The Final Cut Pro won't import MOV files from Nikon D5200 smoothly. The easy workaround is to transcode Nikon D5200 to a more "edit" friendly codec. Here is how
The Nikon D5200 is a new 24.1megapixel DSLR camera that can record Full 1080p HD movies at 1920x1280 pixels / 25fps or 50i/60i with stereo sound. A high-resolution 3-inch vari-angle LCD monitor makes it easier to compose your shots from difficult angles, while the extensive ISO range of 100-25600 should cope with virtually all lighting conditions. A 5fps burst shooting mode, EXPEED 3 image processor, 39-point autofocus system with 3D Focus Tracking, 2,016-pixel RGB metering sensor, High Dynamic Range mode, Active D-Lighting, seven different special effects for stills and movies and a new generation GUI design complete the Nikon D5200 s headline specs.
Have you tried to import your clips from Nikon D5200 to FCP 6/7/X or other video editings? Well some Nikon users may have tried this before. But they may have met more or less problems.
In fact, H.264 MOV video format from Nikon D5100 is a long GOP format that is highly compressed. To be frankly, it is not a friendly format for FCP X editing. Thus it is difficult for the Nikon users to import these videos to FCP X for editing smoothly. If you want to import Nikon D5200 1080P MOV to FCP X on Mac for editing, you need to convert the 1080i MOV footages from Nikon D5200 with an easy-to-use tool first.
Here we recommend the best D5200 MOV to FCP Converter to you. You can convert/transcode Nikon D5200 MOV to a compatible format for FCP X on mac quickly and easily. Before editing the footages from Nikon D5200, you are advised to install the first-class Nikon D 5200 MOV to FCP X Converter on your mac.
Guide:
Step-by-step guide for all of you to make Nikon D5200 MOV edit in FCP 6/7/X on mac without quality loss.
Step 1: Import Nikon D5200 1080i MOV files to the best D5200 MOV to FCP 6/7/X Converter.Before imputing the clips from Nikon D5200 to the converter, you should connect your camcorder with your computer via USB cable, or you can copy the entire folder of the video to your computer directly.
Click the Add Button on the top of the main interface to import Nikon D5200 MOV to the best D5200 MOV to FCP X Converter.
Tip:You can double click the each file to have a preview.If necessary, you can tick the “Merge into one” box to merge D5200 1080i MOV files together.
Step 2: Select an output format for FCP X and set the output folder. Click on the dropdown menu of “Format” and then choose “Final Cut Pro”, you will find that there are many output formats for you to choose. You can choose the one that you prefer. Apple ProRes 422(*.mov) is the common output format for FCP.
After choosing the correct output format, you can set the output folder by clicking “Browse” icon to save your converted file as you like.
Tip:
1. If you just have FCP 7 or above, you can choose these formats about Apple ProRes you like, but if your FCP on Mac is just FCP 6 or earlier, pls choose Apple ProRes 422(*mov) or Apple ProRes 422 (HQ)(*mov) in that other 3 formats are not supported by FCP 6.
2. If you want the size of the converted files be smaller, you are advised to choose Final Cut Pro>Apple ProRes 422(LT)(*mov) as the output format.
Step 3: Click “Settings” icon to adjust audio and video parameters. You can adjust codec, bit rate, frame rate, sample rate and audio channel in the Profile Settings interface according to your demands and optimize the output file quality.
Tip: You’d better set the video frame rate as 30fps, video size as 1920*1080 to keep the best quality for editing Nikon D5200 1080i MOV in FCP X on Mac. (If you are recorded in PAL, the 25fps as the frame rate is the best choice for you.) If you wanna have a smaller file size but keep the good quality, you can decrease the audio or video bitrate.
Step 4: Start conversion of your Nikon D5200 1080i MOV file to ProRes for FCP X editing.Click the “Convert” button; it will convert Nikon D5100 1080P MOV to FCP X on Mac immediately. You can check the process in the “Conversion” interface.
Tip:
1. Deinterlace 1080i files: Click Edit and select "deinterlacing" in the Effect.
2. This professional D5200 MOV to FCP X Converter can also help you to transcode other video formats such as .mxf, .mov, m4v and so on for portable devices, HDTV or Editors.
Related guides:
Loading AVI files into Windows Movie Maker
How to Transcode DVD ISO to AVI for playing
How to transfer Sony PMW-EX3 MP4 to FCP X
Transcode AVCHD to Apple ProRes for FCP X/7
Import P2 MXF for Editing in Avid Media Composer
Convert VOB to AIC .mov for editing with iMovie 11
How to Convert Nikon D5300 video to Premiere easily
Make Sony AVCHD editable in Adobe Premiere CC/CS6/CS5/CS4
Solve Panasonic AVCHD incompatiblity with Premiere Pro CC/CS
Importing .MOV files from Canon 700D to Mac Premiere Pro CC/CS6