To do our own pest and weed control, we don't need any exotic equipment, you just need idea and some knowledge of science. Mansukhbhai Jagani of Gujarat (India) has both and he invented sprayer which is topic of our today's discussion.
Pest Control is an important step for good agriculture production and we have already discussed about mechanical sprayer in this blog. As we know from that post, that in mechanical sprayer farmer need to pump manually and spraying remains difficult task with mechanical sprayer. Today, we will discuss bicycle sprayer which is much easier to operate than its predecessor because it is powered by bicycle.
What's the need?
Spraying of pesticides and other chemicals in the far is a tedious and laborious task. The conventional knapsack sprayers available in the market require manual labor to operate, and nowadays labour is difficult to find due to movement of farm laborers toward cities. The small farmers cannot afford to buy the power operated sprayer or tractor-mounted sprayers available in the market, as these are very costly and are of not much use to small farmers due to small land holdings.
Concept:
This system works on three pertinent concepts:
1.First is to transform rotational motion into reciprocating motion. To achieve that small
sprocket (we can get it from any old bicycle or from any store) is connected to the piston pump and this sprocket rotates when we move bicycle forward because it is connected with large sprocket of bicycle as shown in video.
2.This reciprocating motion than pushes piston moves forward and backward in a repetitive cycle.
3.Pesticide pumps out of reservoir
For better understanding of inner mechanism of reservoir you need to understand basics of spray pump and how it moves liquid from reservoir to top. To pump out pesticide we should know that pesticide must always move outside from reservoir.
Fluid must move upward only, in other words, it must be unidirectional. This can be achieved only by one way valve. The most important part for any pumping mechanism is one way valve and in our experiment too, we will use valve which allow fuel to enter but stop it from exit.
sprocket is connected to the piston pump