Latest from TLR:
The Team Losi Racing™ 22™ 2.0 buggy is an evolution of the visionary 1/10-scale platform that captured wins at the ROAR National Championships, Spektrum Race and Reedy Race of Champions the year it was introduced. Like its predecessor, it is engineered to take full advantage of high-output brushless power systems and includes hardware for both rear- or mid-motor chassis configurations. To this race-winning formula it brings updates to the suspension geometry, shocks and diff that make the 2.0 even easier to drive fast.
Taking the winning platform of the 22 to the next level wasn't easy but the 22 2.0 is a worthy successor. The 22 2.0 buggy features a refined front suspension geometry which makes the car easier to drive fast. The hinge pins, shock shafts and king pins all feature improved Titanium Carbo-Nitride coating for reduced friction and better wear characteristics. The shocks themselves have been updated with bleeder shock caps, low-friction X-Ring seals and machined pistons for the smoothest, most-consistent shocks ever produced by Team Losi Racing. Additionally the 22 2.0 also includes some of the top hop-up parts from the 22 as standard items including aluminum rear wheel hexes, aluminum rear camber block and aluminum shim kit.
The (R)Evolution continues with the Team Losi Racing 22 2.0. Combining unique design elements, easier-to-drive handling characteristics and the exceptional durability that the platform is known for the 22 2.0 continues to demonstrate that Engineering Wins.
Features:
Spindle and Caster Block With Revised Geometry
Treaded King Pins and Outer Hinge Pins
Aluminum Front Pivot
Steering Rack with Ackermann Adjustment
Aluminum Ball Stud Spacers Throughout
Titanium Carbo Nitride (TiCN) Coated Shock Shafts and Hinge Pins
Adjustable Hard-Mount Battery Holder
Aluminum Rear Camber Block
Revised Rear Hub Carrier with Additional Clearance
Inside Shock Mounting Location
Gen 2 Shocks with Machined Plastics and X-Ring Seals
Adjustable CVA Offset
2.5mm Hard Anodized Aluminum Chassis
Updated Differential
HDS Slipper with Octagonal Design
All Metric Hardware
Specifications:
Type: 2WD Buggy
Scale: 1/10
Length: 14.66 in (372.4mm)
Width: 9.6 in (245.0mm)
Height: 7.87 in (200.0mm)
Ground Clearance: Adjustable
Wheelbase: 11.2 in (283.4mm)
Chassis: 2.5mm 7075-T6 Aluminum
Suspension: 4-wheel Independent
Drivetrain: 2WD
Wheel Size: 2.2 in (55.9mm)
Kit/RTR: Kit
Shock Type: Coilover, Oil Filled
Body: Clear Lexan
Needed to Complete:
Assembly Tools
2-Channel Radio and Receiver
Electronic Speed Controller
540-Sized Motor
Pinion Gear
Steering Servo
1/10th 2WD Front Tires and Inserts
1/10th 2WD Rear Tires and Inserts
Battery Pack
Charger
Polycarbonate Paint
TLR03002 - $349.99
Due Late September, 2013
