 3xxx/4xxx Controller driver v1.6 (091225)
[ 47.409431] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 47.534519] iscsi: registered transport (be2iscsi)
[ 47.656244] VMware PVSCSI driver - version 1.0.2.0-k
[ 47.773792] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 47.965225] osst :I: Tape driver with OnStream support version 0.99.4
[ 47.965225] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 48.229422] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 48.487693] spi_ks8995: Micrel KS8995 Ethernet switch SPI driver version 0.1.1
[ 48.735905] tun: Universal TUN/TAP device driver, 1.6
[ 48.864447] tun: (C) 1999-2004 Max Krasnyansky
[ 48.997016] arcnet loaded.
[ 49.178948] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 49.327202] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[ 49.574499] arcnet: raw mode (`r') encapsulation support loaded.
[ 49.705765] arcnet: cap mode (`c') encapsulation support loaded.
[ 49.824010] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 49.938535] Copyright (c) 2007 Atheros Corporation.
[ 50.055092] Brocade 10G Ethernet driver - version: 3.0.23.0
[ 50.174879] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 50.294770] e100: Copyright(c) 1999-2006 Intel Corporation
[ 50.471081] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 50.580017] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 50.683623] e1000 0000:00:03.0: enabling bus mastering
[ 50.783868] e1000 0000:00:03.0: setting latency timer to 64
[ 51.249891] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[ 51.401317] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 51.554612] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 51.702795] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 51.854866] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k
[ 52.002567] igb: Copyright (c) 2007-2012 Intel Corporation.
[ 52.148508] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.6.0-k
[ 52.423169] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 52.569248] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 52.715137] sky2: driver version 1.30
[ 52.861338] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 53.010838] QLogic/NetXen Network Driver v4.0.80
[ 53.160617] PPP generic driver version 2.4.2
[ 53.303686] PPP BSD Compression module registered
[ 53.434940] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[ 53.565520] SLIP linefill/keepalive option.
[ 53.699859] usbcore: registered new interface driver kaweth
[ 53.836887] usbcore: registered new interface driver asix
[ 53.972314] usbcore: registered new interface driver cdc_ether
[ 54.113012] usbcore: registered new interface driver dm9601
[ 54.254718] usbcore: registered new interface driver smsc95xx
[ 54.344759] usbcore: registered new interface driver cdc_subset
[ 54.431266] usbcore: registered new interface driver zaurus
[ 54.516307] usbcore: registered new interface driver int51x1
[ 54.628691] usbcore: registered new interface driver cdc_phonet
[ 54.754884] usbcore: registered new interface driver kalmia
[ 54.874692] usbcore: registered new interface driver cx82310_eth
[ 54.995086] Madge ATM Horizon [Ultra] driver version 1.2.1
[ 55.116162] idt77252_init: at ffffffff82a97092
[ 55.231930] Fusion MPT base driver 3.04.20
[ 55.344648] Copyright (c) 1999-2008 LSI Corporation
[ 55.448074] Fusion MPT SPI Host driver 3.04.20
[ 55.549093] Fusion MPT FC Host driver 3.04.20
[ 55.651028] Fusion MPT SAS Host driver 3.04.20
[ 55.762799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 55.861101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 55.963901] driver u132_hcd
[ 56.075212] usbcore: registered new interface driver cdc_acm
[ 56.183745] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 56.408232] usbcore: registered new interface driver usblp
[ 56.527644] usbcore: registered new interface driver cdc_wdm
[ 56.644204] Initializing USB Mass Storage driver...
[ 56.764960] usbcore: registered new interface driver usb-storage
[ 56.887102] USB Mass Storage support registered.
[ 57.011899] usbcore: registered new interface driver ums-cypress
[ 57.140934] usbcore: registered new interface driver ums-datafab
[ 57.271027] usbcore: registered new interface driver ums-karma
[ 57.401551] usbcore: registered new interface driver ums-onetouch
[ 57.533248] usbcore: registered new interface driver ums-realtek
[ 57.664818] usbcore: registered new interface driver ums-sddr09
[ 57.795781] usbcore: registered new interface driver ums-usbat
[ 57.925242] usbcore: registered new interface driver mdc800
[ 58.051478] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 58.313589] usbcore: registered new interface driver microtekX6
[ 58.455681] usbcore: registered new interface driver adutux
[ 58.596384] usbcore: registered new interface driver cypress_cy7c63
[ 58.735793] driver ftdi-elan
[ 58.884221] usbcore: registered new interface driver ftdi-elan
[ 59.028425] usbcore: registered new interface driver ldusb
[ 59.169051] usbcore: registered new interface driver usbled
[ 59.303585] usbcore: registered new interface driver ueagle-atm
[ 59.428492] xusbatm: malformed module parameters
[ 59.557091] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 59.810671] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 59.948398] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 60.097558] mousedev: PS/2 mouse device common for all mice
[ 60.253373] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 60.524141] usbcore: registered new interface driver bcm5974
[ 60.666665] usbcore: registered new interface driver synaptics_usb
[ 60.809172] usbcore: registered new interface driver iforce
[ 60.952403] usbcore: registered new interface driver xpad
[ 61.085725] usbcore: registered new interface driver aiptek
[ 61.220741] usbcore: registered new interface driver kbtab
[ 61.358979] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[ 61.504654] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 61.650700] rtc_cmos 00:01: RTC can wake from S4
[ 61.795205] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 61.927953] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 62.058996] hpet1: lost 7 rtc interrupts
[ 62.229468] rtc-test rtc-test.0: rtc core: registered test as rtc1
[ 62.369833] rtc-test rtc-test.1: rtc core: registered test as rtc2
[ 62.537124] usbcore: registered new interface driver i2c-diolan-u2c
[ 62.731784] i2c-parport-light: adapter type unspecified
[ 62.887071] lirc_dev: IR Remote Control driver registered, major 243
[ 63.032978] IR NEC protocol handler initialized
[ 63.174705] IR RC5(x) protocol handler initialized
[ 63.308845] IR RC6 protocol handler initialized
[ 63.433161] IR JVC protocol handler initialized
[ 63.556064] IR Sony protocol handler initialized
[ 63.675924] IR SANYO protocol handler initialized
[ 63.791555] IR LIRC bridge handler initialized
[ 63.903785] Driver for 1-wire Dallas network protocol.
[ 64.018571] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 64.139585] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 64.418400] applesmc: supported laptop not found!
[ 64.506868] applesmc: driver init failed (ret=-19)!
[ 64.607647] pc87360: PC8736x not detected, module not inserted
[ 64.695997] sch56xx_common: Unsupported device id: 0xff
[ 64.785406] sch56xx_common: Unsupported device id: 0xff
[ 64.880109] usbcore: registered new interface driver pcwd_usb
[ 64.967139] acquirewdt: WDT driver for Acquire single board computer initialising
[ 65.142513] acquirewdt: I/O address 0x0043 already in use
[ 65.230599] acquirewdt: probe of acquirewdt failed with error -5
[ 65.323989] ib700wdt: WDT driver for IB700 single board computer initialising
[ 65.469203] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[ 65.624758] i6300esb: cannot register miscdev on minor=130 (err=-16)
[ 65.762950] i6300ESB timer: probe of 0000:00:0a.0 failed with error -16
[ 65.895314] sbc60xxwdt: I/O address 0x0443 already in use
[ 66.031594] sbc8360: failed to register misc device
[ 66.140735] cpu5wdt: misc_register failed
[ 66.234037] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[ 66.433873] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 66.566862] w83697hf_wdt: WDT driver for W83697HF/HG initializing
[ 66.739402] w83697hf_wdt: watchdog not found at address 0x2e
[ 66.844674] w83697hf_wdt: No W83697HF/HG could be found
[ 66.947052] w83977f_wdt: driver v1.00
[ 67.046546] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[ 67.147525] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[ 67.251138] Bluetooth: HCI UART driver ver 2.2
[ 67.355697] Bluetooth: HCI H4 protocol initialized
[ 67.459961] Bluetooth: HCI BCSP protocol initialized
[ 67.570038] usbcore: registered new interface driver bcm203x
[ 67.688493] usbcore: registered new interface driver bfusb
[ 67.836059] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 67.991318] cpuidle: using governor ladder
[ 68.106645] sdhci: Secure Digital Host Controller Interface driver
[ 68.213746] sdhci: Copyright(c) Pierre Ossman
[ 68.327985] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 68.338366] usbcore: registered new interface driver vub300
[ 68.547878] sdhci-pltfm: SDHCI platform and OF driver helper
[ 68.663493] leds_ss4200: no LED devices found
[ 68.776732] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 69.010477] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 69.346889] usbcore: registered new interface driver usbhid
[ 69.453145] usbhid: USB HID core driver
[ 69.560624] usbcore: registered new interface driver lirc_sasem
[ 69.676451] platform lirc_dev.0: lirc_dev: driver lirc_sir registered at minor = 0
Kernel freezed on [ 69.676451] platform lirc_dev.0: lirc_dev: driver lirc_sir registered at minor = 0
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.6.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# RCU Subsystem
#
CONFIG_TINY_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=1
CONFIG_RCU_BOOST_DELAY=500
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_MPPARSE is not set
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_IRQ_TIME_ACCOUNTING=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_PHONET=y
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
# CONFIG_CAN_GW is not set
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_WILINK=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=y
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
# CONFIG_BMP085_I2C is not set
CONFIG_BMP085_SPI=y
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_IDE_GD_ATA is not set
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_DELKIN=y
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
# CONFIG_SCSI_IPR_TRACE is not set
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_BFA_FC=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not se