Hi,
Summary of Problem:
System reboots on graphical load with Intel HD 4000 iGPU since Linux
3.10
The full bug-report including all attachments is available on bugzilla and
below:
https://bugzilla.kernel.org/show_bug.cgi?id=94551
I hope I have managed to fill the report correctly and provided enough
information. My apology for the mistakes that remains. Please let me
know about further information that would be helpful.
Should I try to git bisec Linux between 3.9 and 3.10? (I'm not sure how
to do this properly, so pointers would be good).
I'm not subscribed to any Linux ML. If possible, please keep me in Cc if
replying to the email.
Thanks,
Rasmus
1 Full description of the problem/report
════════════════════════════════════════
I experience reboots crashing on my Thinkpad W530 with HD4000 whenever
the iGPU is exposed to moderate load, e.g. playing a video game or
movies. This only happens when I employ the Intel iGPU. It happens
irrespective of whether Nvidia Optimus in enabled.
It seems this error was introduced between Linux 3.9 and 3.10. Fedora
19 is stable. Fedora 20 is not. I have tested 3.9 with the current
Xorg stack on Archlinux and it is also stable. 3.10 is not. Windows
7 is also stable.
It’s not a hardware issue! I can run mprime cpu load indefinitely on
the system without a crash. The temperature never goes above 90
degrees when I run any test. This problem is confirmed on two W530
machines.
It does not seem to be a Intel driver bug as I the current Xorg stack
works with Linux 3.9. A bug was first filled against Intel drivers,
see section [#links].
Logs are produced with clean Fedora images.
[#links] See section 7.2
2 Keywords
══════════
hard crash, Kernel, Thinkpad, Intel graphics, iGPU
3 Kernel version (from /proc/version)
═════════════════════════════════════
3.1 Fedora 21
─────────────
Linux version 3.18.7-200.fc21.x86_64
(mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 4.9.2
20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Wed Feb 11 21:53:17 UTC 2015
3.2 Fedora 19
─────────────
Linux version 3.9.5-301.fc19.x86_64
(mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.1
20130603 (Red Hat 4.8.1-1) (GCC) ) #1 SMP Tue Jun 11 19:39:38 UTC 2013
4 Output of Oops.. message (if applicable) with symbolic information
════════════════════════════════════════════════════════════════════
I don’t see Oops messages… Please see the enclosed files.
5 How to reproduce
══════════════════
1. Download gputest from [http://www.geeks3d.com/gputest/]
2. Run start_furmark_windowed_1024x640.sh. Put it in full screen if
you like.
3. On my system the computer crashes and reboots typically within 10
minutes.
The reboot is as if power was cut and returned. Like if the CPU
was
overheating (which it is not). IOW: The systemctl shutdown logs
are not
displayed.
6 Environment
═════════════
Thinkpad W530? (I don’t understand this question).
6.1 Software (add the output of the ver_linux script here)
──────────────────────────────────────────────────────────
6.1.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see ver_linux_fedora_21.txt.
6.1.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see ver_linux_fedora_19.txt.
6.2 Processor information (from /proc/cpuinfo)
──────────────────────────────────────────────
6.2.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
I believe this is part of ver_linux_fedora_21.txt.
6.2.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
I believe this is part of ver_linux_fedora_19.txt.
6.3 Module information (from /proc/modules)
───────────────────────────────────────────
6.3.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see modules_fedora_21.txt
6.3.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see modules_fedora_19.txt
6.4 Loaded driver and hardware information (/proc/ioports, /proc/iomem)
───────────────────────────────────────────────────────────────────────
6.4.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
6.4.1.1 /proc/ioports
┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄
Please see ioports_fedora_21.txt.
6.4.1.2 /proc/iomem
┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄
Please see iomem_fedora_21.txt.
6.4.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
6.4.2.1 /proc/ioports
┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄
Please see ioports_fedora_19.txt.
6.4.2.2 /proc/iomem
┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄┄
Please see iomem_fedora_19.txt.
6.5 PCI information (‘lspci -vvv’ as root)
──────────────────────────────────────────
6.5.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see lspci_fedora_21.txt
6.5.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Please see lspci_fedora_19.txt
6.6 SCSI information (from /proc/scsi/scsi)
───────────────────────────────────────────
6.6.1 Fedora 21
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Crucial_CT256MX1 Rev: MU01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: DVD-RAM UJ8C0 Rev: SB01
Type: CD-ROM ANSI SCSI revision: 05
6.6.2 Fedora 19
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Crucial_CT256MX1 Rev: MU01
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: DVD-RAM UJ8C0 Rev: SB01
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: Kingston Model: DataTraveler 3.0 Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 06
6.7 Other information that might be relevant to the problem
───────────────────────────────────────────────────────────
Not that I am aware of.
7 Other notes, patches, fixes, workarounds
══════════════════════════════════════════
7.1 Other enclosures
────────────────────
dmesg_fedora_21.txt: netconsole output of Fedora 21 with crash.
dmesg_fedora_19.txt: dmesg after running Furmark for a bit in
Fedora 19. (My understanding is that this should
be similar to
the netcat output)
xorg_crash_fedora_21.txt: an example of an Xorg-log when the server
is crashing.
bios_settings.txt: settings in the bios with some notes.
7.2 Other iteration of this bug report
──────────────────────────────────────
This bug was first reported here:
[https://bugs.freedesktop.org/show_bug.cgi?id=89451]
It has been discussed here:
[http://forum.thinkpads.com/viewtopic.php?f=70&t=116472]
--
Got mashed potatoes. Ain't got no T-Bone. No T-Bone
Rasmus Pank Roulund
1 Main
══════
• UEFI BIOS version: G5ETA1WW (2.61)
• UEFI BIOS Date: 2015-01-22
• Embedded Controller Version: G4HT39WW (1.13)
• Machine Type Model: 255150G
• System-unit Serial number: x
• System board serial number: x
• Asset tag: no asset information
• CPU type: Intel Core i7-3840QM
• CPU speed: 2.8Ghz
• Memory: 32GB
• UUID: x
• Mac address: x
• preinstalled OS license: No DPK
• UEFI secure boot: off
2 config
════════
2.1 network
───────────
• Wake on LAN: ac only
• UEFI ipv4 network stack: 1
• UEFI ipv4 network stack: 1
• UEFI pxe boot priority: ipv4
2.2 usb
───────
• usb uefi bios support: 1
• always on usb: 1
• always on usb charge in off mode: 0
• usb 3 mode: auto
2.3 keyboard/mouse
──────────────────
• trackpoint: 1
• touch pad: 1
• fn-ctrl swap: 0
• fn key lock: 0
• keyboard illumination: both
2.4 display
───────────
• boot display device: Thinkpad lcd
• graphics device: Integrated (choices: integrated, discrete, Nvidia
optimus)
• OS detection of nvidia optimus: 0
2.5 power
─────────
• Intel speedstep: 1
• mode for ac: max performance
• mode for battery: battery optimization
• adaptive thermal management:
• scheme for ac: max performance
• scheme for bat: balanced
• optical drive speed: normal
• pci express power management: 0 (problem also happens when 1)
• express card speed: auto
• power on with ac attach: 0
• intel rapid start tech: 0 (problem also happens when 1)
2.6 beep and alarm
──────────────────
• password beep: 0
• keyboard beep: 1
2.7 sata
────────
• Sata mode: AHCI
2.8 cpu
───────
• core multi processing: 1
• intel hyper threading tech: 1
2.9 intel amt
─────────────
• intel amt control: 0
3 date/time
═══════════
default
4 security
══════════
4.1 password (skipped)
──────────────────────
4.2 fingerprint (skipped)
─────────────────────────
4.3 uefi bios update option
───────────────────────────
• flash update by end user: 1
• secure rollback prevention: 0
4.4 memory protection
─────────────────────
execution prevention: 0 (problem also happens when 1)
4.5 virtualization
──────────────────
• intel virt. tech: 1
• intel vt-d feature: 1
4.6 I/O ports (all enabled)
───────────────────────────
4.7 anti-theft (disabled)
─────────────────────────
4.8 secure-boot
───────────────
• secure bot: disabled
• platform mode: user mode
• secure boot mode: std. mode
5 Startup (default)
═══════════════════
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.5-301.fc19.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.1 20130603 (Red Hat 4.8.1-1) (GCC) ) #1 SMP Tue Jun 11 19:39:38 UTC 2013
[ 0.000000] Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-Live-Desktop-x86_64-19-1 rootfstype=auto ro rd.live.image quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a59f3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a59f4000-0x00000000bae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000083e600000-0x000000083effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 244150G/244150G, BIOS G5ETA1WW (2.61 ) 01/22/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x83e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask E00000000 write-back
[ 0.000000] 7 base 400000000 mask C00000000 write-back
[ 0.000000] 8 base 800000000 mask FC0000000 write-back
[ 0.000000] 9 base 83F000000 mask FFF000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa59f4 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fc4000, 0x01fc4fff] PGTABLE
[ 0.000000] BRK [0x01fc5000, 0x01fc5fff] PGTABLE
[ 0.000000] BRK [0x01fc6000, 0x01fc6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x83e400000-0x83e5fffff]
[ 0.000000] [mem 0x83e400000-0x83e5fffff] page 2M
[ 0.000000] BRK [0x01fc7000, 0x01fc7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x83c000000-0x83e3fffff]
[ 0.000000] [mem 0x83c000000-0x83e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x83bffffff]
[ 0.000000] [mem 0x800000000-0x83bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa59f3fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa57fffff] page 2M
[ 0.000000] [mem 0xa5800000-0xa59f3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x1e31e000-0x1ffdefff]
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe170 000C4 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: FACP 00000000bafe6000 0010C (v05 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000bafe8000 10FD9 (v01 LENOVO TP-G5 00002610 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf54000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-G5 00002610 PTL 00000001)
[ 0.000000] ACPI: TCPA 00000000baffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000baffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000baffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000baff9000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000bafe4000 00038 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000bafe3000 00098 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000bafe2000 0003C (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000bafe1000 00052 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: FPDT 00000000bafe0000 00064 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000bafe7000 000A5 (v32 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafdf000 0003E (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000bafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000bafdd000 00055 (v03 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000bafdc000 00D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafdb000 00A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 00000000bafda000 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000bafd9000 002A6 (v01 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: DBG2 00000000bafd8000 000E9 (v00 LENOVO TP-G5 00002610 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83e5fffff]
[ 0.000000] NODE_DATA [mem 0x83e5cd000-0x83e5e0fff]
[ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e200000-ffff88083dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x83e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa59f3fff]
[ 0.000000] node 0: [mem 0x100000000-0x83e5fffff]
[ 0.000000] On node 0 totalpages: 8273295
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10528 pages used for memmap
[ 0.000000] DMA32 zone: 673779 pages, LIFO batch:31
[ 0.000000] Normal zone: 118680 pages used for memmap
[ 0.000000] Normal zone: 7595520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a59f4000 - 00000000bae9f000
[ 0.000000] PM: Registered nosave memory: 00000000bae9f000 - 00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bafff000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88083e200000 s85120 r8192 d21376 u262144
[ 0.000000] pcpu-alloc: s85120 r8192 d21376 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8144002
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-Live-Desktop-x86_64-19-1 rootfstype=auto ro rd.live.image quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 32462024k/34576384k available (6473k kernel code, 1483204k absent, 631156k reserved, 6764k data, 1352k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 132644864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2793.650 MHz processor
[ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.30 BogoMIPS (lpj=2793650)
[ 0.000012] pid_max: default: 32768 minimum: 301
[ 0.000037] Security Framework initialized
[ 0.000043] SELinux: Initializing.
[ 0.000049] SELinux: Starting in permissive mode
[ 0.001909] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.008992] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.012081] Mount-cache hash table entries: 256
[ 0.012230] Initializing cgroup subsys cpuacct
[ 0.012232] Initializing cgroup subsys memory
[ 0.012238] Initializing cgroup subsys devices
[ 0.012239] Initializing cgroup subsys freezer
[ 0.012240] Initializing cgroup subsys net_cls
[ 0.012241] Initializing cgroup subsys blkio
[ 0.012242] Initializing cgroup subsys perf_event
[ 0.012265] CPU: Physical Processor ID: 0
[ 0.012266] CPU: Processor Core ID: 0
[ 0.012270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012589] mce: CPU supports 9 MCE banks
[ 0.012601] CPU0: Thermal monitoring enabled (TM1)
[ 0.012609] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.012712] Freeing SMP alternatives: 24k freed
[ 0.013689] ACPI: Core revision 20130117
[ 0.019055] ACPI: All ACPI Tables successfully acquired
[ 0.020312] ftrace: allocating 24409 entries in 96 pages
[ 0.030340] dmar: Host address width 36
[ 0.030341] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.030346] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.030347] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.030350] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.030351] dmar: RMRR base: 0x000000ba3ba000 end: 0x000000ba3d0fff
[ 0.030352] dmar: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.030425] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.030426] HPET id 0 under DRHD base 0xfed91000
[ 0.030553] Enabled IRQ remapping in x2apic mode
[ 0.030554] Enabling x2apic
[ 0.030555] Enabled x2apic
[ 0.030562] Switched APIC routing to cluster x2apic.
[ 0.031006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041020] smpboot: CPU0: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.041029] TSC deadline timer enabled
[ 0.041036] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.041041] ... version: 3
[ 0.041042] ... bit width: 48
[ 0.041042] ... generic registers: 4
[ 0.041043] ... value mask: 0000ffffffffffff
[ 0.041044] ... max period: 000000007fffffff
[ 0.041045] ... fixed-purpose events: 3
[ 0.041045] ... event mask: 000000070000000f
[ 0.055698] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.042021] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.136867] Brought up 8 CPUs
[ 0.136870] smpboot: Total of 8 processors activated (44698.40 BogoMIPS)
[ 0.144575] devtmpfs: initialized
[ 0.144738] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
[ 0.145286] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.145314] RTC time: 16:45:03, date: 03/08/15
[ 0.145355] NET: Registered protocol family 16
[ 0.145473] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.145475] ACPI: bus type PCI registered
[ 0.145658] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.145660] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.150105] PCI: Using configuration type 1 for base access
[ 0.150758] bio: create slab <bio-0> at 0
[ 0.150812] ACPI: Added _OSI(Module Device)
[ 0.150813] ACPI: Added _OSI(Processor Device)
[ 0.150814] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.150815] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152004] ACPI: EC: EC description table is found, configuring boot EC
[ 0.155415] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.172094] ACPI: SSDT 00000000bae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.172394] ACPI: Dynamic OEM Table Load:
[ 0.172395] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.176655] ACPI: SSDT 00000000bae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.176973] ACPI: Dynamic OEM Table Load:
[ 0.176974] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.179575] ACPI: SSDT 00000000bae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.179867] ACPI: Dynamic OEM Table Load:
[ 0.179868] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.184422] ACPI: Interpreter enabled
[ 0.184426] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.184430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.184439] ACPI: (supports S0 S3 S4 S5)
[ 0.184440] ACPI: Using IOAPIC for interrupt routing
[ 0.184455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.190336] ACPI: Power Resource [PUBS] (on)
[ 0.193694] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.193762] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.193827] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.193892] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.193954] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.194006] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.194072] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.194136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.194173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.194245] PCI host bridge to bus 0000:00
[ 0.194248] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.194249] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.194250] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.194252] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.194253] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff]
[ 0.194254] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.194261] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.194321] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.194346] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.194384] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.194393] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.194399] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.194403] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
[ 0.194467] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.194488] pci 0000:00:14.0: reg 10: [mem 0xf3a20000-0xf3a2ffff 64bit]
[ 0.194560] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.194583] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.194617] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.194639] pci 0000:00:16.0: reg 10: [mem 0xf3a35000-0xf3a3500f 64bit]
[ 0.194713] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.194772] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.194789] pci 0000:00:19.0: reg 10: [mem 0xf3a00000-0xf3a1ffff]
[ 0.194797] pci 0000:00:19.0: reg 14: [mem 0xf3a3b000-0xf3a3bfff]
[ 0.194805] pci 0000:00:19.0: reg 18: [io 0x6080-0x609f]
[ 0.194866] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.194883] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.194913] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.194933] pci 0000:00:1a.0: reg 10: [mem 0xf3a3a000-0xf3a3a3ff]
[ 0.195020] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.195047] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.195073] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.195088] pci 0000:00:1b.0: reg 10: [mem 0xf3a30000-0xf3a33fff 64bit]
[ 0.195152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195182] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.195213] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.195339] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195398] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.195525] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.195588] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.195717] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.195748] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.195782] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.195802] pci 0000:00:1d.0: reg 10: [mem 0xf3a39000-0xf3a393ff]
[ 0.195889] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.195914] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.195943] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.196078] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.196095] pci 0000:00:1f.2: reg 10: [io 0x60a8-0x60af]
[ 0.196103] pci 0000:00:1f.2: reg 14: [io 0x60b4-0x60b7]
[ 0.196110] pci 0000:00:1f.2: reg 18: [io 0x60a0-0x60a7]
[ 0.196118] pci 0000:00:1f.2: reg 1c: [io 0x60b0-0x60b3]
[ 0.196125] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
[ 0.196133] pci 0000:00:1f.2: reg 24: [mem 0xf3a38000-0xf3a387ff]
[ 0.196175] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.196217] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.196232] pci 0000:00:1f.3: reg 10: [mem 0xf3a34000-0xf3a340ff 64bit]
[ 0.196252] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.196332] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
[ 0.196339] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.196346] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.196353] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.196359] pci 0000:01:00.0: reg 24: [io 0x5000-0x507f]
[ 0.196364] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.197578] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.197583] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.197588] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.197594] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.197770] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.197789] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.197816] pci 0000:02:00.0: reg 10: [mem 0xf3101000-0xf31010ff]
[ 0.198017] pci 0000:02:00.0: supports D1 D2
[ 0.198019] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198145] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.198171] pci 0000:02:00.3: reg 10: [mem 0xf3100000-0xf31007ff]
[ 0.198373] pci 0000:02:00.3: supports D1 D2
[ 0.198374] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.199699] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.199703] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.199711] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.199935] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.200083] pci 0000:03:00.0: reg 10: [mem 0xf3000000-0xf3001fff 64bit]
[ 0.200802] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.202713] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.202722] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.202810] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.202814] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.202819] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.202827] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.202895] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.202965] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.202966] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.203779] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.203788] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.203824] Found 1 acpi root devices
[ 0.203871] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.204732] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.204783] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.204788] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.204789] vgaarb: loaded
[ 0.204789] vgaarb: bridge control possible 0000:01:00.0
[ 0.204790] vgaarb: no bridge control possible 0000:00:02.0
[ 0.204842] SCSI subsystem initialized
[ 0.204843] ACPI: bus type ATA registered
[ 0.204867] libata version 3.00 loaded.
[ 0.204888] ACPI: bus type USB registered
[ 0.204899] usbcore: registered new interface driver usbfs
[ 0.204904] usbcore: registered new interface driver hub
[ 0.204921] usbcore: registered new device driver usb
[ 0.204956] PCI: Using ACPI for IRQ routing
[ 0.206630] PCI: pci_cache_line_size set to 64 bytes
[ 0.206813] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.206814] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.206815] e820: reserve RAM buffer [mem 0xa59f4000-0xa7ffffff]
[ 0.206816] e820: reserve RAM buffer [mem 0x83e600000-0x83fffffff]
[ 0.206879] NetLabel: Initializing
[ 0.206880] NetLabel: domain hash size = 128
[ 0.206881] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.206887] NetLabel: unlabeled traffic allowed by default
[ 0.206927] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.206931] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.208949] Switching to clocksource hpet
[ 0.212782] pnp: PnP ACPI init
[ 0.212789] ACPI: bus type PNP registered
[ 0.213088] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213090] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.213091] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.213093] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.213094] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.213096] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.213097] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.213098] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.213100] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.213101] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.213102] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.213104] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.213105] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.213107] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.213108] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
[ 0.213110] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.213111] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.213113] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.213177] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.213193] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.213195] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.213196] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.213198] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.213199] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.213201] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.213202] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.213204] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.213205] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.213207] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.213208] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.213210] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213250] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.213257] pnp 00:03: [dma 4]
[ 0.213268] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.213280] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.213307] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.213324] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.213346] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.213367] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.213401] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.213783] pnp: PnP ACPI: found 10 devices
[ 0.213785] ACPI: bus type PNP unregistered
[ 0.220022] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.220190] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.220192] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.220194] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.220196] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.220198] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.220204] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.220207] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.220214] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
[ 0.220219] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.220227] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.220233] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.220245] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.220249] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.220258] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.220263] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.220401] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.220403] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.220404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.220405] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
[ 0.220407] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.220408] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.220409] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.220411] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.220412] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.220413] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf39fffff]
[ 0.220415] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.220416] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
[ 0.220417] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.220419] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
[ 0.220420] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.220450] NET: Registered protocol family 2
[ 0.220764] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.221250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.221359] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.221375] TCP: reno registered
[ 0.221407] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.221496] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.221610] NET: Registered protocol family 1
[ 0.221620] pci 0000:00:02.0: Boot video device
[ 0.221946] PCI: CLS 64 bytes, default 64
[ 0.221993] Unpacking initramfs...
[ 0.611211] Freeing initrd memory: 29444k freed
[ 0.614330] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.614335] software IO TLB [mem 0xa19f4000-0xa59f4000] (64MB) mapped at [ffff8800a19f4000-ffff8800a59f3fff]
[ 0.616811] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.617087] Initialise system trusted keyring
[ 0.617119] audit: initializing netlink socket (disabled)
[ 0.617133] type=2000 audit(1425833103.593:1): initialized
[ 0.637760] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.639467] VFS: Disk quotas dquot_6.5.2
[ 0.639513] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.639777] msgmni has been set to 32768
[ 0.639819] SELinux: Registering netfilter hooks
[ 0.640385] alg: No test for stdrng (krng)
[ 0.640392] NET: Registered protocol family 38
[ 0.640394] Key type asymmetric registered
[ 0.640395] Asymmetric key parser 'x509' registered
[ 0.640396] Asymmetric key parser 'pefile' registered
[ 0.640418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.640444] io scheduler noop registered
[ 0.640445] io scheduler deadline registered
[ 0.640451] io scheduler cfq registered (default)
[ 0.640555] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.640782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.640792] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.640793] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.640886] acpiphp: Slot [1] registered
[ 0.640944] intel_idle: MWAIT substates: 0x21120
[ 0.640945] intel_idle: v0.4 model 0x3A
[ 0.640946] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.641356] ACPI: AC Adapter [AC] (on-line)
[ 0.641418] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.641625] ACPI: Lid Switch [LID]
[ 0.641650] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.641653] ACPI: Sleep Button [SLPB]
[ 0.641695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.641697] ACPI: Power Button [PWRF]
[ 0.641746] ACPI: Requesting acpi_cpufreq
[ 0.644793] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.644795] ACPI: Thermal Zone [THM0] (57 C)
[ 0.644809] GHES: HEST is not enabled!
[ 0.644859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.645229] Non-volatile memory driver v1.3
[ 0.645231] Linux agpgart interface v0.103
[ 0.645756] loop: module loaded
[ 0.645791] ahci 0000:00:1f.2: version 3.0
[ 0.645871] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.645900] ahci: SSS flag set, parallel bus scan disabled
[ 0.645926] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.645929] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 0.645934] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.649796] scsi0 : ahci
[ 0.649860] scsi1 : ahci
[ 0.649905] scsi2 : ahci
[ 0.649947] scsi3 : ahci
[ 0.649997] scsi4 : ahci
[ 0.650032] scsi5 : ahci
[ 0.650054] ata1: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38100 irq 43
[ 0.650057] ata2: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38180 irq 43
[ 0.650058] ata3: DUMMY
[ 0.650058] ata4: DUMMY
[ 0.650060] ata5: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38300 irq 43
[ 0.650061] ata6: DUMMY
[ 0.650122] libphy: Fixed MDIO Bus: probed
[ 0.650175] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.650176] ehci-pci: EHCI PCI platform driver
[ 0.650244] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.650247] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.650283] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.650300] ehci-pci 0000:00:1a.0: debug port 2
[ 0.652434] ACPI: Battery Slot [BAT0] (battery present)
[ 0.654207] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.654220] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a3a000
[ 0.659539] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.659552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.659554] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.659555] usb usb1: Product: EHCI Host Controller
[ 0.659557] usb usb1: Manufacturer: Linux 3.9.5-301.fc19.x86_64 ehci_hcd
[ 0.659558] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.659634] hub 1-0:1.0: USB hub found
[ 0.659637] hub 1-0:1.0: 3 ports detected
[ 0.659764] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.659767] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.659803] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.659816] ehci-pci 0000:00:1d.0: debug port 2
[ 0.663708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.663720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a39000
[ 0.669549] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.669558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.669559] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669560] usb usb2: Product: EHCI Host Controller
[ 0.669562] usb usb2: Manufacturer: Linux 3.9.5-301.fc19.x86_64 ehci_hcd
[ 0.669563] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.669630] hub 2-0:1.0: USB hub found
[ 0.669633] hub 2-0:1.0: 3 ports detected
[ 0.669709] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.669715] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.669774] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.669777] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.669812] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.669900] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.669942] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 0.669982] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.669983] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669984] usb usb3: Product: xHCI Host Controller
[ 0.669986] usb usb3: Manufacturer: Linux 3.9.5-301.fc19.x86_64 xhci_hcd
[ 0.669987] usb usb3: SerialNumber: 0000:00:14.0
[ 0.670044] xHCI xhci_add_endpoint called for root hub
[ 0.670046] xHCI xhci_check_bandwidth called for root hub
[ 0.670059] hub 3-0:1.0: USB hub found
[ 0.670067] hub 3-0:1.0: 4 ports detected
[ 0.670315] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.670348] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.670367] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.670369] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670370] usb usb4: Product: xHCI Host Controller
[ 0.670371] usb usb4: Manufacturer: Linux 3.9.5-301.fc19.x86_64 xhci_hcd
[ 0.670372] usb usb4: SerialNumber: 0000:00:14.0
[ 0.670425] xHCI xhci_add_endpoint called for root hub
[ 0.670426] xHCI xhci_check_bandwidth called for root hub
[ 0.670440] hub 4-0:1.0: USB hub found
[ 0.670449] hub 4-0:1.0: 4 ports detected
[ 0.678577] usbcore: registered new interface driver usbserial
[ 0.678582] usbcore: registered new interface driver usbserial_generic
[ 0.678586] usbserial: USB Serial support registered for generic
[ 0.678607] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.680776] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.680780] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.680832] mousedev: PS/2 mouse device common for all mice
[ 0.680970] rtc_cmos 00:06: RTC can wake from S4
[ 0.681092] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.681128] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.681170] device-mapper: uevent: version 1.0.3
[ 0.681215] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 0.681342] cpuidle: using governor ladder
[ 0.681488] cpuidle: using governor menu
[ 0.681799] EFI Variables Facility v0.08 2004-May-17
[ 0.681807] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.681861] usbcore: registered new interface driver usbhid
[ 0.681862] usbhid: USB HID core driver
[ 0.681877] drop_monitor: Initializing network drop monitor service
[ 0.681934] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.681977] TCP: cubic registered
[ 0.681982] Initializing XFRM netlink socket
[ 0.682059] NET: Registered protocol family 10
[ 0.682164] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.682200] mip6: Mobile IPv6
[ 0.682201] NET: Registered protocol family 17
[ 0.682442] PM: Hibernation image not present or could not be loaded.
[ 0.682443] Loading compiled-in X.509 certificates
[ 0.683145] Loaded X.509 cert 'Fedora kernel signing key: 78fb4a79e920e6faab7a0c9f59d1d38942b01496'
[ 0.683151] registered taskstats version 1
[ 0.684524] Magic number: 7:514:792
[ 0.684647] rtc_cmos 00:06: setting system clock to 2015-03-08 16:45:04 UTC (1425833104)
[ 0.954962] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.956148] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.956155] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.956484] ata1.00: supports DRM functions and may not be fully accessible
[ 0.956574] ata1.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
[ 0.956592] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.961969] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.961983] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.961987] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.962286] ata1.00: supports DRM functions and may not be fully accessible
[ 0.966658] ata1.00: configured for UDMA/133
[ 0.966865] scsi 0:0:0:0: Direct-Access ATA Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
[ 0.967029] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.967032] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.967035] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.967281] sd 0:0:0:0: [sda] Write Protect is off
[ 0.967283] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.967379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.968061] sda: sda1 sda2 sda3
[ 0.968898] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.076451] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.076457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.076743] hub 1-1:1.0: USB hub found
[ 1.076947] hub 1-1:1.0: 6 ports detected
[ 1.180208] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.272355] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.275357] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.275613] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.276784] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C0, SB01, max UDMA/133
[ 1.279515] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.279774] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.280945] ata2.00: configured for UDMA/133
[ 1.283157] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 SB01 PQ: 0 ANSI: 5
[ 1.285371] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.285375] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.285555] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.285658] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.294696] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.294700] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.294991] hub 2-1:1.0: USB hub found
[ 1.295067] hub 2-1:1.0: 8 ports detected
[ 1.398465] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 1.471839] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 1.471843] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.510701] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.590715] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.591552] Freeing unused kernel memory: 1352k freed
[ 1.591703] Write protecting the kernel read-only data: 12288k
[ 1.594694] Freeing unused kernel memory: 1708k freed
[ 1.597128] Freeing unused kernel memory: 1332k freed
[ 1.599740] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 1.599810] systemd[1]: Running in initial RAM disk.
[ 1.599878] systemd[1]: No hostname configured.
[ 1.599882] systemd[1]: Set hostname to <localhost>.
[ 1.599947] systemd[1]: Initializing machine ID from random generator.
[ 1.603767] systemd[1]: Starting Timers.
[ 1.603782] systemd[1]: Reached target Timers.
[ 1.603833] systemd[1]: Starting udev Kernel Socket.
[ 1.603858] systemd[1]: Listening on udev Kernel Socket.
[ 1.603900] systemd[1]: Starting udev Control Socket.
[ 1.603929] systemd[1]: Listening on udev Control Socket.
[ 1.603941] systemd[1]: Starting Journal Socket.
[ 1.603974] systemd[1]: Listening on Journal Socket.
[ 1.604090] systemd[1]: Starting dracut cmdline hook...
[ 1.604397] systemd[1]: Starting Sockets.
[ 1.604410] systemd[1]: Reached target Sockets.
[ 1.604423] systemd[1]: Starting Journal Service...
[ 1.604746] systemd[1]: Started Journal Service.
[ 1.604767] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.605129] systemd[1]: Started Load Kernel Modules.
[ 1.605148] systemd[1]: Starting Encrypted Volumes.
[ 1.605166] systemd[1]: Reached target Encrypted Volumes.
[ 1.605234] systemd[1]: Started Device-Mapper Multipath Device Controller.
[ 1.605248] systemd[1]: Starting Swap.
[ 1.605264] systemd[1]: Reached target Swap.
[ 1.605278] systemd[1]: Starting Local File Systems.
[ 1.605295] systemd[1]: Reached target Local File Systems.
[ 1.615749] tsc: Refined TSC clocksource calibration: 2793.661 MHz
[ 1.615754] Switching to clocksource tsc
[ 1.616838] usb 4-2: New USB device found, idVendor=0951, idProduct=1666
[ 1.616841] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.616843] usb 4-2: