Release Date: October 24, 2013
Firmware Version Required : 10.3.80
[ATF JTAG]
* Added New BIG BOOT FILES for all Lumia Phones
* Added Lumia 1020 BOOT REPAIR Support
[Infineon]
* Added Read Flash File Option for Infineon XG110 FBUS Phones
--> This will read MCU, PPM and CNT in Regular FLS Format (Including VPL)
--> Currently very useful for Nokia 107 RM-961
* Added Read Flash File Custom Address and Full Flash
* Added Dead Phone Read PM Area via Recover PMM Area (PM File)
[BB5]
* Fixed UDA Flashing on Latest Belle Releases
[General Updates]
* Complete Product Listing in Nokia.ini (as of October 24, 2013)
[Bug Fixes]
* Fixed Infineon XG110 FBUS Flashing "Hang" on Factory Reset
* Fixed Infineon XG110 FBUS PMM and CNT Quick Erase
*******************************
Advance Turbo Flasher v10.20
*******************************
Release Date: September 24, 2013
Firmware Version Required : 10.3.80
[ATF JTAG]
New ATF JTAG Exe - v.1.0.2 build 2269
* Added Lumia 900 RM-808 and RM-823 Unlock via Read Codes (PIN and PUK)
* Added Lumia 900 RM-808 and RM-823 Automatic Counter Reset (PIN and PUK)
* Added Lumia 925T RM-855 Boot Repair (Quick Fix, Full BOOT, BIG BOOT)
* Added Lumia 625 RM-941 Boot Repair (Quick Fix, Full BOOT, BIG BOOT)
* Added Lumia 625 RM-943 Boot Repair (Quick Fix, Full BOOT, BIG BOOT)
* Added Support for new BOOT versions on all Lumia WP8 Phones (3xxx.xxxx.xxxx.xxxx)
[ATF Plus -> eMMC Tool]
* Added Support for eMMC Adapter (Direct Connection)
* Added Support for Manual VCCIO Selection (1.80v, 2.80v and 3.30v)
* Added Support for Manual Speed Selection (15 Mhz, 7.5Mhz and 5.0 Mhz)
* Improved eMMC Reset and Detection
* Added Auto-Verify for BOOT1 and BOOT2 Writes
[WP8]
* Fixed WP8 SimLock Status and Network Provider Reading
* Added Full Variant Listing as of September 24, 2013
[WP7]
* Added Full Variant Listing as of September 24, 2013
[Infineon]
* Added New RM-841, RM-948, RM-949, RM-950, RM-952, RM-953 and RM-954 Loaders
[General Updates]
* Complete Product Listing in Nokia.ini (as of September 24, 2013)
*******************************
Advance Turbo Flasher v10.10
*******************************
Release Date: August 31, 2013
Firmware Version Required : 10.3.80
[New ATF Box Firmware]
LogiCore 10.3.80
* Fixed SD Card Bruteforce Communication Bug
* Increased JTAG Activation Time Out
* Improved Toshiba eMMC Handling for ATF Chrome Boxes
[ATF JTAG]
New ATF JTAG Exe - v.1.0.1 build 1453
* Added Cherry Mobile Flare S100 Factory Restore JBv45
- Can be used to repair "Dead Boot" Phones
- Can be used on totally blank eMMC or new eMMC replacements
* Uploaded new BIG BOOT Files for Lumia 820 and 920
- Can be used for "USB Flashing Error" after BOOT REPAIR
[WP7]
* Added Support for flashing Original Nokia Factory OSBL Files (NO TP QCOM OSBL)
[BB5]
* Added Firmware Check notification when flashing phones via FBUS or USB
[Infineon XG223]
* Added LifeTimer Read/Write/Reset for new XG223 phones (501, 309, 308...)
* Improved XG618 Buscheck Detection
[General Updates]
* Added "Restore EEPROM" button in Box Tools tab
- You can use this button instead of using MPROG or FT_PROG
* Complete Product Listing in Nokia.ini (as of August-31-2013)
*******************************
Advance Turbo Flasher v10.00
*******************************
Release Date: July 25, 2013
Firmware Version Required : 10.3.70
ATF JTAG Official Launch (Requires 1 time Activation)
http://www.advance-box.com/jtag/
[ATF JTAG]
ATF JTAG Initial Phone Support List (All Lumia WP8 Released Phones):
Lumia 928 RM-860
Lumia 925 RM-910
Lumia 925 RM-893
Lumia 925 RM-892
Lumia 920T RM-867
Lumia 920 RM-822
Lumia 920 RM-821
Lumia 920 RM-820
Lumia 820 RM-826
Lumia 820 RM-825
Lumia 820 RM-824
Lumia 720T RM-887
Lumia 720 RM-885
Lumia 620 RM-846
Lumia 521 RM-917
Lumia 520T RM-913
Lumia 520 RM-915
Lumia 520 RM-914
Main ATF JTAG Software Features:
* Cheap 1 time Activation Cost with NO additional Hardware Purchase needed
* Super Easy Nokia WP8 JTAG JIGS Already Available
* Super Easy Interface... Simple and Effective
* Clear JTAG Pinouts Viewer
* Fast JTAG Connection (480 Mbps USB via ATF Box)
* Fully Customizable Software GUI Language (Create your own Language File)
* Repair any "DEAD BOOT" Lumia WP8 Phone
* "QUICK FIX" Option - For Dead phones via Flashing
* "FULL BOOT" Option - For Dead phones via eMMC Boot Corruption
[eMMC Tool 2.0 Lite]
Introducing eMMC Tool 2.0 Lite under "ATF Plus"
* eMMC Read Speed increased 800% Faster
* Supports Samsung Exynos 4 CPU with just 4 wires to solder (LIVE PHONE ONLY for NOW)
* Supports Snapdragon CPU with just 4 wires to solder
* Supports Reading and Writing to USER AREA, BOOT1, BOOT2, RPMB, GP1, GP2, GP3 or GP4 Partition
* NON Encrypted READ/WRITE Functions
[New ATF Box Firmware]
Introducing LogiCore 10.3.70
* Enhanced eMMC Reading Speeds up to 1.85 MBPS @ 15.00 Mhz
* 1 GB Dump = 7-8 minutes
* TP Unlocks WP7 (710 and 800) in less than 30 seconds for any eMMC Brand
* Fixed Toshiba and new Hynix ack delay issues
* Improved SD Card BF Speed
* Enabled SPI Flash Direct Programming
* Improved FBUS DDR + 2TX Speed now up to 18.00 Mhz
[Infineon XG213]
* Automatically Reads RPL in Plain Binary Format on every Flash Boot
* Automatically Reads PM in Plain Binary Format on every Flash Boot
* Automatically Reads Security Code on every Flash Boot (No need Local Mode)
* Added New Loaders for all released XG213 Models
[WP8]
* Improved Flashing to accommodate SUPER big Verizon Flash Files
* Added Latest Variant Listing as of July 25, 2013
[WP7]
* Greatly Improved TP Unlock Speed and Patch Firmware Checking
* Fixed Problem on Toshiba and new Hynix Unlock Problem on ATF Chrome Box
* Added Latest Variant Listing as of July 25, 2013
[BB5]
* Removed Phone Firmware Checking if Selected in Settings the option:
"Skip Firmware Version Checking on BB5 Phones before Flashing"
[DCT4]
* Fixed DCT4 RPL via Server Problem "You do not have free credits..."
What More to Expect ???
1. Separate EXE for eMMC Tool 2.0 to be released soon...
2. Add other phone brands for ATF JTAG Support ?
*******************************
Advance Turbo Flasher v9.90
*******************************
Release Date: May 28, 2013
Firmware Version Required : 10.3.50
XGOLD 618 Support Added
Supported Phones:
Asha 301/3018 RM-839 - Fully Tested
Asha 301/3018 RM-840 - Fully Tested
Asha 301/3018 RM-841 - Not Yet Released
Other Future XG618 Phones
Supported Operations:
Normal Firmware Flashing
Downgrade Firmware Flashing
Backup RPL
Read/Write PM and PP
*** Warning: DO NOT CROSS FLASH these phones. Always Flash with correct RM-XXX ***
What's New ?
* Improved BB5 Firmware Version Check via Flash Mode
* Skip Firmware Version Check Option in Settings (If you want ATF to skip Firmware Version Check via Flash Mode)
* New Reseller List Handler (No More Disappearing Resellers)
* New WinUSB Driver for Lumia and New ASHA Phones (Old Drivers Removed)
* Improved WinUSB Delphi Wrapper
* 400% Speed Increase when Dumping eMMC Toshiba/New Hynix via TP
Bug Fixes:
* Fixed Read Firmware Information for Manually Loaded Flash Files (NON VPL)
* Fixed bug that does not automatically select USB connection on ATF Startup
* Fixed bug on Scan Phone that makes some new Rapuv2 phones reboot and fails to read Simlock Data (Nokia 500, 311 etc)
Other Stuff
* Complete Product Listing in Nokia.ini (as of May-28-2013)
* Lumia 925
* Lumia 928
* Asha 501
* Asha 301
Known Limitations:
* Firmware Version Check via Flash Mode does not support ADL Flashing
For this Update We give Special Thanks To:
Angel - For Reporting Bugs + Extensive Final Testing
WAJID - For Beta Testing
el-polaco - For Reporting Bugs
sebagsm - For Reporting Bugs
*******************************
Advance Turbo Flasher v9.80
*******************************
Release Date: April 30, 2013
Firmware Version Required : 10.3.50
Lumia Windows Phone 8.0 Dead Boot Repair via TP
Supported Phones:
Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887
Supported Partition Repairs:
M.B.R. (Master Boot Record)
G.P.T. (GUID Partition Table)
SBL1
SBL2
SBL3
UEFI
RPM
TZ
WINSECAPP
Custom Read/Write eMMC Blocks also supported. The password is still
"password" in HEX format.
(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)
Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T
What's New ?
* Lumia Windows Phone 8.0 Dead Boot Repair via TP
* ATF FiRE Server Capable EXE (Flash Files/Links are still uploading)
Bug Fixes:
* Fixed Lumia Custom eMMC Read/Write Bug on new Hynix eMMC
* Fixed SD Card Custom Password Masking
Other Stuff
* Complete Product Listing in Nokia.ini (as of April-30-2013)
For this Update I give Special Thanks To:
My Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.
*******************************
Advance Turbo Flasher v9.70
*******************************
Release Date: March 25, 2013
Firmware Version Required : 10.3.50
ATF Box New Firmware LogiCore 10.3.50 Official Release
--> Support ATF JAM (JTAG Access Module)
--> Support ATF SAM (Samsung Access Module)
More info about ATF JAM and ATF SAM will be released very soon!
What's New ?
* Added "Create ENO FPSX" button in 'Read Flash' tab which will allow
you to extract ENO Blocks from FLASH DUMPS made by ATF Software. The
resulting ENO File will be in Plain FPSX format and can be used on
phones which have the same ROOT_KEY_HASH as the original FLASH DUMP.
Normally, Dumping the first 16 MB of the Flash Chip is enough to
extract the ENO Blocks. If the ENO cannot be found, then try 32 MB.
* SD Card Password BF Unlock now supports Customized MASK Files so
you can make your own MASK files using any Unicode 16-Bit (2 bytes)
characters. This will allow you to BruteForce NON-ENGLISH/LATIN
characters. More info about Unicode here:
http://en.wikipedia.org/wiki/List_of_Unicode_characters
You can check our support forum for a STEP-BY-STEP instruction on
how to create and use your own MASK Files.
* Updated Lumia 505 RM-923 Repair Boot Files
* Uploaded Lumia 505 RM-923 Test Point Pictures
Bug Fixes:
* Fixed Lumia 505 RM-923 detection as Windows 7.8 Phone
* Fixed Lumia Custom eMMC Read/Write file handler
* Fixed Lumia eMMC Direct Drive Number Detection
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of March-25-2013)
* Complete Product Listing in Nokia.ini (as of March-25-2013)
For this Update we give Special Thanks To:
dj kidd (Mexico) for Sending Lumia 505 Phone
WAJID (Dubai) for Beta Testing
Angel for reporting Bugs
*******************************
Advance Turbo Flasher v9.60
*******************************
Release Date: February 28, 2013
Firmware Version Required : 10.3.30 or 10.3.50
"Lumia TP Updates"
What's New?
* Lumia 510 (RM-889, RM-898) Dead Boot Repair Supported
* Lumia 505 (RM-923) Dead Boot Repair Supported
* Lumia 510 TP Pictures Added
* Lumia 900 "Unlocked Bootloader" added (Qualcomm OSBL)
Something for Developers (Requires Password)
* Lumia eMMC RAW Read/Write via TP "CUSTOM Read or WRITE" Option
* Supported Phones: Lumia 505, 510, 610, 610C, 710, 800, 800C and 900
* Password is 70617373776F7264
Small Bug Fixes
* Skipped checking SRP and iOS Service Cost during Phone Authorize
* Fixed Simlock Recovery Bug on phones with APE NAND Flash Chips
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Feb-28-2013)
* Complete Product Listing in Nokia.ini (as of Feb-28-2013)
******************************************
* LogiCore 10.3.50 OPEN BETA COMING SOON *
******************************************
In preparation for the Release of LogiCore 10.3.50, we are looking for
ATF Users who are willing to participate in testing the new features
of this Firmware.
1. Beta Testers needed - To test the Stability of LogiCore 10.3.50 Beta
2. Beta Testers needed - Who have soldering skills and familiar with JTAG
*******************************
Advance Turbo Flasher v9.50
*******************************
Release Date: January 22, 2013
Firmware Version Required : 10.3.30
"Initial 2013 Update"
What's New?
* Infineon XG110 FBUS read HASH for LBF (Stand Alone)
* Lumia eMMC Direct Now supports Newer WP_OS 7.8 Partition Direct Write (For QCOM Phones)
* Added Vista/Win7/Win8 32/64-bit "Run-As-Admin" Manifest (No need to right-click exe)
* Latest BB5 Flash Loaders Package 12.46.000.1
* Latest Nokia_Connectivity_Cable_Driver_7.1.101.0
* Latest WinUSB 32/64 bit Drivers
What was Changed?
* Improved Booting Speed on XG110 FBUS Phones
* Improved Application SKIN Handling
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Jan-22-2013)
* Complete Product Listing in Nokia.ini (as of Jan-22-2013)
A Friendly Reminder
############################################################################
## #
## YOU HAVE 1 MORE WEEK TO DOWNLOAD FLASH FILES VIA NAVIFIRM #
## #
############################################################################
*******************************
Advance Turbo Flasher v9.40
*******************************
Release Date: December 20, 2012
Firmware Version Required : 10.3.30
"A Jingle BELLE OS Update"
Introducing ATF Super CMLA Key Repair and Direct PM 308 Security Block Write Back to SL3 Phones!
(New Hashes Requires ATF Network Phone Authorize)
Now you can Write Back your Original PM 308 Phone Backups back to the Phone!
--> The Super Dongle Key will Remain 100% Original
--> The CMLA Key will Remain 100% Original
But if you don't have PM 308 backup, then you can use Repair CMLA Key to allow
your phone to run the Latest Symbian Belle OS Releases. This Second option allows
you to to write CMLA Keys to any SL3 Phone even without PM 308 backup.
QUICK Q/A INFO:
Question: What is CMLA ?
Answer : It is basically some keys to be used for Digital Rights Managment. (http://www.cm-la.com/)
Q: Why do we need CMLA Keys?
A: CMLA is checked and used when running Belle OS on majority of the newest SL3 Smart Phones.
Q: Do all phones need CMLA Keys?
A: No, but Majority Needs it.
Q: How do I know that my Phone needs CMLA Key Repair?
A: If your phone cannot start Belle OS and is just showing your scrolling Dots o o o o o o ....
Q: If I don't have ATF Box, how can I repair CMLA Keys?
A: Buy Original RPL, you will see CMLA_KEY inside... or just Buy Preactivated ATF Nitro Box.
Q: Is CMLA Repair using ATF Free?
A: Yes, but you need to Authorize Phone first via the ATF Network if your Phone is "New HASH".
Q: What is PM 308 Security Write Back Feature?
A: It is a feature that allows you to WRITE BACK PM 308 to SL3 Phones.
Q: Can I write back PM 308 from Phone A into another Phone B?
A: No, the PM 308 Backup must be from the same phone.
Q: I don't have PM 308 Backup, what can I do now?
A: Use Repair Super Dongle and Repair CMLA Keys instead.
Q: I cannot find this new feature in ATF 9.40, how do I use it?
A: It is completely integrated into the ATF Software, so just use "Write PM" function in ATF Software.
Q: Do I need to AUthorize Phone First before I can use this new feature?
A: Yes, the phone needs to be Authorized by The ATF Network if your phone is "New HASH".
Other Updates:
- Added RM-862, RM-863, RM-864, RM-872 and RM-873 for Infineon/Intel XG213 Decrypt PM 120 HASHES
- Added New Nokia Products in Nokia.ini
- Fixed Minor BB5 USB Booting from 9.30
*******************************
Advance Turbo Flasher v9.30
*******************************
Release Date: December 10, 2012
Firmware Version Required : 10.3.30
[MAJOR UPDATE]
Introducing The Lumia Windows Phone 7.x eMMC Direct Module
Main Qualcomm OSBL Functions:
- Direct Unlock Lumia 710 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)
- Direct Unlock Lumia 800 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)
Other Qualcomm OSBL Functions:
- Direct Write OSBL original ESCO File Format via Qualcomm OSBL
- Direct Write Windows 7.x OS (boot.img) ESCO File Format via Qualcomm OSBL
- Direct Read/Write all Partitions in the Master Boot Record
- Backup/Restore PMM, Simlocks, Certificates and RPL
- Change Product Code
- Repair Corrupted AMSS Problems after TP Boot Repair
- Direct Write Custom Firmware to WP_OS Partition
All eMMC Direct Functions requires Qualcomm OSBL.
If you have a Lumia 710 with DLOAD OSBL, you can flash the Phone via USB to get Qualcomm OSBL.
If you have a Lumia 800 with DLOAD OSBL, you need to use TP Method and write QCOM OSBL via TP.
If you have Lumia Lumia 510, 610 or 900, then you cannot use eMMC Direct Module on them.
**********************************************************************************************
*************************** IMPORTANT INFORMATION **********************************
**********************************************************************************************
- You need "Administrator Rights" if you want to use the eMMC Direct Module.
Easiest way to get Administrator Rights is to go to C:\AdvanceBox Turbo Flasher\
then RIGHT-CLICK Mouse on "AdvanceBox.exe", then select:
--------> 'Run as administrator'
You need to do this everytime you want to use the eMMC Direct Module
**********************************************************************************************
**********************************************************************************************
**********************************************************************************************
*******************************
Advance Turbo Flasher v9.20
*******************************
Release Date: November 26, 2012
Firmware Version Required : 10.3.30
[MAJOR UPDATE]
Introducing The Lumia Windows Phone 8 Module v1.0
Current Windows 8 Phones:
Lumia 920 - RM-820, RM-821
Lumia 810 - RM-878
Lumia 820 - RM-824, RM-825
Lumia 822 - RM-845
Full Product Firmware Flashing via USB Connection with valid FFU Signed Images
Supports Live Phone, DEAD Phone and RED Phone* Flashing
Full Product Info Reading including Lock Status and Original Provisioner Settings
Variant Information displayed during Live Phone Scan
Phone Type will now be Automatically Selected after Live Phone Scan
Ability to Switch from NCSD Mode to Test Mode aka FBUS MODE
--> In FBUS MODE, Self-Tests and Some Scan Phone Items are available.
TIPS for Working with Windows 8 Phones:
1. Holding the POWER BUTTON for 12 Seconds will force a phone reboot to Normal Mode
2. Holding the POWER BUTTON and VOLUME DOWN BUTTON until a short vibration will force phone into FLASH MODE
3. Always make sure you have more than 50% Battery Power before you flash the Phone.
4. After the phone is flashed, ALL USER DATA is ERASED! Make sure to Backup Phone Data before flashing.
[Windows Phone 7.x]
Variant Information now displayed during Live Phone Scan
-->This is useful for knowing Original Provisioner of the Phone aka NETWORK LOCK
Phone Type will now be Automatically Selected after Live Phone Scan
--> Correct Flash Files will also be selected if available
[Infineon XG213]
Decrypt PM 120 Hashes for LBF of XG213 Based Infineon Phones
Show Infineon XG213 Keypress and FBUS Counters
Reset Lock Counters for XG213
XG213 Send 15-digit or 20-digit Code via FBUS Frame
LBF Files SKIP SAVE if 20-digit or Phone does not accept NCK Input
Automatically Backup XG213 Certificates in Plain RPL Format during Prior to Flashing
XG213 Write RPL Certificates
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
Fixed "Quick/Shortcut Erase" Bug when flashing "Contact Service" Phones
[Infineon XG223]
Fixed XG223 RPL Certificate Backup Sizes (Asha 308, 3080, 309 and 3090)
Enabled XG223 Write RPL and Custom Fash Chip Erase Address
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
[General Updates]
New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8
New BB5 Flash Loaders 12.33.000.3
New WinUSB Lumia Drivers (Supports Windows 8)
New Nokia Connectivity Cable Driver 7.1.92.0 (Supports All Current Nokia Phones)
[User Requests]
Angel - Product Type (RM-XXX) now saved in PM and PP Backup Filenames
RED Phone - Phone is showing a dark RED Tint with NOKIA Logo Only
*******************************
Advance Turbo Flasher v9.10
*******************************
Release Date: September 14, 2012
Firmware Version Required : 10.3.30
Introducing The ATF Lumia Test Point Module v1.0
* Repair DEAD BOOT Lumia 800 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumia 710 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumias Killed by other methods
* Direct Write of SEC_BOOT, OSBL, QBOOT and AMSS Images
* Direct Write of QUALCOMM Unlocked OSBL to Lumia 800
* SP Unlock ANY Lumia 710 and 800 version and OSBL Type (QCOM or DLOAD)
* Cross-Flash 800C and 610C into 800 and 610 Variants to accept non RUIM Cards
* Supports Lumia 610, 610C, 710, 800, 800C and 900 (First Generation Lumias)
Introducing The ATF iOS Service Request Module
* Only Available to ATF Network Users
* Uses ATF iCredits
* Can Request and Retrieve iDevice IMEI Network Information with 1 CLICK
* Can Request Network SIM Unlock for Specific Networks
* Can Request IMEI Un-Barring Request for Specific Networks
Introducing The New LogiCore 10.3.30 Firmware for ATF Chrome, ATF Lightning and Nitro Boxes
* Added Support for Lumia Test Point Connections
IMPORTANT INFORMATION:
For SIMLOCK Recovery Level 3, This New Update 9.10 will NOT be able to
use your old SL3 BF Credits for SRP File Uploading. It will be using
the New Simlock Recovery Credits (SRP Credits).
If you want to continue using your SL3 BF Credits to upload SRP Files,
then you are given 2 weeks to use it with the older ATF exe (9.02 and
lower). Starting October 2012, we will NO LONGER accept SRP File Uploads
using SL3 BF Credits.
User Requested Change Log:
*Show Variant Certificate Information during RPL Backup
#Angel
*Skip Flash File Checksum Verification in Expert Settings added
#Angel
*Fixed Generation Tab Switching (Infineon to DCT4)
#Pasha T.
*******************************
Advance Turbo Flasher v9.00
*******************************
Release Date: August 16, 2012
Introducing The ATF Simlock Recovery Module v1.0
Introduction:
In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.
Here is a Short Description about the three Simlock Recovery Levels:
Recovery Level 1
* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* Super Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 2
* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 3
* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware
IMPORTANT INFORMATION:
1. Level 1 Recovered Simlocks are NOT VERFIED to be Working (NOT GUARANTEED)
2. Level 2 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
3. Level 3 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
Summary:
If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.
Box Firmware Update:
New ATF Firmware LogiCore 10.3.15 for ATF Chrome, ATF Lightning and ATF Nitro Boxes
Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID
* New option in Settings "Select USB Connection by Default when ATF Software Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from NaviFirm etc...
* Other small tweaks which I already forgot to mention...
*******************************
Advance Turbo Flasher v8.90
*******************************
Release Date: June 25, 2012
Introducing the Official ATF Nitro SD Reader.
The ATF Nitro SD Reader enables Micro SD Card Brute-Force and
Factory Formatting Functionalities for ALL ATF Boxes without
Micro SD Card Ports. It also works on the Original ATF Chrome Box.
Features:
Ultra-Fast Communication Speed (upto 25 Mhz for Hi-Speed Capable Cards).
Fastest Brute-Force Speed with Intelligent Card Speed Threshold Adjustment.
First and ONLY Device in the GSM Industry that can retrieve SD Card Passwords without FORMAT.
Compatibility:
Compatible with ATF Lightning, ATF Nitro and ATF Chrome Boxes with LogiCore 10.3.12 or Higher.
Compatible with ALL Micro SD Card Brands that conform or don't conform to the SD Standards.
Compatible with ALL Micro SD Card Capacities (Tested upto 128 GigaBytes).
Flashing Updates:
--> Added Support for Newer Mass Memory Content Files
--> Only Scans Existing VALID Directories for Flash Files
--> Skips MEEGO/MAEMO Flash File Intensive Pre-Parsing
Other Updates
--> Custom PM Erase Section and Sub Field (For Expert Use Only)
--> Support for ATF Nitro SD Card Reader for SD Card BF and Factory Formatting
--> Added New Phones inside Nokia.ini
Bug Fixes:
--> Fixed AUTO-ADL Flashing Selection on LIVE RAPIDO Phones
--> Fixed Incorrect SP Lock/Open Status on One Specific Service Provider
--> Fixed USB "ULTRA SLOW" Mass Memory Flashing for Built-In EMMC Chip
--> Fixed Some Wrong Entries inside Nokia.ini
*******************************
Advance Turbo Flasher v8.80
*******************************
Release Date: May 31, 2012
Flashing Updates:
--> Lumia Flashing Optimization for 610, 710, 800 and 900 Flash Files
--> BB5 USB Flashing Default Timeout Corrections on RAPUYAMA Booting
--> BB5 DUAL CPU New Protocol Flashing (N95, N95-8GB, N90 Etc) Speedup
Driver Updates:
--> New ATF Box FTDI Drivers 2.08.24
--> Nokia Connectivity Driver v7.1.78.0
--> Lumia New WinUSB Drivers (32-Bit and 64-Bit)
Bug Fixes:
--> DCT4 ASIC 2-5-6-7 Direct Unlocking Fixed for Custom Profile Bits
*******************************
Advance Turbo Flasher v8.70
*******************************
Release Date: April 25, 2012
Flashing Updates:
--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB, N95, E90)
Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:
DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR
Other Updates:
--> New Products Added to Nokia.ini
Bugs Killed in this Update:
--> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2 Computers
--> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
--> Fixed Battery Value 0 Error When Flashing via USB
--> Fixed USB Booting Problem Delay on FUR
--> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
--> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
--> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
--> Adjusted Infineon USB Flashing to exit properly during a Flash Error
Special Thanks Goes To:
ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL <-- USB Scan Phone Fix Beta Tester
Some Clarifications:
1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.
2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.
3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like 5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to Format
Drive E:... That is it!
*******************************
Advance Turbo Flasher v8.60
*******************************
Release Date: March 29, 2012
ATF Box New Firmware LogiCore 10.3.12 Official Release
--> Fixes SD Card Slot Issues on ATF Big Chrome Boxes
--> Enables the use of ATF SD Card Cable Accessory for ATF Lightning and Nitro Boxes
--> More Stable FBUS Flashing for RAP3Gv30 Phones
--> 13% Speed Increase in Nitro FBUS Flashing
--> 5% Speed Increase in USB Flashing (BB5, Infineon, MAEMO and MEEGO)
ATF New Driver for New Firmware
--> New More Stable FTDI Driver Set for better Operation when used with other GSM Boxes
Rapido "Boom Boom Pow" Update
--> (Boom) First in the World RAPIDO Full RPL Certificates (NPC, HWC, CCC and R&D) Backup via USB Cable Only
--> (Boom) First in the World RAPIDO Full Flash Chip Reading via USB Cable Only
--> (Pow ) RAPIDO Phone Authorize using ATF Network via USB Cable Only*
ATF BB5 Software Enhancements:
--> BUSCheck Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5 and Infineon Phones**
--> Backup RPL Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5**
--> Write RPL via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Write RPL via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Permanent Memory Area (PM) is now Initialized Before Writing
--> Upto 7 Flash Files can now be displayed with Scrolling Down the Flash File List
--> VPL Details are now Displayed in the Main Log Window
--> New button "Check" can now be used to determine whether your Downloaded Flash files are corrupted or not
--> Added Force 64K CNT Page is now Available in both FBUS and USB Connections
--> Original SX4 Server is now updated and fixed to v1.50 Protocol
--> Software Logs for USB Flashing Phone #2 is now Saved
--> Software Logs for SD BF is now Saved
--> New Feature Decrypt PM 308 will decrypt all PM 308 blocks and save it into a file
Micro SD Card Brute Force Module Update:
--> Speed Cap for SD Card Bruteforce is Now Removed (Now you can BF with MAXIMUM SD CARD SPEED***)
--> Fixed Bug on Detecting Lock Status of some "non standard" Cards
--> Enabled Option to use ATF SD Card Cable
General Software Bug Fixes:
--> Enable Logging Option in Settings --> General Settings is now Enabled
--> Fixed Bug of UI Crashing when Flash File List is double-clicked
--> Super Dongle Keys are now Checked Before getting access to use the Original SX-4 Server
--> Enabled WinUSB Driver detection and installation upon Program Start-Up
Other Updates:
--> Updated New Phone Models inside Nokia.ini
Notes:
* ATF Network Activation is Required for Authorizing RAPIDO Phones via USB Connection
** Single CPU means that the BB5 Phone does not have a separate APE CPU.
Examples of Dual CPU Phones: N95-8GB, 6630, N90, E90
Rap3Gv3 Phones are not supported for USB Buscheck as well (5130c, 3110c, 7210c, 6300c)
*** SD Card BF Speed Depends on the Actual SD Card. Speeds may vary
from 45 passwords per second to 25,000 passwords per second.
*******************************
Advance Turbo Flasher v8.50
*******************************
Release Date: February 27, 2012
Windows Phone Lumia Flashing Engine Fully Supported
--> FULL FLash Lumia 800, 800.2, 710, 710.1, 610 and other upcoming Windows Phone Devices
--> Firmware Downgrade supported for ALL Lumia Products
--> Partial Flashing Supported for ALL Lumia Products (Skip User Area Erase, Skip WPOS, Skip OSBL etc...)
--> Supports Dead and Alive Phone
--> Can Scan Live Phone
--> Cross-Flashing Supported for Products with the same Roothash (710 <--> 710.1 or 800 <--> 800.2)
--> Boot OSBL via NORMAL MODE Fully Implemented (No need to power off phone)
--> No need to press the VOLUME UP Button for Lumia 710 and Lumia 710.1
--> If Factory Reset is Checked, USER AREA will be COMPLETELY Erased
micro SD Card Password Bruteforce Now Implemented
--> Customizable Character Sets Available (small caps only, digits only etc)
--> Supports all Types of micro SD Card from 32MB upto 128GB
--> Customizable Min and Max Length of Password Mask
--> Pause/Resume Supported
--> Automatically Saves RESUME File every 500 Passwords
micro SD Card Total Erase (Low Level Erase)
--> Supports all Types of micro SD Card from 32MB upto 128GB
Bug Fixes:
1. Fixed GUI Hang when FBUS Simlock Backup Fails at the Start of Flashing.
2. Fixed FBUS Booting when receiving receiving incomplete BB5 Boot Code.
Other Updates:
1. Added Complete New Product Listing Inside Nokia.ini
2. Removed iTablets Legacy Flasher (iTablets and MEego are Now Fully Inside BB5 Tab)
3. Improved BB5 Product Scanning after a Complete Flash
4. Updated Flash Loaders to stable 011.048.00 Set
Driver Info for Lumia Phones:
Drivers for Lumia (Nokia Mode) and Lumia (Zune Mode) can be found here:
C:\AdvanceBox Turbo Flasher\Driver\Lumia Phone Drivers\
C:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\
*******************************
Advance Turbo Flasher v8.00
*******************************
Release Date: November 25, 2011
HARMATTAN (MEEGO) Flashing Engine Fully Supported
--> FULL Flash N9-00, N950 and other upcoming MEEGO Devices
--> Flash EMMC (Mass Memory)
--> Secure User Data Erase (Removes Phone User Lock and Security Settings)
--> Supports Cold Flashing via "Skip ADL Chk" (Use only for non-booting Devices)
Known Limitations about MEEGO HARMATTAN Phones (N9-00 and N950)
--> Entire PM area is Write Protected... You can Read, but you cannot Write back anything
--> Security Code which is Read by ATF Software (PM 308,5) is NOT the same as the PHONE LOCK Code
--> When Phone goes to TEST MODE after flashing, it is Normal for ATF to get an ERROR while
reading IMEI and Simlocks on the First Read Attempt.
--> It is not Possible to Downgrade the Firmwares on these phones. So make sure that
your required Language Pack Exist on the Highest Firmware Version before
attempting to Upgrage your phone.
Bug Fixes:
1. FORCE Broadcom into TEST MODE is NO LONGER NEEDED!
--> NORMAL MODE Decrypt PM 120 NOW FIXED
--> NORMAL MODE Scan Phone Hang NOW FIXED
2. Automatically Selects "Backup RPL" before Phone is Authorized via USB Connection
3. Time and Date Format for saving PM and RPL files FIXED
4. ATF Support Site Login and ATF Network Login Delays FIXED
5. Improved BB5 ENO Flashing for USB ADL (Rapido Phones)
6. Re-Enabled SL3 to SL2 Downgrade Unlock for OLD HASH RAPIDO Phones
*******************************
Advance Turbo Flasher v7.90
*******************************
Release Date: November 4, 2011
BB5 Broadcom Independence Loader (First In The World)
--> Decrypt PM 120 HASHES for ALL Broadcom BB5 Phones
--> Bruteforce Unlock for ALL Broadcom BB5 Phones (via ATF Server or via LBF Servers)
--> Stand Alone Super Dongle Repair for ALL Broadcom BB5 Phones
--> Stand Alone SX-4 Authorize for ALL Broadcom BB5 Phones
--> Full Phone Authorization via ATF Network for ALL Broadcom BB5 Phones
--> Read FULL NAND Chip Flash for ALL Broadcom BB5 Phones
Now The ATF Network Supports ALL BB5 CPUs Released By Nokia!!!
Here is a List of Broadcom Based BB5 Phones:
C3-00 RM-614
X2-00 RM-618
X2-01 RM-709
X2-03 RM-709
X2-01.1 RM-717
2710c RM-586
7020 EM-497
**************************************************************************
*** IMPORTANT NOTES ABOUT BROADCOM AUTHORIZE PHONE VIA THE ATF NETWORK ***
**************************************************************************
1. Since NO other team can even Dream of releasing Broadcom Loaders before ATF Team,
all Broadcom Phones Authorized by The ATF Network will require 5 ATF Network Credits.
*** Note that it requires 5 ATF Network Credits and NOT 5 SL3 BF Credits...
2. You NEED ATF Network Activation in order to:
a. Authorize Phone
b. Decrypt PM 120 Hashes for BF Unlock
c. Stand Alone Super Dongle RPL Repair
d. Stand Alone SX-4 Authorize
3. You DO NOT NEED ATF Network Activation if you just want to:
a. Read FULL NAND Flash Chip and extract files etc...
4. If you Authorize a Broadcom Phone more than 1 time, then you will be charged and
charged again and again and again with 5 credits each time.
5. Some Broadcom Phones will get stuck when Reading Phone info in Normal Mode.
The correct way to do it is to change phone mode to TEST MODE before attempting
to Decrypt PM 120 HASHES, Super Dongle Repairs etc...
Here is a QUICK way on How to Correct Set a Broadcom Phone into TEST MODE from
Normal Mode (RF Inactive) Condition.
a. Put Battery to Phone and Power it On
b. Connect USB Cable and Connect to PC
C. Wait while Windows is Installing the Drivers...
d. Go to ATF Software "Settings" --> "Nokia Settings"
--> Put a check on "Skip Full Phone Information Sweep for BB5 Phones"
e. Go back to "Nokia Service" and click Scan Phone...
*** Once the phone is detected, you can select "Test" on that DropDown
list on the LEFT SIDE of "Backup RPL" Button. This will make your
Phone enter into TEST MODE....
**************************************************************************
**************************************************************************
**************************************************************************
What Else Is New?
N900 FIASCO Flashing has been moved from iTablets into the BB5 Section.
--> Now you can Flash N900 just like any other BB5 Phone... Super EASY!
--> The Current MAEMO Flash ENGINE does not support EMMC (VANILLA) Flashing Yet,
this will be Ported on the Next Update.
What was Fixed?
1. Infineon Self Test Hang on Exit: FIXED!
2. Box Activation (Activate New Box) FIXED!
Whats Up?
Try using the XFactor.skn skin... it Rocks!
*******************************
Advance Turbo Flasher v7.80
*******************************
Release Date: October 25, 2011
BB5 Major Functions Added:
<<< All BB5 Flash Functions are now using the Newest Nokia Loaders 11.34.000.2 >>>
* Authorize Phone for RAPUYAMA v2.1 Phones via USB or FBUS (Nokia 500, 600, 603, 700, 701 etc...)
---> SD Repair
---> Stand Alone SX4
---> Read PM 120 Hashes
* Read Flash Enabled for RAPUYAMA v2 Phones via USB or FBUS (Nokia 500, 600, 603, 700, 701 etc...)
* Read Flash Enabled for RAP3Gv30 Phones via FBUS Cable (5130c, 3110c, 7210c, 6300c etc...)
* Read Flash 8MB Limitation on RAP3Gv40 Phones Removed... Now you can Dump Full Flash Chip in 1 Session
* Extract Phonebook Contacts from Symbian Belle Flash Dumps made by the Read Flash Function
* Write Full Nokia Original RPL for all BB5 Phones (SL1, SL2, SL3, PA_SIMLOC30 15-digit and PA_SIMLOCK30 20-digit)
---> Write Simlock Data
---> Write Super Dongle Key
---> Write CMLA Key
---> Write WMDRM Key
---> Write PARTNERC (If Available)
---> Write MDM_KEYS (If Available)
* N900, N950 and N9-00 Full PM Backup Fixed
* Read / Write Product Profile Added
* Added more Phone Modes for changing (Alarm, Charging, Discharging etc...)
* Added Ability to read Multiple MMC Passwords in 1 Phone (upto 16 MMC Passwords)
SL3 BF Server Changes:
* Reduced SL3 BF Price from 30 Credits to 25 Credits
General Updates:
* Added New Products to Nokia.ini
* Added Updated Provider Listing for MNC_MCC Codes
* New Skins Added with Better Compatibility
* Fixed FTDI Device Close problem on New FTDI Libraries
* Mass Memory Flashing Automatically Switches to Turbo Mode when needed.
* Reads more Information from the Phone during Scan Phone (All Information Available)
* Fixed Problem for ATF Boxes which ask you to install Drivers each time you Start ATF Software
Support Page Updates:
* Added Credit Transfer for ATF Activation Credits
Driver Updates:
* ATF Box Driver v2.08.17(Beta)
* Nokia Connectivity Driver v7.1.45.0
* libusb Driver v1.2.5.0
Update Summary:
1. Uses Latest Nokia Loaders 11.34.000.2
2. Can Authorize ALL BB5 Phones
3. Can Read Flash Chip from ALL BB5 Phones except RAP3Gv2 (6630, N90, N70... very old Phones)
4. Can Extract Contacts from Symbian Belle Flash DUMPS
5. Can Full Write Nokia ORIGINAL RPL
*******************************
Advance Turbo Flasher v7.70
*******************************
Release Date: August 24, 2011
BB5 Major Functions Added:
* Read Flash Enabled for RAPUYAMA Phones via USB or FBUS
* Read Flash Enabled for RAP3Gv40 Phones via FBUS and USB (USB Limited to 8MB per Session)
* Read Flash Enabled for RAPIDO Phones via FBUS ONLY
* Extract Phonebook Contacts from Symbian ^3 and Symbian Anna Flash Dumps made by the Read Flash Function
* Supports International Unicode Characters for Contacts Extraction (Chinese, Arabic, Thai etc...)
* Recover Videos, Pictures, Music and Documents from ALL Flash Dumps made by the Read Flash Function
* BB5 Backup RPL Now Supported MDM_KEYS Certificate Backup and Writing
SL3 Bruteforce Server Added:
* SL3 Bruteforce JOB Uploading is now OPEN to ATF Network Users (Paid Service... Contact Your Reseller)
* Upload JOBS, Cancel JOBS and Check JOB Status with just a click of a button
* Only accepts "JOB" files generated by ATF Software's Decrypt PM 120 Function
Infineon Major Functions Added:
* Mass Memory (SD Card) Flashing Added for the NEWEST Infineon Phones (C2-02, C2-03, C2-05, C2-06, C2-07 and C2-08)
Common Updates:
* New BB5 Flash Loaders Version 11.24.000.3
* New Nokia Connectivity Driver 7.1.42.0
Support Site Updates:
* Special ATF ENO Files are NOW AVAILABLE for new RAPUYAMA PHONES (N8-00, C7-00, X7-00, E7-00 etc...)
* These ENO Fies were Dumped by the ATF Team and you can ONLY FIND them at the ATF Support Site
Bug Fixes:
* E6-00 and X5-01 Nitro Flashing Speed FIXED
* Rapido ADL Flashing Bug for E71, E63 etc.. FIXED
* USB ADL Flashing Format Partitions FIXED
* BB5 Booting Speed FIXED
* MMC Password Reading now Supports Unicode Characters
Frequently Asked Question:
Q: Do I need to pay ATF Network Activation in order to use the READ FLASH Functions of ATF 7.70 ?
A: NO, this new Feature is FREE.
Q: Do I need to pay Credits if I want to upload a Bruteforce JOB File ?
A: Yes, Contact your Reseller for more Infomation.
Q: How Long Does it take to Read FULL Flash an N8-00 with a 1 Gigabyte Flash Chip ?
A: Via USB, it will take about 12 minutes... Via FBUS, it will take MANY + MANY HOURS...
Q: Can I Read FULL Flash a 5130c or a 3110c Phone?
A: No. As of now, RAP3Gv3 Phones are NOT YET Supported... But it will be!
Q: Can I Recover My Contacts from a DEAD 5800 phone?
A: No, only Symbian^3 and Symbian Anna Flash DUMPS are Currently Supported for Phonebook Extraction.
We will first Support the Latest most HIGH END phones first before proceeding to the OLDER Models.
Q: Will you support ALL Symbian S60 Contacts Recovery in the Next Updates ?
A: Yes, we will support them when we have more time.
Q: Can I recover Picture and Videos from my DEAD 5800 Phone ?
A: Yes, ALL BB5 Phone DUMPs are supported for FILE Recovery just as long as they are not reformatted.
Q: I have a DEAD 5800 Phone and I have Flashed it a FEW TIMES already but it is still dead... Can I still
DUMP the Pictures and Videos from it?
A: Flashing will most likely REFORMAT the Phone... So your chances of Retrieval are Lower. Then Best thing
to do is to DUMP the Flash first before trying to FIX it via Flashing. If the FILES inside the Phone are
very important, then you should always AVOID Flashing before you try to RECOVER the IMPORTANT FILES.
Q: Why is FBUS Flash READING VERY Slow and USB Flash READING VERY FAST ?
A: Because of HARDWARE Limitations on the FBUS Channel, the READ Speed is severely Compromised.
Q: Can I READ Flash a Phone with a Special Language PACK inside and use the Flash DUMP to put the
Special Language PACK to my other Phones ?
A: This is possible, but it still REQUIRES you to have Knowledge on how to convert BINARY DUMPS
into FPSX Formatted BB5 Files.
Q: What is the MAIN PURPOSE of READ FLASH ?
A: To RECOVER IMPORTANT Files from a DEAD Phone... Just like RECOVERING IMPORTANT Files from a CORRUPTED SD CARD.
*******************************
Advance Turbo Flasher v7.65
*******************************
Release Date: June 22, 2011
*** Minor Bug Fixes for 7.60 Release***
++ RPL Write Problem for OLD Protocol and RAPIDOYAWE Phones Fixed
++ PM Writing when PM files contains blank empty lines fixed
++ USB Booting on Rapuyama phones adjusted
++ RAPIDOYAWE Simlock RPL and SD RPL Data fixed
Known Issues:
* Mass Memory Files should be FLASHED separately and should NOT BE Flashed
together with MCU, PPM or CNT files...
*******************************
Advance Turbo Flasher v7.60
*******************************
Release Date: June 21, 2011
*** Major Flashing Updates ***
Flashing Updates:
+++ BB5 Mass Memory Flashing Enabled for FBUS New Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for FBUS Old Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for USB New Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for USB New Protocol (Rapido) (Fastest In The World)
+++ Infineon USB XG2130 Flashing Updated to support C2-00
+++ Infineon FBUS XG110 Flashing Updated to Support X1-00, X1-01
+++ Infineon FBUS XG101 Flashing Updated to Support New Loaders
+++ FBUS New Protocol Flashing Rewritten (Speed Increase)
+++ FBUS Old Protocol Flashing Rewritten (Speed Increase)
+++ Full Certificates Backup for New Phones with 'PARTNERC' Certificates (E6-00) (First In The World)
+++ Full Certificates Write for New Phones with 'PARTNERC' Certificates (E6-00) (First In The World)
+++ USB NON-ADL Flashing for Rapido Phones (Can Flash Totally Dead Phones)
General Updates:
++ New Nokia FBUS and USB Flash Loaders (11.16.000.2)
++ New Nokia Infineon Static 'Buscheck' Loaders
++ New Nokia Connectivity Cable Driver (7.1.40.0)
++ New ATF Drivers Introduced (2.18.14)
Minor Bug Fixes
+ USB ADL Flashing Now 80% Faster Than Previous Versions (5130 full Flash = 6:xx minutes)
+ 6500c CNT Flashing Problem Fixed
+ Big Flash Files 1GB upto 16GB is now supported (Dynamic RAM Allocation)
+ MMC Password is now saved before FULL Factory Reset is done on Normal Phone
+ Life Timer Locations added for Newest BB5 Phones
+ Partition Block Parsing Fixed for Newest BB5 Phones
+ USB Full Phone Info Sweep Fixed for Symbian ^3 Phones
+ USB Phone Polling when Drivers are still Installing Fixed (Windows 7 32-bit/64-bit)
Known Issues:
* Rapido Mass Memory Flashing via USB should use "Skip ADL Chk" Option
* Some New RAPUYAMA Phones Cannot Be Flashed with "Nitro" Mode... Use "Turbo" for E6-00 and X5-01...
* If you Get an Error Message Pop-up When you Close the Software, there are 2 slutions:
--> Use iMetal Skin
--> Delete this File C:\AdvanceBox Turbo\Flasher\ImageIcon\atf_store.html
Update Summary:
1. Mass Memory Flashing for ALL BB5 Phones via FBUS or USB is 100% Supported (First and Only In The World)
2. FBUS Mass Memory Flashing is Faster than FPS-21 and Phoenix USB !!! (Fastest In The World)
3. All Currently Released Infineon Nokia Phones are 100% Supported and Fully Tested (First and Only In The World)
4. Now You can flash Dead Rapido Phones (with fully erased PAPUBKEYS) via USB
*******************************
Advance Turbo Flasher v7.50
*******************************
Release Date: May 13, 2011
+ RAPUYAMA ALL HASHES via USB Cable ONLY !!!
+ RAP3Gv4 ALL HASHES via USB Cable ONLY !!!
+ Stand Alone MASTER CODE to NCK Calculator
+ Bug Fixes for v7.49
Good News to ALL ATF Users who ACTIVATED Their Boxes for The ATF Network!!!
ATF 7.50 Unleashes the Power of Normal USB Cables by supporting
ALL RAPUYAMA and RaP3Gv4 Phone Maintenance via USB Cable ONLY!
Now you don't have to worry about:
1. FBUS Cables with Wrong Pinouts
2. FBUS Cables with missing RX2 Pins
3. FBUS Cables with missing Filter Pins
4. FBUS Cable Converters/Adapters for Multiple Boxes
4. FBUS Cables with Poor Quality Wires
5. FBUS Cables that requires you to Disassemble the Phone (C7-00 and N8-00)
6. RAPUYAMA Phones without FBUS Pinouts (E7-00)
No more Headaches... Just use the USB Cable that came with the Phone!
ATF First In The World Unique Features for USB Only Connection:
1. USB Only Phone Authorization via The ATF Network
2. USB Only Stand Alone Decrypt PM 120 HASHES for PA_SL3 and PA_SIMLOC30 Phones
3. USB Only Stand Alone Super Dongle Repair for PA_SL3 and PA_SIMLOC30 Phones
4. USB Only Stand alone SX-4 Custom Keys Authorization for PA_SL3 and PA_SIMLOC30 Phones
PM 120 HASH Decryption is always VERIFIED WITH RSA!!!
100% Guaranteed that the Extracted HASHES are Correct (Not like other tools)
STOP WASTING TIME/ELECTRICITY/CREDITS because of WRONG HASHES !!!
Join The ATF Network Today for just 49 Credits!
Now you don't have to Disassemble C7-00 Phones...
Now you don't have to Disassemble N8-00 Phones...
Now you can already unlock USB Only RAPUYAMA Phones (E7-00)... (First in The World)
Be Professional... Be Ahead... Be ATF !!!
A.T.F... Always The First!
*******************************
Advance Turbo Flasher v7.49
*******************************
Release Date: May 5, 2011
For a 1 time Activation of 49 Credits, Joining The ATF Network
will allow you to perform UNLIMITED TASKS to ANY BB5 FBUS HASH
for all BB5 Phones with FBUS Connection in Planet Earth...
Update and Activate to ATF v7.49 Now and Enjoy the following supported TASKS:
* Unlimited SL3 PM 120 HASH Decryption for ALL NEW HASH BB5 Phones with FBUS Connection
* Unlimited SL2 Direct Unlock for 6120c, 6760s and 6790s NEW HASH 479Cxxxx Phones
* Unlimited Super Dongle Repair for ALL NEW HASH BB5 Phones with FBUS Connection
* Unlimited SX-4 Authorization (CUstomized Keys) for ALL BB5 Phones with FBUS Connection
* Unlimited SL3 Downgrade for phones with ENO files available
Activate Now and get a chance to Participate and WIN FREE RAPIDO NEW HASH Unlocking!!!
Special SL3 LBF Tools for Hashcat v0.05 by atom on v7.49
* Supports Manual IMEI and HASH input or input via LOG files (*.log, *.bcl and *.sha)
* Resume or Skip Brute Force Jobs at any Percentage % you want
* Divide Brute Force Jobs to 2, 3, 4, 5 or 10 Super Computers (Distributed Cracking)
* Specify Temperature Limit (85, 90, 95, 100 or NO LIMIT)
* Improve your BF time by guessing ODD or EVEN for last digit in the Master Code!
General Updates Added on v7.49
* Infineon X1-00 RM-732, X1-00.1 RM-733 Flashing Support Added
* Fixed FTDI Read Timeout Bug on BB5 OLD LOADER + OLD PROTOCOL Flashing
* Self Test Status Report Updated
Additional Information:
* For End users who paid 99 Credits for ATF Network Activation since March 2011,
you will all get a 50 Credits Rebate which will be delivered back into your
account within 24 hours.
*******************************
Advance Turbo Flasher v7.40
*******************************
Release Date: April 5, 2011
DCT4 Updates:
Stand Alone RPL Calculation via "REPAIR IMEI" button for ALL DCT4 Phones ASICs (2, 5, 6, 7 and 11)
Master Code Calculator Version 2.0 can now Correctly Calculate the 10-digit Master Code for ALL DCT4 PHONES
BB5 Updates:
Stand Alone BB5 SL3 15-digit NCK Calculator for ighashgpu Brute Force Result
PA_SIMLOC30 NCK Code Sending now supported for New 20-digit Code
RAPUYAMA and RAP3Gv40 Booting Fixed
Common Changes:
Fixed Full Factory Settings Command
Fixed Product Search and Phone Search Menu
Self-Test Actual Status is now Displayed
Notes:
*** It is advised that you should use iMetal_Dark.skn
1. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner Excemption/Exclusion List of Trusted Applications
2. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall Excemption/Exclusion List of Trusted Applications
3. DO NOT disable the Microsoft Windows Firewall!!!
4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get information on how to add AdvanceBox.exe to the Excemption/Exclusion List
5. Make sure you have done Steps 1-2-3-4
*******************************
AdvanceBox Turbo Flasher v7.20
*******************************
Release Date: March 9, 2011
*** Freeloaders for RAPUYAMA and RAP3Gv40 Phones Released ***
Freeloaders are 100% Stand Alone loaders that allow you to perform
Super Dongle Repairs, SX-4 Authorization and PA_SL3 or PA_SIMLOC30
PM 120 HASH Decryption. These Loaders DO NOT need an ATF Network
Account or Credits. It is completely Stand Alone just like the other
OLD Hashes.
RAPUYAMA Phones Currently Supported: ROOT HASH = 25B977A055BE9B5DEC0C38A2A279C695
E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)
RAP3Gv40 Phones Currently Supported: ROOT HASH = 7B045400E1752022F9EB80B0DEA9C65D
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)
======================================================================
The Phones listed abov