Eni is a major integrated international oil and gas company based in Italy, with interests in 85 different countries, and employs approximately 79,000 people worldwide. Eni has Exploration & Production activities in Italy and other areas worldwide such as West & North Africa, US, South America, North Sea, Kazakhstan and Asia. In Indonesia, Eni participates in thirteen PSCs, including nine in Deep Water areas, with an active exploration and development program. To support its progressive growth and build the organizational capability, Eni Muara Bakau BV is looking for qualified personnel with high motivation, initiative and integrity to fill in the following positions:
1. Site Support Specialist – PDV15
Responsibilities :
To carry out the day to day administration of the contractual and related matters on Contracts, to ensure contractor compliance with the terms and conditions of the contract and to oversee and assist Project Teams in the management of Execution Contracts
Requirements :
• Bachelor Degree in Quantity Surveying or Engineering Discipline
• Minimum of 5 years experience of which a minimum of 3 years as a Contract Engineer involved in the preparation, negotiation and administration of a broad range of complex technical contracts/purchases with the attendant knowledge and experience of commercial, insurance and legal issues is essential.
• Experience in working directly/indirectly with an Oil and Gas company
2. X-tree Site Representative – PDV16
Responsibilities :
• Site inspection and Interfacing with the Contractor on Technical and Delivery issues.
• Ensuring Delivery of the Subsea Completion System (including all the Tree and Work Over Risers Tools) in line with the Project objectives, technical interfaces and requirements.
• Review of Contractors design of the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools) design and preparation of comment sheets
• Expediting of technical interfaces
• Daily site inspection and interfacing with contractor
• Daily reporting to SPS Work Package Lead and Xtree & WO Engineer
• Follow-up the detail engineering performed by the SPS Contractor relevant to the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools).
• Reviewing and commenting technical documentation produced by the Contractors (e.g. technical reports, specifications, procedures, drawings, etc) ensuring the implementation of the established procedures, applicable codes, COMPANY standards and specification, Contract, International standards and Engineering best practices;
• Resolving ongoing technical issues concerning all aspects of the Subsea Completion System, X-mas Tree System and Workover System (including all the Tree and Work Over Risers Tools);
• Monitoring and reporting technical progress to the SPS Work Package Leader and Xtree & WO engineer Manager;
• Ensure that all internal and external Interfaces (especially with Rig Contractor) are correctly managed by Contractor;
Witnessing of acceptance tests for all the the X-mas Tree System and Work Over System (including all the Tree and Work Over Risers Tools) Scope of Supply (FAT,EFAT, SIT)
• Support to offshore installation, commissioning and production start-up
Requirements :
• The job holder must have Engineering degree (Mechanical and Instrumentation Engineer).
• Experience in Project Engineering in a major oil and gas company for X-tree & Work Over System
• Not less than 7 years of working experience in oil & gas industry in Subsea Project.
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up)
3. Control System Site Representative – PDV17
Responsibilities :
• Selection of the best technical/economical solutions and products for the production and work over subsea instrumentation and control systems, ensuring overall design integrity and compliance with international standards, company guidelines and engineering best practices and system performance.;
• Site inspection and Interfacing with the Contractor on Technical and Delivery issues.
• Ensuring Delivery of the production and work over subsea instrumentation and control systems is in line with the Project objectives, technical interfaces and requirements.
• Review of Contractors production and work over subsea instrumentation and control systems design and preparation of comment sheets
• Expediting of technical interfaces
• Daily site inspection and interfacing with Contractor.
• Daily reporting to Control Systems and Umbilical Coordinator and Subsea SPS Work Package Leader.
• Witnessing of acceptance tests
• Support to offshore installation, commissioning and production start-up Follow-up the detail engineering performed by the SPS Contractor relevant to subsea production and work over subsea instrumentation and control systems.
• Reviewing and commenting technical documentation produced by the Subsea Control System Contractors (e.g. technical reports, specifications, procedures, drawings, etc.) and ensuring the implementation of the established procedures, applicable codes, company standards and specification, Contract, International standards and Engineering best practices; comments/concerns from Company and other Contractors are implemented or properly addressed.
• Reviewing and commenting technical documentation produced by the Installation Contractors (e.g. technical reports, specifications, procedures, drawings, etc.) and ensuring the implementation of the comments/concerns from Company and Subsea Control System Contractor are implemented or properly addressed.
Resolving ongoing technical issues concerning all aspects of subsea control equipment;
• Monitoring and reporting technical progress to the SPS Work Package Leader and Subsea Control Engineer.;
Ensure that all internal and external Interfaces (especially with FPU) are correctly managed by Contractor;
• Witnessing of acceptance tests for all the Production Control System Scope of Supply (FAT,EFAT, SIT, etc.) and close out any punch list.
• To attend and support to the offshore installation, commissioning and production start-up.
• Providing support and advise to the Company representative during offshore campaign related to the installation/testing/pre-commissioning/commissioning of Subsea Control System Equipment
Requirements :
• Electric / Electronic / Physic Engineering degree (preferably automation specialization).
Engineering degree (Electronic engineering, preferably automation specialization)
• The job holder must have an Electric / Instrument / Physic Engineering.
• Experience in Project Engineering in a major oil and gas company for Subsea System.
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects. (Offshore).
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• Not le than 3 years of instrumentation and automation experience (5 preferable).
At least 2 similar activities (subsea EPC Project follow-up)
4. Umbilical Site Representative – PDV18
Responsibilities :
• Site inspection and Interfacing with the SPS Contractor on HSE, Quality and Delivery issues
• Interfacing with the Umbilical Engineer and Installation Contractor;
• Ensuring Delivery of the subsea umbilical system in line with the Project objectives, technical interfaces and requirements.
• To review the Installation Contractors design documentation and drawing/layouts, reports, installation analysis, pre-commissioning procedures ensuring that Project objectives, industry standards and best practices for safety, reliability and cost are met;
• To review relevant subsea Contractors documents and drawings and provide installation related inputs;
• Expediting of relevant technical interfaces
• Daily reporting to Umbilical Engineer and SPS Package Leader
• Witnessing the Umbilical FAT and EFAT.
• Support to offshore installation, commissioning and production start-up at yard and offshore;
• Follow-up the detail engineering performed by the Installation Contractor relevant to subsea umbilical, distribution.
• Reviewing and commenting technical documentation produced by the Installation Contractors (e.g. layout, technical reports, specifications, procedures, drawings, etc) ensuring the implementation of the established procedures, applicable codes, COMPANY standards and specification, Contract, International standards and Engineering best practices;
• Resolving ongoing technical issues concerning all aspects of subsea umbilical system ;
• Monitoring and reporting manufacturing progress to the SPS Work Package Leader and Umbilical Engineer;
• Ensure that all internal and external Interfaces (especially with RFI & FPU) are correctly managed by Contractor;
• Support to offshore installation, pre-commissioning and production start-up/commission.
• Participate with installation Contractor for mobilization, load-out at site, onshore support, preparations for the campaign, transpooling, testing activities, laying, pre-commissioning and start-up/ commissioning of umbilical and distribution system;
• Participate in offshore installation and liaise with both Umbilical suppliers technician on-board and the installation contractor to ensure installation contractor is following the installation guidelines provided by umbilical supplier and also following approved installation procedure prepared by installation Contractor
Requirements :
• Engineering degree (Mechanical engineering, preferably electronic specialization)
• The job holder must have Mechanical/Electrical/Instrument Engineering.
• Experience in Project Engineering in a major oil and gas company for Umbilical & Subsea Control System
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up and installation)
5. Manifold Site Representative – PDV19
Responsibilities :
• To supervise the onshore fabrication of manifolds and SSIVs ensuring that contractor works are performed according to project specifications, budget and schedule and respecting all the relevant QA standards and HSEQ procedures and regulations
• To learn and became confident with all COMPANY standards and Project Specification in order to verify Contractor compliance;
• To ensure that the SSIV, manifolds and ROV tools technical interfaces with other systems or activities of the Project are considered by the Contractor at all times;
• Perform Site inspection and interfacing with the Contractor;
• To ensure delivery of the SSIV, manifolds and ROV tools with the Project schedule and objectives.
• To assist the preparation of user manual and installation procedure by Contractor and assist installation campaign.
• To interface with COMPANY Project Interface Engineer to manage and expedite all the SPS Contractor interfaces with other Project Contractors.
• Follow-on the construction activities of the discipline supporting the Site Representative or the Inspector
• Attendance during construction and installation activates at site.
• Assure compliance of SPS Contractor with job standards and specifications for the discipline.
• Technical follow-on/troubleshooting during construction, installation, commissioning and start-up
• On site assistance (drilling rig, construction vessel, FPU) to Company, with the follow up of the Vendor personnel;
• Support the SPS Work Package Leader in the expediting and inspection at Vendor site during the construction and offshore installation assistance.
• To supervise manifold and SSIV installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Engineering degree (Mechanical & Instrumentation engineering).
• Experience in Project Engineering in a major oil and gas company for Subsea System (SSIV, Manifolds & ROV Tie-in system)
• Not less than 7 years of working experience in oil & gas industry in Subsea Projects
• Not less than 5 years of experience of working with contractors and supervising the contractors.
• At least 2 similar activities (subsea EPC Project follow-up)
6. Onshore Detailed Engineering Coordinator – PDV20
Responsibilities :
• To manage all engineering design activities related to the Onshore Receiving Facilities. The activities include managing a multidisciplinary engineering team during the detailed engineering and project execution phases, ensuring that the design meets Company requirements, project objectives for cost, schedule, safety and environmental impact aspects.
• Provides technical and project management support to eni Muara Bakau BV management
Requirements :
• Bachelor Degree in Engineering or higher
• Fluent in English both speaking and writing
• Minimum of 12 years Oil & Gas Industry experience and at least 5 years in project management experience
• Minimum of 5 year experience in onshore pipeline design and/or construction, 5 year experience in onshore plant design and/or construction
• Minimum 3 years of experience of working with contractors and supervising the contractors in engineering activities
• Good knowledge of industry standards regarding onshore pipelines, piping plan and civil design.
• Good knowledge and understanding of the contractual terms, conditions and requirements and the particular Scope of Work to be performed by the all the Project Contractors and onshore package in particular
• Experience in reviewing and commenting detailed engineering design and other related documentation (i.e. technical specifications, SOW, procedures, reports, drawings…).
7. Installation Coordinator – PDV21
Responsibilities :
• To supervise offshore platform, sea-line, flowline and riser systems installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required. • Timeliness and accuracy of installation control information provided, including: cost control information, executed works compliance to project technical specifications, work progress certification
• Monitoring installation activities controlling that their execution is in line with project plans and highlighting any possible deviations suggesting possible solutions
• Verifying installation works compliance with project specifications, company procedures (including HSEQ)
• Preparation of daily installation reports
• Contractors daily progress report review and acceptance
• Managing supervision team verifying that all the installation activities are performed according to specifications
• Interfacing with the installation contractor during offshore operations
Requirements :
• The job holder must have Engineering degree.
• Experience in Project Engineering in a major oil and gas company for installation offshore facilities.
• Not less than 7 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore installation.
• Good knowledge and understanding of the electrical for offshore development such as:
• Contracting (Generic) • Specialist Knowledge: Engineering knowledge in the specialist activity
• Construction & Installation: Integration Testing, Installation, Offshore Installation Supervision
8. Topside Construction Specialist – PDV22
Responsibilities :
• To be responsible of the construction site and act as Deputy of the Topsides Construction SPT, with particular respect to team management, HSE, construction and quality follow up.
• Timeliness and efficiency of construction works execution
• Managing a team of 8-14 team members (inspectors, dcc, field engineers)
• Achieving project quality standards
• Assuring an effective construction physical progress control
• Applying of HSEQ local norms and company standards
• Meeting HSEQ targets.
• Liaising with Contractor management and third parties (class, MWS) and representing Company during official occurrences.
• Continuous reporting of actual site situation to management, by all the requested modalities (presentations, speeches etc).
Requirements :
• Experience in construction and site management
• Not less than 6 years of working experience in shipbuilding yards or oil & gas industry.
Knowledge, Technical or Professional Skills:
• Economics General: Economics Planning and Control
• Contracting: Variations and Claim Resolution
• Organization Processes: Work team management methodology, Documentation management, Site Management, Contract Management
•Construction & Installation: Site Construction, Installation, Plant construction, Control system knowledge, Inspection, control and testing techniques
• Good communication skills at all levels.
• Leadership and experience of working in multi-National environment
9. Topside Material Management Specialist – PDV23
Responsibilities :
• Ensure material integrity from Contractor receiving at Yard to handover to Company.
• Ensure, in coordination with discipline site supervisors that material and equipment are properly preserved according to project requirements from receiving to Yard to Handover to Company.
• Control Contractor preservation plan and report any deviation from Project requirements.
• Follow up daily warehousing activities, scheduled and unscheduled
• Attend QC inspections called by contractor, representing ENI function at the Contractors construction locations within the project
• Verify material feasibility aspects related material availability versus construction schedule to Topside site superintendent.
• Verify Contractors expediting and shipping status and weekly report to Topside site superintendent, advise timely possible constrains that could affect the schedule in terms of material availability at Yard or delay in shipping and clearance activities.
• In agreement with ENI Site HSE officer and superintendent, stop further work when major/critical HSE deviations are detected
Requirements :
• The job holder must have an Engineering or technical degree, preferably in Mechanical Engineering.
• Experiences in Oil and gas material management
• Not less than 8 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 5 years of experience of working with contractors and supervising the contractors in material management activities.
• Working in a prior similar role and experience in material material management software GEMAPI will be beneficial
• Good knowledge of Microsoft office: Word, excel, power point for an effective site reporting.
• Knowledge of Local custom and shipping procedures.
• Confidence with material international standards.
10. Piping Supervisor Topside – PDV24
Responsibilities :
• Engineering supervision of mechanical work completion by contractors according to Method Statement.
• Control that construction schedule is followed by contractors.
• Control construction plans and quality control.
• Technical acceptance of completed mechanical work and facilities and as-built documentation
Requirements :
• The job holder must have an Engineering or technical degree.
• Experience in Project Engineering in a major oil and gas company
• Not less than 7 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 3 years of experience of working with contractors and supervising the contractors.
11. Mechanical Supervisor Topside – PDV25
Responsibilities :
To review and approve the specification, design and supply (by contractors) of static mechanical equipment (vessels and piping) in onshore/offshore production facilities, ensuring that it meets Project objectives, industry standards and best practice for safety, reliability and cost
Requirements :
• The job holder must have an Engineering or technical degree, preferably in Mechanical Engineering.
• Experience in Project Engineering in a major oil and gas company
• Not less than 7 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 5 years of experience of working with contractors and supervising the contractors in Mechanical Engineering activities.
• Working in a prior similar role would be beneficial.
12. Electrical Supervisor Topside – PDV26
Responsibilities :
To review and approve the specification, design and supply (by contractors) of electrical equipment and systems in floating production facilities, ensuring that it meets project objectives, industry standards and best practice for safety, reliability and cost
Requirements :
• The job holder must have an Engineering or technical degree, preferably in Electrical Engineering.
• Experience in Project Engineering in a major oil and gas company
• Not less than 5 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 3 years of experience of working with contractors and supervising the contractors in electrical engineering activities.
• Working in a prior similar role would be beneficial.
13. LQ Construction Specialist – PDV27
Responsibilities :
• Timeliness and efficiency of construction works execution
• Managing a team of 8-14 team members (inspectors, dcc, field engineers)
• Achieving project quality standards
• Assuring an effective construction physical progress control
• Applying of HSEQ local norms and company standards
• Meeting HSEQ targets.
• Liaising with Contractor management and third parties (class, MWS) and representing Company during official occurrences.
• Continuous reporting of actual site situation to management, by all the requested modalities (presentations, speeches etc).
• Quality control on construction activities: in cooperation with QA/QC coordinator, assuring that inspecting and MC activities are developed according to the schedule and company/project procedures. Identification and adoption of the correct HSEQ standards according to company standards and local norms and legislation.
• Construction planning and monitoring (schedule, cost and compliance of work to project specifications): monitor and control of actual erection progress to ensure the respect of contractual milestones, check and validate short /long term construction schedules reviews.
• Strict follow up, included documentation review and in cooperation with MWS of all erection/integration activities.
• Contractor management (including construction work troubleshooting):
VOR management, included evaluation of impact of modifications on the schedule and on the budget.
• Team leadership: managing Company construction site personnel.
• Site budgeting
• Reporting to project management potential criticalities in terms of construction, engineering and materials receiving.
• Direct management of resources assigned to the site (bureaucracy, approvals).
Requirements :
• The job holder must have an Engineering degree
• Experience in construction and site management
• Not less than 8 years of working experience in shipbuilding yards or oil & gas industry.
14. Material Management Specialist LQ – PDV28
Responsibilities :
• Ensure material integrity from Contractor receiving at Yard to handover to Company.
• Ensure, in coordination with discipline site supervisors that material and equipment are properly preserved according to project requirements from receiving to Yard to Handover to Company.
• Control Contractor preservation plan and report any deviation from Project requirements.
• Follow up daily warehousing activities, scheduled and unscheduled
• Attend QC inspections called by contractor, representing ENI function at the Contractors construction locations within the project
• Verify material feasibility aspects related material availability versus construction schedule to LQ site representative.
• Verify Contractors expediting and shipping status and weekly report to LQ site representative, advise timely possible constrains that could affect the schedule in terms of material availability at Yard or delay in shipping and clearance activities.
• In agreement with ENI Site HSE officer and superintendent, stop further work when major/critical HSE deviations are detected
Requirements :
• The job holder must have an Engineering or technical degree, preferably in Mechanical Engineering.
• Experience in Oil and gas material management
• Not less than 8 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 5 years of experience of working with contractors and supervising the contractors in material management activities.
• Working in a prior similar role and experience in material material management software GEMAPI will be beneficial
• Good knowledge of Microsoft office : Word, excel, power point for an effective site reporting.
• Knowledge of Local custom and shipping procedures.
• Confidence with material international standards.
15. Structural Supervisor HULL – PDV29
Responsibilities :
• Experienced with ERP/MRP systems
• Knowledge of subsea system, FPU, ORF and offshore operations are desired
• Pre-commissioning, commissioning and start-up experienced
• Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard
Requirements :
• Not less than 7 years of working experience in oil & gas industry, at least five years of involvement in large EPCI projects
• Experience with node structures
16. Material Management Specialist HULL – PDV30
Responsibilities :
•Ensure material integrity from Contractor receiving at Yard to handover to Company.
•Ensure, in coordination with discipline site supervisors that material and equipment are properly preserved according to project requirements from receiving to Yard to Handover to Company.
•Control Contractor preservation plan and report any deviation from Project requirements.
•Follow up daily warehousing activities, scheduled and unscheduled
•Attend QC inspections called by contractor, representing ENI function at the Contractors construction locations within the project
•Verify material feasibility aspects related material availability versus construction schedule to Hull site superintendent.
•Verify Contractors expediting and shipping status and weekly report to Hull site superintendent, advise timely possible constrains that could affect the schedule in terms of material availability at Yard or delay in shipping and clearance activities.
•In agreement with ENI Site HSE officer and superintendent, stop further work when major/critical HSE deviations are detected
Requirements :
• The job holder must have an Engineering or technical degree, preferably in Mechanical Engineering.
• Experience in Oil and gas material management
• Not less than 8 years of working experience in oil & gas industry, both offshore and onshore.
• Not less than 5 years of experience of working with contractors and supervising the contractors in material management activities.
• Working in a prior similar role and experience in material material management software GEMAPI will be beneficial
• Good knowledge of Microsoft office : Word, excel, power point for an effective site reporting.
• Knowledge of Local custom and shipping procedures.
• Confidence with material international standards.
17. Subsea Structure Installation Superintendent – PDV31
Responsibilities :
• To support the COMPANY Development Team during Project Execution Phase in the engineering, design, fabrication and testing (performed by Contractor) of subsea structure system (Manifold, SSIV, PLET, FLET etc), ensuring that Project requirements, industry standards and best practices for safety, reliability and cost are met;
• To ensure delivery of the subsea structure system (including connection system and related foundations) in line with the Project objectives;
• To review the specification, design and supply (performed by Contractor) of the subsea structure System (including tie in/connection system), ensuring that Project objectives, industry standards and best practices for safety, reliability and cost are met;
• To ensure the subsea structure system performance, install ability and operability;
• To ensure that the subsea structure system technical interfaces with other systems or activities of the Project are considered by the Contractor at all times;
Requirements :
• The job holder must have Mechanical/Civil/Ocean engineering degree.
• Experience for offshore Subsea Structure fabrication and Installation.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 7 years of experience of working for offshore installation.
• Good knowledge and understanding of the offshore installation activities such as
• Integration Testing, Installation, Offshore Installation Supervision
• Data Books, Operation & Decommissioning Manual, Close-Out Report Preparation
• Good abilities to read, understand, interpret and write reports and documentation
18. Fabrication & Construction Site Representative (Risers & Flexible) – PDV32
Responsibilities :
To supervise fabrication/manufacturing activities (Flexible & Riser Pipe), monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Mechanical / Ocean engineering degree.
• Experience supervising fabrication activities for flexible and riser.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for flexible manufacturing activities.
19. Fabrication & Installation (Flexible) – PDV33
Responsibilities :
•To supervise offshore risers and flexible flow-line systems construction and installation activities, starting from detailed design up to commissioning and start-up, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required.
• Timeliness and accuracy of construction and installation control information provided, including: cost control information, executed works compliance to project technical specifications, work progress certification
• Monitoring construction and installation activities controlling that their execution is in line with project plans and highlighting any possible deviations suggesting possible solutions
• Verifying construction and installation works compliance with project specifications, company procedures
Requirements :
• The job holder must have Engineering degree.
• Experience in Project Engineering in a major oil and gas company for installation offshore facilities specialized in Flexible flow lines
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore construction and installation for flexible flow lines.
• Good knowledge and understanding of the offshore construction and installation activities related the flexible flow-lines
• Good abilities to read, understand, interpret and write reports and documentation
20. Fabrication & Construction Site Representative (Rigid Pipeline) – PDV34
Responsibilities :
To supervise fabrication/manufacturing activities (Rigid Pipeline), monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Mechanical / Ocean engineering degree.
• Experience supervising fabrication activities for flexible and riser.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for flexible manufacturing activities.
21. Company Representative (Rigid) – PDV35
Responsibilities :
To supervise offshore rigid pipeline installation activities (24”, 4” and 12”), monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Mechanical/Ocean engineering degree.
• Experience for installation offshore activities.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore installation.
22. Company Representative (Umbilical & Flexible) – PDV36
Responsibilities :
To supervise offshore flexible and umbilical installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Mechanical/Ocean engineering degree.
• Experience for pipeline installation offshore activities for Flexible Pipe & Umbilical.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore installation.
23. Company Representative (Subsea Structures) – PDV37
Responsibilities :
To supervise offshore subsea structure (Manifold, SSIV, PLET, FLET) installation activities, monitoring contractor performance, assuring the application of all the relevant HSEQ and QA procedures, and providing technical support as required
Requirements :
• The job holder must have Mechanical/Ocean engineering degree.
• Experience for pipeline installation offshore activities for Subsea Structure Installation.
• Not less than 10 years of working experience in oil & gas industry.
• Not less than 5 years of experience of working for offshore installation.
24. Commissioning Leader – PCO02
Responsibilities :
• To manage the development project activities with focus on construction, onshore and offshore commissioning and logistic issues of new oil/gas production facilities, ensuring that onshore and offshore commissioning phase and start-up operations of Jangkrik complex project are conducted in safe, effective and efficiently manner with meeting the company target and to the satisfaction of all parties.
• To support all operation readiness activities and assurance review from initial concept through to project sanction, and possibly through project execution, ensuring that the design meets project objectives for cost, schedule, safety and environmental impact. Assure all operation aspects and risk opportunities to optimize the construction activities in the field, have been address and mitigate the risk
Requirements :
• At least 10 years of experience in the Oil & Gas industry in both onshore and/or offshore facilities
• At least 5 years of experience in offshore commissioning of oil/ gas field development projects
• Previous Upstream Engineering Floating Production Unit commissioning experience would be advantage
• Experienced in operation for offshore gas facilities is beneficially o Experienced with ERP/MRP systems
• Knowledge of subsea system, FPU, ORF and offshore operations are desired
• Pre-commissioning, commissioning and start-up experienced
• Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard
25. ORF & PL Commissioning Coordinator – PCO01
Responsibilities :
• Overall quality of ORF & PL commissioning activities definition, planning and execution
• Respect of project cost and time targets for commissioning and readiness
• Managing all ORF & PL pre-commissioning and commissioning activities, meeting the planned target
• Development of pre-commissioning and commissioning plan and procedures, together with discipline engineering and operation personnel
• Managing ORF& PL commissioning team activities
• Managing contracts relevant to the ORF&PL commissioning and start up vendors
• Ensuring that adequate, competent commissioning personnel are available to undertake the work
• Ensuring that all contractors are competent and fully knowledgeable of project HSEQ procedures
• Endorsing official documents, works progress certificates, handover certificates etc
• Providing operations start up support and assistance in ORF and PL
• Coach and transfer knowledge to local engineers under his/her responsibility
Requirements :
• At least 5 years of experience in the Oil & Gas industry in both onshore and/or offshore facilities
• At least 3 years of experience in ORF& PL commissioning of oil/ gas field development projects
• Previous Upstream Subsea Onshore Receiving Facilities, Risers and Flow line Installation and commissioning experiences would be advantage
26. FPU Commissioning Coordinator – PDV38
Responsibilities :
• To support and the coordination of the development project activities relevant to the Floating Production Unit project with focus on construction, commissioning and logistic issues of new oil/gas production facilities, ensuring that commissioning phase and start-up operations of FPU are conducted in safe, effective and efficiently manner with meeting the company target and to the satisfaction of all parties.
• To support all operation readiness activities and assurance review from initial concept through to project sanction, and possibly through project execution, ensuring that the design meets project objectives for cost, schedule, safety and environmental impact. Assure all operation aspects and risk opportunities to optimize the construction activities in the field, have been address and mitigate the risk
Requirements :
• At least 10 years of experience in the Oil & Gas industry in both onshore and/or offshore facilities
• At least 5 years of experience in offshore commissioning of oil/ gas field development projects
• Previous Upstream Engineering Floating Production Unit commissioning experience would be advantage
• Experienced in operation for offshore gas facilities is beneficially
• Overall quality of commissioning activities definition, planning and execution
• Respect of project cost and time targets for commissioning and readiness
• Managing all pre-commissioning and commissioning activities, meeting the planned target
• Development of pre-commissioning and commissioning plan and procedures, together with discipline engineering and operation personnel
• Managing commissioning team activities
• Managing contracts relevant to the commissioning and start up vendors
• Ensuring that adequate, competent commissioning personnel are available to undertake the work
• Ensuring that all contractors are competent and fully knowledgeable of project HSEQ procedures
• Endorsing official documents, works progress certificates, handover certificates etc
• Providing operations start up support and assistance
27. SURF Commissioning Coordinator – PCO03
Responsibilities :
• To support and the coordination of the development project activities relevant to the SURF project with focus on detail engineering, construction, commissioning and logistic issues of new oil/gas production facilities, ensuring that commissioning phase and start-up operations of SURF are conducted in safe, effective and efficiently manner with meeting the company target and to the satisfaction of all parties.
• To support all SURF commissioning from initial concept through to project sanction, and possibly through project execution, ensuring that the SURF design meets project objectives for cost, schedule, safety and environmental impact. Assure all operation aspects and risk opportunities to optimize the construction activities in the field , have been address and mitigate the risk
Requirements :
• At least 5 years of experience in the Oil & Gas industry in both onshore and/or offshore facilities
• At least 3 years of experience in SURF commissioning of oil/ gas field development projects
• Previous Upstream Engineering Subsea Production System, Risers and Flow line Installation commissioning experience would be advantage
28. Instrument & Control Engineer – FAC11
Responsibilities :
• From the beginning the Candidate will be involved in all engineering activities related to instrumentation, automation and telecommunication in onshore/offshore facilities
• Candidate will be initially supported by a Senior I&C engineer that will follow him during the first “familiarization” period.
• As soon as the candidate will be more confident and independent with his role he shall review and approve the specification, design and supply (by contractor) of instrumentation and control in onshore/offshore facilities, ensuring that it meets project objectives, industry standards and the best practices for safety, reliability and cost.
• Candidate must be willing and able to international travels.
Requirements :
• Degree in Electrical, Electronic preferable.
• Native Language Indonesian, Fluent in English
• At least 2 years in Oil /& Gas
29. Mechanical Engineer (Static) – FAC09
Responsibilities :
To support the development team in all aspects of static and rotating equipment, such as complete power generation systems, compressor stations, pumps, turbines, pressure vessels, pig traps and other equipment design (including the relevant auxiliaries and utilities) according to engineering best practices and international standards, for floaters and offshore platforms application.
Requirements :
• Degree in Mechanical Engineering or equivalent
• Fluent in English
• At least 5 years machinery engineer experience
30. Electrical Engineer – FAC14
Responsibilities :
• To review and approve the specification, design and supply (by contractors) of electrical equipment and systems in onshore/offshore production facilities, ensuring that they meet schedule, project objectives, industry standards and best practice for safety, reliability and cost.
• Selection of best technical / economical solutions and products for power systems
• Power systems overall design integrity and compliance with international standards, company guidelines and engineering best practices
• To review and approve electrical design documents such as Electrical drawings, specifications, calculations, charts and graphs
• To provide technical evaluation of power systems
• To provide power systems execution technical follow-up and assistance to commissioning
• To liaise with others in the design team
Requirements :
• Degree in Electrical Engineering
• Fluent in English
• 7 years of Oil and Gas Industry experience
• 5 years of Electrical Engineering experience
31. SURF & Network Technologies Coordinator – FAC15
Responsibilities :
• Ensure the subsea & control met the best practice standard specification and completed in a specific timeline.
• Ensure that manifold & connection met best practice standard specification and completed in a specific timeline.
• Ensure that subsea tree met the best practice standard specification and completed in a specific timeline.
• Ensure that riser and flowline met best practice standard specification and completed in a specific timeline
Requirements :
•Bachelor in Engineering or Technical Science, preferably in Marine
• Tertiary degree in Petroleum or Chemical Engineering is Preferable.
• 8-10 years experience in the oil and gas industry of which at least 7 years is spent in an off-shore oil & gas industry with extensive experience of subsea projects (engineering, fabrication and/or construction); some experience of topside modifications are preferable.
32. FPU Detail Eng. Coordinator – FAC16
Responsibilities :
To manage all engineering design activities related to the EPCI-1 (FPU – Floating Production Unit) Package; The activities include managing a multidisciplinary engineering team during the detailed engineering and project execution phases, ensuring that the design meets Company requirements, project objectives for cost, schedule, safety and environmental impact.
Requirements :
• The job holder must have an Engineering or technical degree;
• Experience in Project Engineering in a major oil and gas company;
• Not less than 5 years of working experience in oil & gas industry;
• Not less than 3 years of experience of working with contractors and supervising the contractors in engineering activities;
33. JAU Project Control Coordinator – PSV04
Responsibilities :
•To develop and maintain the overall project plan and master schedule based on input from project technical, commercial functions and contractors:
•Support the project services manager monitoring the project progress.
•Monitor contractor progress against plan and highlight deviations to project management through regular progress reports.
Requirements :
• The candidate must have degree in Engineering discipline, experience in Project Controls in a major oil and gas company, not less than 5 years of working experience in oil & gas industry, both offshore and onshore, not less than 3 years of experience of working in a prior similar position , not less than 3 years of experience of working with contractors and supervising the contractors, fluent in English Language, significant computer skills, specifically in all MS Office tools, Visio, etc., good written and verbal communication skills with the ability to communicate at all organizational levels, successful track record in similar roles on very large international projects
34. Cost Estimator – PSV03
Responsibilities :
To develop project data and document control procedures and to manage all project data and documentation, both electronic and hard copy, in line with agreed procedures
Requirements :
The candidate must have an Engineering or technical degree, experience as Cost Estimator in a major oil and gas company, not less than 5 years of working experience in oil & gas industry, both offshore and onshore
35. Pipeline WP Leader – PDV39
Responsibilities :
To ensure the management, execution and delivery of in filed pipelines from FEED through detailed engineering up to procurement and installation, ensuring achievement of project cost, schedule, quality and HSES targets
Requirements :
The candidate must have a degree in Engineering, experience in Project Engineering in a major oil and gas company for Offshore pipelines and facilities, not less than 10 years of working experience in the oil and gas industry and not less than 5 years of experience of working with contractors and supervising the contractors in pipeline design and construction. Working in a prior similar role would be beneficial.
36. Flow Assurance Engineer – FAC17
Responsibilities :
• To lead and coordinate the development of flow assurance deliverables on a study, e.g. multiphase simulation study (based on the available well fluid composition), philosophy documents, Basis of Design documents, operating procedures, study reports, design assurance H41;
• To interact with internal Production Chemistry personnel in order to check the required fluid characterizations, Chemical treatment recommendations, including paraffin and hydrate inhibitors and incorporate chemicals and operational constraints within the models;
• To interact with reservoir specialists in order to contribute to the integrated Flow Assurance studies, incorporating lifetime reservoir and network simulations;
• For each feasible development scheme, to deliver steady-state and dynamic simulations of the multiphase flowlines and trunklines in the field area and from the field to shore. Studies to include full consideration of all flow assurance issues and input to operational requirements;
• To create and keep updated the design premises along the project with assumptions and result of the flow assurance studies, thereby contributing to the assurance of technical integrity of future facilities;
• To lead and coordinate external contractor studies related to multiphase simulation;
• To contribute to the generation of new technologies through innovative application projects in the Flow Assurance discipline;
Requirements :
• Degree in Chemical Engineering, Mechanical or equivalent
• At least 5 years of Oil and Gas experience, mainly in process and flow assurance.
• Have been involved in any deep water projects.
• Strong interpersonal and communication skills;
• A cooperative and helpful attitude to colleagues and people in the team;
• Excellent analytical and problem solving skills;
• Willingness and ability to travel in order to fulfill the responsibilities of this position;
Interested applicants please send your CV to:
recruitment@eniindonesia.co.id
(Please mention the position applied & position code on the email subject)
Please note that applications may not be reviewed if received after 30 July 2014. We regret that only shortlisted candidates will be notified.
The post ENI Recruitment various positions appeared first on Job In Oil and Gas.