AutoEnginuity OBD-II ScanTool Release Notes
© Copyright 2003 - 2015
AutoEnginuity would like to announce the release of Giotto scan tool software. Giotto is a first of its kind touch-based scan tool making the user-experience faster and smarter, while remaining a powerful tool. Highlighted features for the 13.1 release are: BMW electric car support (i3 / i8), Prius PlugIn support, Ferrari and Maserati Write Clutch Coniguration for early models, and finalized the 14MY coverage.
Giotto Version 13.1.0
---------------------
General
• Added a warning message if the ProLine VCI hardware was connected to the computer after the software was started. The warning will relaunch the application once the hardware is connected
• Added SAAB and Generic OBDII to the list of makes
• Fixed Change Vehicle System (F7) not working in all cases
• Fixed Tab Control toolbar crashing software during software launch if it was previously turned during the software closing
• Fixed default layout of tabs and toolbars not being implemented on first installation
• Fixed file playback on second chart not using the correct scaling for third and fourth plots
• Fixed crashing during file playback
• Fixed IE11 not displaying IM Results reports
• Fixed Technical Support graphic and make logos not displaying correctly with high-DPI devices
• Fixed Generic OBDII missing descriptions for diagnostic trouble codes P007A - P007F
BMW-family
• Added i3 / i3 REX and i8 full EV models support
• Added finalized M235i (F22) '14MY model coverage
• Added finalized X5 (F15) and X6 (F16) '14MY model coverage
• Added missing trouble code descriptions for late models
Chrysler-family
• Added 3.6 Liter for Dodge Caravan '11
• Added Jeep Renegade model
• Added Forward Facing Camera Module and Electric Parking Brake support
• Fixed SBEC / JTEC actuation failures when module has accepted actuation request
• Fixed actuations for the Chrysler Town & Country '02 Body Control Module
• Removed Chrysler 300C and 300M and just made a single Chrysler 300 model entry
• Added Throttle Follow Test and ETC Learn for the PCM Variant 25 module
• Added Throttle Follow Test and ETC Learn for the PCM Variant 26 module
Ferrari / Maserati
• Added Write Clutch Configuration for Gearbox Marelli Rev1 and Rev2
• Added Maserati 4200 (M138) ECM and gearbox support
• Fixed Gearbox Marelli (360 / 430) Self Learning reporting Not Supported yet would complete successfully
Ford-family
• Added Ford Powerstroke 6.7l '11 - '14 Service Functions (SCR and DPF)
• Fixed Ford Powerstroke 6.7l '11 - '14 Fuel Rail Pressure - A and Fuel Rail Pressure - Commanded reading incorrectly
• Fixed Ford Powerstroke 6.7l '11 - '14 Exhaust Gas Temperature B1S3 - Volts not showing in the list
• Fixed Ford Powerstroke 7.3l '95 - '04 MAT - V, MAT, MAP - Hz missing in the sensor list
• Fixed Ford Powerstroke 7.3l '95 - '04 ABS Wheel Speed Sensors missing in the sensor list
GM-family
• Added 3.5 Liter LX9 for '06
• Added secondary CAN address check for the Body Control Module '10 - '11
• Added Air Pump and Air Solenoid actuations for the 3.8 Liter (2) engine
• Improved HVAC Module support for '11 Light Trucks C and K body codes by breaking into two seperate modules (Manual and Automatic)
• Improved auto-detection speeds on some vehicle models
• Removed GMC Sierra 1500 Pickup, Sierra 2500 Pickup, Sierra 3500 Pickup models and added Sierra model
• Removed Chevrolet 1500 Pickup, Chevrolet 2500 Pickup, Chevrolet 3500 Pickup models and added Chevrolet Pickup model
• Renamed the Sierra HD to Sierra HD '14 as that's the only year that model is needed
Honda-family
• Added CAN-based new systems: Electric Servo Brake System and Electric Parking Brake System
• Updated the auto detection process for SWS modules
Hyundai / Kia
• Added SMART Key (SMK) full system support for 2014 models
• Added Blind Spot System full system support for 2014 models
• Added Electronic Parking Brake (EPB) full system support for Cadenza
• Added Cluster Unit (CLU) full system support for 2014 models
• Added EVAP Leakage Test and Reset Adaptive Values for the Optima 2.0L Turbo engine
Isuzu
• Fixed Engine Selection description displaying invalid characters
Land Rover
• Fixed diagnostic trouble codes not retrieving on 11bit CAN controllers on the New Ranger Rover '10 - '14
• Fixed diagnostic trouble codes crashing on HVAC controller on the Evoque '11 - '14
Mazda
• Added SWS Calibration for newer Mazda 3 and Mazda 6 models
• Improved actuation handling for initialization or reset commands by no longer requiring the user to uncheck. The software will now automatically show the results and uncheck the box
• Fixed Transmission Shift Solenoid (3 and 4) - Measured reporting the wrong values for Mazda 6 '14
• Fixed CX5 '12 - '14 Transmission Oil Pressure (1 - 4) Switch missing in the sensor list
Mercedes Benz
• Added AdBlue (SCRM) support for Sprinter '10 - '14 (906)
• Added Weight Sensing System '11 - '14 (ORC172) sensor support
• Added TPMS Write Identification Numbers for SL Class '12 - '14 (231), SLK Class '11 - '14 (R172), M Class '12 - '14 (166), and GL Class '13 - '14 (X166)
• Added Normalize Positioning Of AC Motors, Teach-in of Actuator Motors, and Breaking-in of Refrigerant Compressor for GL Class '13 - '14 (X166)
• Added Reset Offset Value of Signal Steering Angle for E Class '10 - '14 (W212), CLS Class '11 - '14 (W218), SLK Class '11 - '14 (R172)
• Fixed AirMATIC Move To Calibrated Level - Automatic not moving to the set Normal Level for GL Class '13 - '14 (X166)
• Finalized all SLK Class '11 - '14 (R172) coverage
Nissan / Infiniti
• Added warning for latest Airbag controllers to use Self-Test when DTCs are not read from the DTC Read request
• Added BCM to Quick List ™ for TPMS controllers
• Added missing ABS system to Juke '11 - '14
• Added missing CTV-A and CVT-B sensors to AT CAN (Rev) for Nissan TSB NTB13-079b
• Fixed missing sensors from 4WD CAN (Rev3) system
• Fixed Differential Lock live data and trouble support not working on all models
Toyota-family
• Added Prius PlugIn full model support
• Added Prius Air Bleed - Usual Air Bleed sub-version support
• Added Steering Sensor Initialization for Active Front Steering system
• Fixed Vapor Pressure sensors reporting incorrect scaling on some late-models
Giotto Version 13.0.1
---------------------
General
• Fixed User Guide not loading on 64bit Windows installations
• Fixed broken link to request activation codes in the Feature Activation window
• Fixed plot 3 in Graph 8x and Graph 4x not using the correct y axis
Ferrari / Maserati
• Fixed Maserati M145 '13 - '14 SX and DX EnhancedPowertrain coverage
Ford-family
• Fixed Explorer '11 - '14 missing AWD Clutch Control Module support (both system and the Powertrain bi-directional control All Wheel Drive Clutch Control Commanded)
• Fixed ProLine VCI not retrieving Software or Vehicle ID Block information on older SCP models
• Fixed Ford Powerstroke '96 - '03 ABS system missing the left wheel speed sensor
GM-family
• Added C/K Electronic Brakes for the '13 Light Trucks
• Added Cylinder 7/8 for the '11 6.2 Liter L94 (F) (i.e., GMC Yukon Denali)
• Fixed CMP actuation for the 3.5 Liter (N) Chevrolet Impala '09
• Increased DTC pulling speed on CAN-bus vehicles when modules aren't present
Toyota-family
• Improved all Utility functions to follow the updated Toyota usage instructions
• Improved ABS Air Bleed for Prius '03 - '09 (Gen II) to follow updated process
• Improved ABS Air Bleed for Prius '10 - '14 (Gen III) to follow updated process
• Fixed ABS Air Bleed not working for Prius '10 - '14 (Gen III)
• Fixed Linear Valve Offset Calibration not working for Prius '10 - '14 (Gen III)
• Fixed VIN decoding for Prius '10 - '14 (Gen III)
• Fixed TM Control system not being sorted in the Transmission group in Vehicle Selection
AutoEnginuity OBD-II ScanTool Release Notes.zip
File Type:
Downloaded:
11 times
Size:
12.2 KB