Due to our expansion, JGC Singapore Pte Ltd, an established EPC contractor in the Oil & Gas / Petrochemical Industry, invites suitable candidates with relevant qualifications and experiences to take on the challenges in a conducive and vibrant work environment.
Principal Piping Engineer
Acts as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.
Duties & Responsibilities:
To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
To assist in planning and organizing piping engineering activities and manpower requirement for the project.
To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project .
To prepare piping information list and layout and document list following standard procedure created for the project.
To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
To provide field engineering support/advice towards piping installation and testing at construction site.
To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
To evaluate the performance of and provide counseling and guidance to members of the project.
To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
To perform other tasks that may be assigned by the Department Manager.
To carry out engineering support work during the construction phase of the project.
Requirements:
Education:
Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.
Skill Requirements:
Ability to use computer equipment and peripherals to carry out routine computing tasks.
Basic Knowledge of AutoCAD/Cad Pipe and Microstation 2D CAD.
Basic knowledge of 3D Model review through Naviswork or SPR.
Interpretation of stress/vibration analysis report.
Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
Strong leadership qualities and analytical and reasoning abilities.
Good interpersonal and communication.
Senior /Lead / Principal Rotating Engineer
Responsibilities:
The position requires a matured person who has consistent working experience in mechanical engineering in Engineering department and has consistently handled engineering activities of rotating and package equipment for EPC nature of projects with sound technical back ground and responsibilities in selection, conduct basic design, check client specifications, reviewing and controlling of detail engineering of vendor’s packages, reviewing vendor’s factory and field acceptance test packages and ensure equipment performance to the given specification at site.
He/She is able verify design, supervise, teach/coach and act as a mentor. He/She is also the ‘key person’ to approve certain work, supervise a group of assigned Engineers for maximum output. Able to demonstrate good quality work, procedures, resolve issues and control cost, schedule and manhour. Developing strategies to control vendors, interface data exchange and manages error free output.
Nature of job: FEED, Detail Engineering, EPC or EPCm projects
Detail of work to be handled:
Preparation of all engineering deliverables such as:
Mechanical data sheets
technical specifications
Tie-in, battery limit definitions for piping, instrument, electrical interfaces
Space control and management drawings/documents.
Requisitions, Clarifications, technical bid evaluations.
Equipment modification specifications
Bill of materials for construction scope of work and other construction required data for site work.
any other related documents required for completion of work/assignments.
Check and release all error free deliverables to project/client.
Ensure design/deliverables are in conformance Code, standards and meet project specification requirements.
Checking of vendor documents for assuring compliance.
Smooth working with team of engineers for transfer of information, knowledge, training/mentoring and resolving issues etc.
Control of all interface matters of rotating equipment system and ensure smooth exchange data/information matters between various disciplines.
Attend site work as required to complete engineering work, collect data, trouble shooting at site, performance check or handover of equipment/packages.
Compile lesson learned data base, procedures, internal working standards, check lists etc to improve work procedures, standards for implementing a systematic work culture.
Control of work progress and deliverable issue schedules of discipline work.
Support project for tender activities (write-up of technical proposals, estimate of man-hours, schedules).
Status and work progress reporting and control of rework and man-hours.
Keeping records files up to date and maintain library for the job handled.
Requirements:
Qualifications:
Bachelor’s degree in Mechanical Engineering preferred.
Engineers with Diploma qualification coupled with extraordinary experience may be considered
Experience :
Candidates with varying degree of experience in Oil & Gas, Petrochemical, chemical and industrial plants and consistent career experience in the engineering department will be considered as follows :
Rotating Engineer - equipped with 5 to 7 years’ experience
Senior Engineer - - equipped with 8 to 10 years’ experience
Lead Engineer - equipped with 11 to 15 years’ experience
Principal Engineer - equipped with 16 to 20 years’ experience
Interested please send in resume to recruit@jgc.com.sg