DRILLBITS – July 2014
This Month’s Articles
Octane Energy’s Jared Blong Addresses US Congressional Subcommittee
IADC, Arctic Council Task Force Discuss Responsible Drilling
IADC Jackup Committee Considers New Projects
European Operations Forum Highlights Offshore Directive, Well Control Standards
IADC Issues Federal Regulatory Summary for Onshore Operations
Mexican Marine Pollution Law Now in Force
ISO Approves Projects to Develop New Standards for Offshore Containers
Accreditation Updates
Safety Alerts
Rigs Receive ISP Certificates
IADC Welcomes New Members
Sign Up For the DRILLBITS Email Newsletter!
Get DRILLBITS By Email
Octane Energy’s Jared Blong addresses US Congressional Subcommittee
Jared Blong, past Chairman of the IADC Permian Basin Chapter, addressed the US House Subcommittee on Agriculture, Energy and Trade in June. IADC arranged the testimony, which addresses impediments facing the energy sector.
Jared Blong, CEO and President of Midland, Texas-based Octane Energy and past Chairman of the IADC Permian Basin Chapter, recently addressed the US House Committee on Small Business Subcommittee on Agriculture, Energy and Trade. IADC arranged the testimony. Witnesses at the subcommittee’s 26 June hearing, titled “The New Domestic Energy Paradigm: Downstream Challenges for Small Energy Businesses,” focused on the need to reduce impediments facing the energy sector and lift the ban on crude oil exports as a part of a comprehensive energy policy.
The hearing examined the potential mismatch between the supplies of oil produced and the capacity of the refining sector to turn domestic crude oil into economically useful products. Committee members examined the impact this imbalance has on small businesses in the energy sector.
“I believe, as many do, that America has entered a new era of energy stewardship,” Mr Blong said. “Through technological breakthroughs in precision drilling and completion techniques, we can develop resources previously thought unreachable, unattainable and uneconomic. And we can do so while maintaining the highest degree of environmental stewardship, safety and community compassion.”
IADC encourages members to participate in Congressional hearings. For more information, contact Bill Tanner, IADC VP of Policy, Government & Regulatory Affairs, at bill.tanner@iadc.org.
IADC, Arctic Council Task Force Discuss Responsible Drilling
IADC highlighted considerations to ensure responsible future drilling operations in the Arctic at the June meeting of the Arctic Council’s Task Force on Offshore Pollution Prevention (TFOPP). Steve Kropla, IADC Executive VP of Operational Integrity, provided the task force with details on the IADC HSE Case Guidelines and other IADC activities related to well control and training. He recommended that the group evaluate and continuously improve spill prevention technology, containment and response infrastructure specific to drilling in the Arctic environment. He also emphasized the importance of ensuring that a mechanism is in place to share oil spill prevention, containment and response technology on a global basis.
The Arctic Council is a high-level intergovernmental forum that primarily addresses environmental protection and sustainable development issues in the Arctic region. The council is made up of representatives from Canada, Denmark, Finland, Iceland, Norway, Russia, Sweden and the US, as well as indigenous groups from various Arctic nations.
Reporting to the Arctic Council, TFOPP is charged with identifying how the Arctic Council can contribute to marine oil pollution prevention in the Arctic by recommending a concrete plan of action and developing cooperative arrangements to implement the action plan. Among the group’s proposals discussed at the meeting, held in Ottawa, Canada, was the formation of an Arctic Regulators’ Forum, similar in purpose to the International Regulators’ Forum.
For more information, please contact Steve Kropla at steve.kropla@iadc.org.
IADC Jackup Committee Considers New Projects
Experts from the global drilling industry are invited to join the revitalization of the IADC Jackup Committee, led by Chairman Mike Dowdy, Rowan Companies. Among the projects the group is considering are standards and guidance for moving jackup rigs onto and off location and refinements of the ISO Jackup Site Assessment Standards. For more information about the committee and these projects, please contact Alan Spackman, VP of IADC’s Offshore Division, at alan.spackman@iadc.org. To RSVP for the next committee meeting, scheduled for 30 October at the IADC office in Houston, please contact Holly Shock, Committee Coordinator, at holly.shock@iadc.org. More information about the Jackup Committee can also be found online here.
European Operations Forum Highlights Offshore Directive, Well Control Standards
IADC held a European Operation Forum meeting in Brussels on 2 July. Representatives from the EU and Norwegian regulators participated, as did representatives from the EU Commission and drilling contractors working in the EU and Norway.
The EU regulators offered presentations covering current issues, such as the NSOAF Audit Report and HSE’s KP4 initiative. The EU Commission representative discussed the current status of the EU Offshore Directive and common incident reporting format.
The drilling contractors made a brief presentation on the challenges they face operating in EU countries and Norway. Among the issues raised were:
IADC WellCAP versus IWCF well control standards;
Harmonization amongst regulators in the North Sea area to ensure easier transfer of rigs across boundaries;
Alignment on what competency standards are required;
Alignment of days on/off in UK, Denmark and Netherlands; and
Difference in requirement of size of helidecks in Norway and the rest of the North Sea.
The staff representing IADC made presentations on new initiatives undertaken by the association.
For more information about the European Operations Forum, please contact Jens Hoffmark, IADC Regional VP of European Operations, at jens.hoffmark@iadc.org.
IADC Issues Federal Regulatory Summary for Onshore Operations
IADC has issued its latest Federal Regulatory Summary, available on the association’s website here. Released semi-annually, the report details federal regulatory actions that could impact onshore drilling. The 30 June edition includes updates related to the national fire codes, hydraulic fracturing on federal/Indian lands, combustible dust, process safety management and prevention of major chemical accidents, among other topics.
For more information, please contact Rhett Winter, IADC Director of Onshore Operations, at rhett.winter@iadc.org.
Mexican Marine Pollution Law Now in Force
The Law on Spills in Mexican Maritime Zones (Ley de Vertimientos en las Zonas Marinas Mexicanas) came into force on 16 July. The law seeks to control and prevent pollution or alteration of the sea caused by spillages deposited in Mexican maritime zones, according to the zones governed under the Federal Sea Law. Specifically, the law will determine the events that will be regarded as spills or dumping in relation to ships (vessels), aircraft, platforms and other constructions or buildings.
The following events will be penalized if they are carried out without a permit issued by the Maritime Ministry, which is also authorized to apply and interpret the Convention on the Prevention of Maritime Pollution by Dumping of Wastes and Other Matter 1972:
The discharge, disposal, release or introduction into Mexican maritime zones – whether deliberate or accidental – of waste or other materials, including alien ballast water from vessels, aircraft, platforms or other structures;
The storage of waste or other materials on the seabed or subsoil thereof from vessels, aircraft, platforms or other structures;
The discharge of any organic material in order to attract biological species that are not intended to be fished;
The placement of materials or objects of any kind in order to create artificial reefs, docks, jetties, breakwaters or other structures;
The deliberate sinking or abandonment of vessels, aircraft, platforms or other structures, as well as those derived therefrom, for the sole purpose of deliberate disposal thereof; and
The re-suspension of sediment – consisting of the return of deposited sediment into a state of suspension in the water body – by any method or procedure that results in sedimentation.
The implication of this law for drilling contractors is yet to be determined.
The full text of the law, in Spanish, can be accessed here.
ISO Approves Projects to Develop New Standards for Offshore Containers
The International Organization for Standardization (ISO) has approved projects to develop three new standards for offshore containers:
NP 10855-1 Offshore containers – Part 1: Design, manufacture and marking
NP 10855-2 Offshore containers – Part 2: Lifting sets
NP 10855-3 Offshore containers – Part 3: Periodic inspection examination and testing
The projects are being undertaken under the auspices of TC67/SC7. Persons interested in participating in the development of these standards should contact their national standards bodies. If you need assistance identifying your national standards body, please contact Alan Spackman, IADC VP of the Offshore Division, at alan.spackman@iadc.org.
Accreditation Updates
RigPASS
Almansoori Safety Services, UAE (conditional)
Benchmark Petroleum Institute, USA (full)
DIT
Al-Kebar Petroleum Services, Saudi Arabia (conditional)
Guelo Safety Training, Ecuador (conditional)
Institute of Drilling and Petroleum Engineering, Nigeria (conditional)
WellCAP
RST Global Solutions, Sugar Land, TX
Safety Alerts
For the latest safety alerts, visit www.iadc.org/safety-alerts
Alert 14-19: Dropped object results in near-miss
Alert 14-20: Hand tool left on CCU results in potential dropped object
Alert 14-21: Lack of communication/failure to stop job results in fatality
Rigs Receive ISP Certificates
For certificates received since last LTI (in years):
Caspian Drilling Company Ltd: Dada Gorgud (5);
Pacific Drilling: Pacific Mistral (3);
PV Drilling: PV Drilling 1 (7), PV Drilling 11 (1);
Songa Offshore: Songa Mercur (4).
For certificates received since last recordable incident (in years):
Parker Drilling Company: Rig 605 (1);
Unit Drilling Company: Rigs 20 (1), 302 (1), 304 (1);
Unit Texas Drilling LLC: Rig 307 (2).
New IADC Members
IADC welcomes 26 new members:
ABSOLUTE CONTROL LLC,Waller, TX, USA
AL FARIS EQUIPMENT RENTALS LLC, Dubai, UAE
ALMAJD INDUSTRY FOR TRAINING, Jeddah-Holy Makkah, Saudi Arabia
ARBRIT SAFETY AND ENGINEERING SOLUTIONS PVT LTD, Kochi, Kerala, India
BLUEGRACE LOGISTICS-LOUISIANA, Lake Charles, LA, USA
BREUER-MOTOREN GMBH & CO KG, Bochum, NRW, Germany
BUFETE CORPORATIVO DE CAPACITACION Y SERVICIOS PROFESIONALES DEL SURESTE SC, Villahermosa, Centro, Tabasco, Mexico
CENTURY INTERNATIONAL OILFIELD EQUIPMENT LLC, Sharjah, UAE
DEEPWATERS OFFSHORE AND ENERGY CONSULTANTS LTD, Bridge of Don, Aberdeen, UK
DONGYING WEIMA PETROLEUM DRILLING TOOLS CO LTD, Dongying, Shangdong Province, China
DOWNHOLE PRODUCTS, Houston, TX, USA
GLOBAL RESOURCES, West Perth, WA, Australia
GREEN VALLEY OIL SERVICES, Cairo, Egypt
HOLLAND STORES OILFIELD SUPPLY AND SERVICES GMBH, Bad Bentheim, Germany
HOWARD COUNTY JUNIOR COLLEGE, Big Spring, TX, USA
MEXVEN OIL AND GAS CONSULTING S.A.C. (MEXVEN-SAC), Lima, Distrito de Miraflores, Peru
MID-EAST TRUCK & TRACTOR SERVICE INC, East Canton, Ohio, USA
ONE NATURE LLC, Houston, TX, USA
PHILDAMM INTEGRATED SOLUTIONS LTD, Port Harcourt, Rivers State, Nigeria
PROYECTOS Y CONSTRUCCIONES FRAMARCA SA DE CV, Villahermosa, Tabasco, Mexico
PT TRIKONA PRIMA-WELL CONTROL SCHOOL INDONESIA, Jakarta Selatan, Indonesia
RANGE RESOURCES DRILLING SERVICES LTD, San Fernando, Trinidad and Tobago
ROOT NINE INTERNATIONAL FZE, Saif Zone, Sharjah, UAE
WENNSOFT INC, New Berlin, WI, USA
WORKSAVER EMPLOYEE TESTING SYSTEMS LLC, Houma, LA, USA
XI’AN CHENGYU ENGINEERING TECHNOLOGY CO LTD, Xi’an, China
DRILLBITS Volume 24, Number 7
Jay Minmier, Chairman • Stephen Colville, President and CEO • Amy Rose, Editor
PO Box 4287, Houston, TX 77210-4287 USA
All listed phone extensions are for IADC’s Houston headquarters,
+1/713-292-1945. Fax +1/713-292-1946.
Send comments/questions to Amy Rose at amy.rose@iadc.org.
To subscribe to Drill Bits, go to www.iadc.org/drillbits.
To change/cancel a Drill Bits subscription, send an e-mail message to
IADC Director – Membership Sharon Thorpe at sharon.thorpe@iadc.org.
The post DRILLBITS – July 2014 appeared first on IADC - International Association of Drilling Contractors.