STOCK ROM ACER Liquid E700 Trio - Ported to - EVERTEK EVERFANCY III
Acer Rom is another wonderful rom that everybody cannot wait for.
Here is another elegant Rom from unmodified system dump from
Acer E39 / E700 – fully ported to EVERTEK EVERFANCY III
Android kitkat 4.4.2 - rooted
2 New Roms to download, Zip.update, with "Philz touch recovery" : Stock Rom Acer Liquid E700 Trio & Stock Rom Evertek Everfancy III L.108 30/08/2015 (*) see below for procedure to upgrade.
Posted, [Fixed update 2] 27/08/2015
Acer AV0K0_E39_1.022.00_EMEA_CUS1 ported to Evertek EVERFANCY 3
Hardware : MT6582
Model : Acer E39 – E700 ported to EVERTEK-EVERFANCY III – L108
Build number : Acer_AV0K0_E39_1.022.00_EMEA_CUS1
Build date UTC : 20150204-105321
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V47, 2014/08/12 20:21
Kernel v : 3.4.67 (jenkins@jenkins216) (gcc version 4.7 (GCC) ) #1 SMP Thu Jun 4 14:59:19 CST 2015
First make root, and backup your nvram which serve to fix, wifi and 3G problems, after upgrade.
After update, you need to restore your nvram and perform a factory reset (*) , then restore your backup userdata file.
Hard Reset is a fast and easy way to wipe all of your personal data from your device and make it 100% clean :)
Tutorial Upgrade 1:
Before flashing Evertek Everfancy 3, it must be made a BackupNvram
it will serve to the end of flashing operation to retrieve data nvram wifi and 3G
Follow these steps :
1) install the last usb drivers phone :
- UniversalAdbDriverSetup.msi
- Usb_Vcom_Auto_Installer_v1.1236.00 or Usb_Vcom.8.1.win10
(you need to disable Driver Signature Verification on 64-Bit Windows 8.1 or 10) see procedure below (*)
- install iRoot_1.7.9
2) Enable the USB debugging
3) root your phone, with software : iRoot_1.7.9.10454_cid1005_7337ba1e.
and intall recovery : (* All files available to download)
Choose one of these prepared recovery and flash it with SPflash tool ;
– recovery.Ever3.Factory.img
– recovery.Ever3.CWM.v.5.5.0.4.for.E39.img
- recovery.Ever3.Philz.Touch.v.6.57.9.img
- recovery.Ever3.TWRP.v.2.8.1.0.img
And, also, you can create your custom MTK recovery by: MTK-PhilZ.setup, or TWRP.2.8.1.0 Setup
Then after, you need to install these apk files : SuperSU-file v2.46.apk , BusyBox Pro.apk and ES Explorateur de Fichiers_3.2.5.5.apk
4) Make a Backup nvram of your Everfancy 3 phone
use the file MtkDroidTools v2.5.3 to do this.
First, you need to execute superuser / kinguser and BusyBox to get full root access.
5) Use the file SP_Flash_Tool_v5.1452.00 to install the new firmware Acer E700 – E39
Stock rom Acer E39 (E700) AV0K0 e39 1.022.00 EMEA GEN2
Open the directory ! Files_to_FlashTool
and select the scatter file : MT6582_Android_scatter.txt
click Format and download all
6) turn off your phone
7) connect your phone to the PC with USB cable
Software start the download via Usb_Vcom driver
9) At the end of the operation of flashing, wait for the time it takes for your phone to restarts
10) After the first reboot
- Run Program: MtkDroidTools v2.5.3
- and restore nvram files from your Backup nvram
- Everfancy-III_352752066027285_nvram_150527-051647.bin
- Everfancy-III_352752066027285_nvram_150527-051647.tar
then reboot, and All is well that ends well
Faithfully yours
TBS TN – Tunisia
After a Hard / Factory reset, you need to restore your nvram 3G data phone
If first, you performed a backup of your phone, with the ClockWorkMod recovery: autoCWM v5.5.0.4
you need to restore your device from a backup.
Restoring a backup :
Boot into Recovery Mode, Select Backup and Restore
Select Restore, wait for it to complete. and reboot system.
Otherwise it's necessary to follow the following steps:
1) Enable USB Debugging Mode On Your Android Phone Device
Before the Developer Options menu will appear, some versions of Android now
require that you unlock it, by tapping the secret “Build Number” unlock area.
This is found under Settings > About Phone > Build Number
2) Run kinguser.apk and apply root authorization
3) To full root level access, re-install busybox.apk application and run it.
4) Connect your phone to your computer, open Mtk Droid Tools v2.4.5 software,
Choose IMEI/NVRAM then Restore Nvram
You may now reboot your phone and check via *#66# and *#06#
if you now have a valid Serial Number and IMEI Numbers.
(*) Tutorial Upgrade 2: How to boot into recovery mode ?
We need to use Recovery mode to factory reset the device, delete the cache partition, or apply software updates.
- Hold down the Power key and select Power off.
- Press and hold the Power key and the Volume up (+) key.
You should see the Android mascot on his back, a bunch of information about your device, and Start at the top right of the screen :
Android system recovery <3e>
EVERTEK-EVERFANCY-III-L108
To navigate through the menu options you use :
The Volume (+) up and Volume down (-) keys.
The Volume up (+) key is also, used, to make a selection.
Then, Volume up (+) / down (-) to move highlight and volume up (+) button to select.
You can always choose from:
- Reboot system now.
- Apply update from ADB, Sdcard and cache
- Wipe data/factory reset: this will wipe all of your data, (photos, videos, music,
apps, everything) and return the phone to factory conditions ready to be setup
all over again. It will also wipe the cache partition.
- Wipe cache partition
- Backup user data
- Restore user data : to restore user data, you need to select the file *.backup
userdata_20100101_000023.backup
(*) Tutorial Upgrade 3: Custom installation with Philz touch recovery ?
1) install Philz recovery with SpFlash tool.
Open SPflash tool, choose "download only" option + Recovery column.
find file : recoveryever3.Philz.Touch.v.6.57.9.img, and flash it to phone.
2) If CWM – ClockWorkMod Recovery, was installed yet, then take file
Zip_Philz.Touch.recovery.v6.57.9.zip, and install it on recovery mode.
3) Press and hold the Power (on) key and the Volume up (+) key,
then reboot into recovery mode (Philz Touch 6.57.9)
4) Choose Wipe and format options
5) Clean to install a new Rom
6) Yes, wipe user and system data,
7) then press any key to continue
return to, Install zip
9) Choose zip from /storage/sdcard1
– Select folders: clockwordmod/custom_rom/
- Choose the Zip file to install : Zip_PhilzRom_Acer_AV0K0_E39_1.022.00_EMEA_CUS1_20150829_000804.zip
Zip_PhilzRom_Everfancy_III.L108_20150829_152507.zip
10) Press Yes – Install Zip_PhilzRom file…
and wait installing update…, until message box: "install from sdcard complete!", then press any key to continue.
11) Choose Reboot system now,
then press "Yes disable recovery flash", and the phone reboot.
How Backup your custom rom with Philz touch recovery ?
1) Reboot into recovery mode (Philz Touch 6.57.9)
Press the Volume down (-) key to navigate down, and Volume up (+) key to navigate up
2) Go to Backup and restore
3) Clone Rom to update.zip
4) Create from Current Rom
5) Create Rom in /storage/sdcard1
6) Backup complete
7) Creating update.zip,
then Reboot system now
* Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10
To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.
Simply select Restart from the power options menu
(on Windows 8 that’s under Charms or on the login screen, and in Windows 10 it’s on the Start Menu).
Hold down the SHIFT key while you click Restart.
Once your computer has rebooted you will be able to choose the Troubleshoot option.
Then head into Advanced options.
Then Startup Settings.
Since we are modifying boot time configuration settings,
you will need to restart your Computer one last time.
Finally, you will be given a list of startup settings that you can change.
The one we are looking for is “Disable driver signature enforcement”.
To choose the setting, you will need to press the F7 key.
That’s all there is to it.
Your PC will then reboot and you will be able to install unsigned drivers without any error message.