Qatar Petroleum (QP) is a state-owned public corporation established by Emiri Decree No. 10 in 1974. It is responsible for all phases of the oil and gas industry in the State of Qatar.
The principal activities of QP, its subsidiaries and joint ventures are the exploration, production, local and international sale of crude oil, natural gas and gas liquids, refined products, synthetic fuels, petrochemicals, fuel additives, fertilizers, liquefied natural gas (LNG), steel and aluminium.
QP’s strategy of conducting hydrocarbon exploration and development is through Exploration and Production Sharing Agreements (EPSA) and Development and Production Sharing Agreements (DPSA) concluded with major international oil and gas companies.
The operations and activities of QP and its affiliates are conducted at various onshore locations, including Doha, Dukhan and the Mesaieed and Ras Laffan Industrial Cities, as well as offshore areas, including Halul Island, offshore production stations, drilling platforms and the North Field.
Thriving on a spirit of enterprise, each of our joint ventures is underpinned by transparency, innovation and high standards of quality and service. At Qatar Petroleum, we are committed to one thing above all: Excellence
Senior Technicians Electrical
Knowledge, Skills & Experience
Education and Training
-Completion of secondary (12 years) education followed by 2 years formal full time (ITI / Diploma) education to OND level or equivalent.
-Short courses in safety and hazardous area.
-Familiar with safety standards and regulations.
Experience
-Minimum 10 to 12 years experience in the installation, maintenance, repair, overhaul of wide variety of electrical equipment such as transformers, 5witchgears, motors, motor control centers, generators, protection relay calibration, lighting systems, batteries and chargers, inverters and at least 4 years experience in variable speed drive and PLC control system in the oil and gas industry.
Primary Purpose of the Job
Responsible for the electrical maintenance activity scheduled, routine and breakdown throughout the oil and gas stations, inclusive of the inspection, overhauling, repairing, testing, commissioning of HT / LT switchgears, motors and motor control center, generators, transformers, batteries and chargers, inverters,
UPS units, heat treatment units, PLC controlled systems, Variable Speed Drive
Systems (VSDS) and all other plant equipment. Ensures all work is completed In a safe, timely and cost effective manner and according to planned schedules. Carries out administration work for the system. Performs switching up to and including 3.3kV, transferring stations load from station generation to Dukhan power station and vise-versa by synchronizing to 33/11 KV system.
Principal Accountabilities
-Directs the work of and participates with a crew of technicians in carrying out the routine inspection, trouble shooting and fault diagnosis, testing, overhauling, commissioning of electrical a/c & d/c motor starters, a/c & d/c generators, heat treatment equipment, inverters, UPS units, battery chargers, tripping units, transformer/rectifier units, overhead cranes, mobile generators, lighting units, mobile steam generators, variable speed drive systems, 3kV/ 415V incomers and bus couplers switchgears, all kinds of electric tools, mechanical workshop machine equipment, battery maintenance for gas turbines, inverters and standby diesel generating sets.
-Carries out breakdown repair, inspection and maintenance of variable speed drive systems.
-Carries out breakdown repair and maintenance on high voltage motor starters.
-Receives all incoming work requests for repair, installation or modification works in all types of plant equipment, either through his line engineer or SAP notification. Determines priorities in co-ordination with the Lead Maintenance Engineer and if necessary establishes time estimates, requirement of spare parts, tools and support services.
-Participates in the work of subordinate technicians as necessary to ensure priorities are attended to and urgent work promptly completed.
-Undertakes specialist and complex modification and faultfinding.
-Prepare process and maintenance file for variety of documents relating to all electrical work in assigned area.
-Ensures that the electrical personnel carry out the planned maintenance routines prepared by the Lead Maintenance Engineer in conjunction with
Planning Division. From the published work program, checks that maintenance work has been carried out as planned. Ensures that a record of work completed has been compiled and entered in SAP.
-Maintains technical records for all electrical equipment including the maintenance records and equipment, technical data regarding the specification. Issues work permit and ensures that any instructions regarding excavation are followed so as not to disrupt underground cables.
-Direct and organises workshop activities to ensure that spare parts are stored and used in cost effective manner.
-Ensures that significant maintenance data is entered into SAP, upon completion of works.
-Participates in projects and contract work including the installation and modification works.
-Carries out other similar or related duties such as assisting engineer in diagnosing, locating and clearing faults.
-Carries out standby duties as lead man of the electrical discipline covering all production stations.
-Carries out switching up to and including 3.3kV following approved authorization.
-Responsible for the training of National trainees.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 10 Years
Maximum Work Experience: 12 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
Apply now
Technicians (Instrument / Control)
Knowledge, Skills & Experience
Education
-Completion of full time secondary education, followed by a minimum of two years (ITI / Diploma) full time training in instrument maintenance, electronic and microprocessor equipment to Ordinary National Certificate level, except where good background and experience is advantageous especially relating to the oil and gas production industry, including gas compression. Any relevant courses to be taken into consideration.
-Fair knowledge of English, in both written and spoken.
Experience
-Minimum 4 years experience in the maintenance and repair of wide range of instrumentation, electronic, pneumatic, gas turbine and gas compression control and protection systems, logic microprocessor based control equipment.
-Should have a good knowledge of safety practices relating to the Oil & Gas / Petrochemical industry.
Primary Purpose of the Job
Installs, cleans, calibrates, maintains, modifies, overhauls, re-commissions and tests all installed instrumentation and control systems, including pneumatic and electronic process control instrumentations as per the instruction by Senior Tech / Instrument Engineer. Assist in the maintenance and fault finding, repair and calibration of gas turbine controls and protection systems in accordance with prescribed routine and preventive maintenance procedures. Carry out effective maintenance offield instruments including routine inspection, Testing, calibration, repair, maintenance, commissioning and liaise with production personnel fault diagnosis and maintenance of instrument related to gas turbine Control Systems, Vibration & Temperature monitoring & Protection systems, Anti- surge control systems, HMI, PLC / SLC
Principal Accountabilities
-Carry out effective maintenance of field instruments including routine inspection, Testing, calibration, repair and maintenance, commissioning. Carry out breakdown repair, maintenance and calibration of electronic and pneumatic instruments in site or in workshop. This shall include, but not be restricted to work, F&G detectors, electronic transmitter for various process measurements, pneumatic transmitters and controllers, stand alone controllers, Control valves of different types, shutdown and blow down valves of different types including pneumatic actuators, Solenoid valves, SDVIBDV related panel instruments, UP converters, level transmitter, temperature transmitter, local indicators, analytical Instruments.
-Carry out preventive Maintenance Jobs. Helps Senior Tech to Collect & Maintain
Necessary documents related to corrective, Preventive Maintenance. Involves in making the work permit and carry out the required work as per the work order.
-Witness function tests, loop checks and verifies data sheets, reports and documents as instructed by Senior technician/Instrument Engineer.
-For instruments that cannot be repaired on site, assist in arranging to transport to central instrument workshop. This includes testing and calibration as well as isolating, removing, dismantling, inspecting, calibrating, repairing, testing, installing and commissioning of all the instruments mentioned.
-Carry out onsite fault diagnosis of gas turbine control systems, gas compressors control systems including anti surge control system. This will involve checking and trouble shooting of systems, field instruments, vibrations, displacements and temperature instrumentation. Routine maintenance of control systems and field instruments.
-Carry out minor modification works along with general technicians Carry out Pre shutdown, Shutdown activities as per planned schedules and contracts
-Carry out Fault diagnosis DCS Systems PLC ESD and F&G and associated field instrumentation, Carry out effective maintenance by doing routine inspection, calibration, repair and maintenance of Toxic and flammable gas detectors, Testing of flame detectors and heat detectors
-At the start of each shift as instructed by senior technician! Instrument Engineer, perform the corrective / preventive / breakdown maintenance. Follow safe and proper working practices in preparing permit to work for all worksites. Liaise with production operations personnel. Reports general/senior technicians as and when required for updating jobs and plant status.
-Ensure worksites & related equipments are left clean, tidy & sealed before leaving worksite. Ensure that the plant is left in a safe condition where it is necessary to carry over the work to the next shift and maintain good house keeping. Follow proper time keeping and attendance.
-Carry out jobs as per ISO / QMS procedures & maintain Documentation.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 4 Years
Maximum Work Experience: 8 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
Apply now
General Technicians (Instrument / Control)
Knowledge, Skills & Experience
Education
-Completion of full time secondary education, followed by a minimum of two years (ITI / Diploma) full time training in instrument maintenance, electronic and microprocessor equipment to Ordinary National Diploma level, except where good background and experience is advantageous especially relating to the oil and gas production industry, including gas compression. Any relevant courses to be taken into consideration. Fair knowledge of English, in both written and spoken
Experience
-Minimum 7 years experience in the maintenance and repair of wide range of instrumentation, electronic, pneumatic, gas turbine and gas compression control and protection systems, logic microprocessor based control equipment.
-Should have a good knowledge of safety practices relating to the Oil/Petrochemical industry.
Primary Purpose of the Job
Forms part of a team with a crew of technicians in carrying out the routine preventative maintenance of process control systems and equipment including electronic and pneumatic instrumentation. Includes dismantling, inspecting, calibrating, repairing, testing, installing and commissioning a wide range of field instrument equipment. Carries out repair work on turbine control panels and assists in the repair work of small pneumatically controlled instruments and valves. Ensures all work is carried out in a safe, timely and cost effective manner and according to planned schedules and procedures.
Principal Accountabilities
-Participates with a crew of technicians in carrying out the routine preventative maintenance of process control instrumentation. Including repair, maintenance and calibration of electronic and pneumatic instruments in site or in area workshop.
-Troubleshoot logic circuit of turbine control system, DeS, PLC, ESD system and maintain Fire & gas systems and associated flame detectors, flammable gas detectors, toxic gas detectors, heat detectors, Testing, isolating, removing, dismantling, inspecting, repairing, calibrating, installing and commissioning of the full range of electronic and pneumatic instrumentation used in the hydrocarbon industry.
-Repair and calibrate electronic transmitters (SMART and conventional), pneumatic transmitters and controllers, solenoid valves, pneumatic actuated valves, liP converters, level, pressure, flow, temperature transmitters, local indicators (pressure and temperature etc.) in the field and workshop.
-Repair and maintenance of various types of control valves, shutdown valves, blow down valves on site.
-Witness function tests, loop checks and verifies data sheets, reports and documents as instructed by Senior technician/Instrument Engineer
-Carries out repair work on turbine control panels ESD and Fire and gas panel PLC and DCS panel in emergency requests and / or engineering Work Orders requiring Hot/Cold
Work Permits. Replace defective relays, solenoid valves, solid-state or relay logic instrumentation as identified during inspection.
-Participates with Technician-l in the repair of pneumatically controlled instruments and valves as required, ability to read instructions from technical manuals and manufacturers recommendations.
-Carry out instrument control equipment inspections at field locations. Receives emergency requests to attend to the defective instruments. Liaises with production Supervisors to arrange plant access and issuing of appropriate permits and either repairs on-site, replaces unit or removes and returns to central instrument workshop for repair and testing.
-Documentation - Calibration sheets, Test equipment inventory, hand tools inventory, pressure test records, inspection reports, daily activity reports. All these shall be completed as and when required.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 7 Years
Maximum Work Experience: 10 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
Apply now
Senior Technicians (Instrument / Control)
Knowledge, Skills & Experience
-Completion of Higher / Secondary (12 years) education followed by 3 years full time technical training Diploma in process plant operations, to City and Guilds Institute Final Certificate level, plus relevant short courses in safety plant operations.
-High degree of competency in spoken and written English.
-Minimum 8 years experience in operating process plant in the oil or petrochemical industry including experience as a Senior Operator.
Primary Purpose of the Job
-Monitoring production facilities and provides work direction to General Operators, Field Operators - I, Field Operators - II and Field Operators - III. Participates in operating all production facilities to desired output levels. Assumes responsibility for assigned area in the event of an emergency and in the absence of supervisor. He is directed by the Area Supervisor. Will work on standby duty on a rotational basis. The Senior Operator is expected to work as directed in any of the plant area covered by the Production Department.
These areas are:
1. Khatiyah, FahahH and Jaleha Oil & Degassing Stations.
2. Fahahil Stripping PLant.
3. Secondary Recovery - Powered Water Injection, Wellhead Maintenance.
4. Gas Lift Compressor Station.
The Senior Operator is required to work on shifts depending on the area to which he is assigned.
Principal Accountabilities
-Sanctions Hot and Cold Work Permits including those for gas tests, and oversees engineering work on site. Includes receiving permit from supervisor, checking that required precautions have been taken, signing permit authorization, and carries out gas tests as necessary. Registers details of permits and oversees contractor or other person performing the work. Monitors work in progress, checks that personal protective equipment (PPE) is worn as required, and initials work orders upon satisfactory completion.
-Checks gas gathering units, scrubbers, knock out pots, flow, levels, pressures, temperatures and differential pressure (DP). Checks the computer relay for anti –surge system. Includes checking turbine panels, making required adjustments, checking compressors i.e. seal oil, lube oil, cooling water system and knock out drums, checking abnormal noise or vibration in fin fan unit and surrounding areas, draining DP cells and checking generally for leaks.
-Check the DCS panel, speed tronic panel, UPS systems, auxiliary equipment panel and MCC (Motor Control Centre) Panel boards to determine all equipments and systems are operating as per the operating parameters. Make sure all routine check lists, process and equipment parameter reading sheets are completed and necessary actions are taken. Guide and assist the panel operator on Des panel in emergency, shutdown/start-up situation. At situation of emergency shutdowns, gas clouds (leaks), fire etc. takes a lead role to guide and help the General Operator & Field Operator and take necessary actions. Monitor and maintain a continuous check on various plant parameters for quality of products.
-Monitor and maintain the performance of various equipments like heat-exchangers, natural gas dryers, turbine pumps, demethanizer column, compressors and nitrogen generation units. Adjust control parameters like pressure, temperature, levels and flow meters for steady operation of the plant within specified range from DCS panel; monitor and maintain different wells flow rates, pressure and temperature, any deviation from normal value should bring to the notice of the supervisor. Monitor and maintain a continuous check on various plant parameters for quality of products.
-Tests the cascade and trip system. Includes carrying out checks as necessary to check that fail safe system are working properly, touring separators, turbines, pump stations with operators and Engineering personnel.
-Checks PWI Stations, PWI Clusters, all station source wells and injector wells for flow, pressures, temperatures levels etc. includes checks on the individual pump panels, making required flow adjustments to lube oil, instrument air, chemical injection.
-Starts-up, shuts down, depressurizes, isolates, purges gas from and re-commissions all plant and equipment as directed by supervisor. Includes starting up or shutting down compressors, pumps, turbo-expander regeneration compressor, pump stations, clusters, TVB or dehydration unit under instruction or when facilities trip. Isolates items of equipment by operating valves and depressurizing to zero so that maintenance works can be carried out. Includes gas freeing separators, receiving shutdown list from supervisor, instructing contractor to install spades. Re-commissions plant and equipment by starting up separators, dehydration unit, compressors, TVB's, pumps, PWI Stations and Clusters.
-Carries out various production tests when required. Includes checking that chokes are properly set, adjusting levels, flow rates and injection rates and pressures, replacing orifice plates, taking samples of oil from separators, flow tines or wellheads, reading and interpreting readings and completing test sheets accordingly.
-Monitors and controls the operation and maintenance of the Glycol, Silica Gel and
Molecular Sieve of Dehydration units. Includes coordinating with Supervisor, General
Operator and Field Operators when a malfunction occurs in any facility, deciding action to be taken, catting in maintenance staff as necessary and following through to completion.
-Operates and reports defects in oil I gas wells using the Baker panel, surface control subsurface safety valve, surface safety valve and trip system. Includes operating Baker panel to open or close valves down hole or at the surface, checking the sequence control of the hydraulically operated valves and checking that DA pilots are set for the desired operating conditions.
-Monitors PWI pumping stations and PWI Clustors. Adjust station flow rates as directed by supervisor. Records welt injection data on a routine basis for all the injection wells.
-Carries out chemical dosing of all the source wells injecting biocide. Monitors chemical inhibitor injection into all source wells and injection wells. Ensures adequate supplies of chemical inhibitor and biocide are available at stations and source wells. Checks and changes nitrogen cylinders at source wells and adjusts purge rates as necessary. Checks static and dynamic water levels at all source wells on a weekly basis.
-Ensures that relief valves are chained in the correct operating mode. Includes checking that relief isolation valves are chained and locked in the correct position. Checks are carried out weekly or more frequently if necessary and registered.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 8 Years
Maximum Work Experience: 13 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
Apply now
Mechanical Engineers
Knowledge, Skills & Experience
-B.E. / B.Tech / B.Sc (Engineering) in Mechanical
-Must have satisfied the academic requirements for Chartered Engineers status or equivalent.
-Good knowledge of written and spoken English.
-Minimum 10 years experience in the maintenance of various equipment in the oil and gas or petrochemical industry and including a minimum of 3 years supervisory experience in similar capacity.
-Leadership & motivational skills, good knowledge of Engineering and project
Management skills.
Primary Purpose of the Job
-Directs, inspects and coordinates maintenance work on Oit & Gas stations, Powered Water Injection, Gas Lift and Wellhead Maintenance, is directly responsible for the prompt maintenance of vertical and horizontal pumps, compressors, surface pumps and motors, gas turbines, injection compressors, vessels, generators and associated piping and equipment in all field areas in support of production operations to ensure their safe and efficient operational availability and reliability at all times.
-Review/ update predictive &. preventive maintenance program.
-Operate and authorized permit to work system.
-Ensures that materials used meet standards and specifications.
-Maintain industrial housekeeping at high level throughout.
-Manage the work of assigned personnel including allocation of job responsibilities, coaching, appraising performance and developing staff.
-Schedule workloads and set priorities including inspection of contractor work.
-Provide technical assistance.
-Maintain equipment documentation/movable lists, drawings and records, according to ISO standards.
-Ensure SAP records are updated, and provide all the technical input to the database for the new equipment.
-Troubleshooting on plant equipment
Principal Accountabilities
-Advises Lead Maintenance Engineer of the status of all plants and piping in his area of responsibility on a daily basis. Reports problems and action taken and progress status of any project work in the area concerned.
-Arrange for the prompt repair of plant equipment with the assistance of the appropriate support engineer and lor engages the temporary use of transferred personnel or contracted work/staff (this may include initiating & processing contract work orders based on the Scope of Work requirement).
-Participates with Technicians as necessary in more critical work and ensures that it is completed to the required standards.
-Assign work to subordinates with details of scheduling, permits required and any particular technical or special requirement.
-Liaise closely with area Field Production Supervisor in sorting out any problems revealed in the Daily Production log and agrees on the necessary action to improve operational reliability and efficiency.
-Ensures that the planned maintenance routines prepared by the Planning section are carried out. Reviews planning programs and advises / feedback information useful for future consideration to the planning section.
-Comments on plans produced by Assistant Manager (Business Planning) in conjunction with Lead Maintenance Engineer in connection with inspections, modifications, or major repair work during shutdowns, includes commenting on priorities, changes in schedules, the feasibility of proposed sequences etc.
-Recommends/implements plant modifications as requested by Operations Division.
-Assesses with the Lead Maintenance Engineer the need to hire the contractors for major shutdowns, including the preparation of tender documents and Scope of Work. Ensures that major shutdowns are properly coordinated with Production and where contractors are employed they are properly supervised by his staff, co-ordinates commissioning and testing of re-commissioned or modified plant.
-Coordinates the execution of work requests raised from within or outside Production Department as requested by the Lead Maintenance Engineer. Generates SAP work orders to those concerned. Follows up and updates Lead Maintenance Engineer on the progress.
-Ensures that all records, completed work orders, maintenance and shutdown reports are properly filled in and submitted to Lead Maintenance Engineer or entered in the SAP under relevant equipment history where applicable.
-Review facilities in fields annually, in terms of workshop equipment, tooLs, spares and other materials and makes recommendations on additions and replacements as warranted, in accordance with annual routine operating/ cap' non routine budgets.
-Issues hot and cold work permits and applies for excavation permits as required to Maintenance personnel and contracts, includes initiating or compiling, approving and passing to Operations personnel for countersigning. On completion of work, signs off jointly with Operations personnel.
-Approves contractors time and work sheets, includes checking whether the work has been carried out on a daily or lump sum basis according to the terms of the agreement and reports of hours spent and equipment used are true and correct.
-Carries out other similar or related duties such as carrying out standby duties (on call) as Production Duty Officer on a rotational basis.
-Expected to carry out leave relief duties with other Lead Maintenance
Engineer.
-Raises Reservations and PR for materials requirements. Contacts Materials
Supervisors in Doha to follow-up on materials ordered.
-Holds safety and house keeping meetings. Implements recommendations.
-Highlights areas of maintenance work requiring future planning and additional funding to Lead Maintenance Engineer for action.
-Reviews the spare parts requirements including the overall spares for major equipment overhauls. Raises the necessary material requisitions and stock proposal forms as necessary.
-Completes regular appraisal reports on assigned trainees in his area. Ensures close adherence to their Individual Development Program (IDP).
-Stand-in for Lead Maintenance Engineer as and when required during leave periods.
-Proposes yearly budget required for routine and non-routine maintenance.
-Ensure safety procedures are followed by QP and Contractor staff.
-Ensure safety, health and environment awareness are followed up.
-Follow up QMS standard and recommend for update as required.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Project Management/Site Engineers
Area of Specialization: Mech. Engnr-Plumbing/Fire Protection
Maintenance Engnr
Minimum Work Experience: 10 Years
Maximum Work Experience: 15 Years
Age: Not Specified To: Not Specified
Qualification: B.Tech/B.E.
Apply now
Senior Operators
Knowledge, Skills & Experience
-Completion of Higher / Secondary (12 years) education followed by 3 years full time technical training Diploma in process plant operations, to City and Guilds Institute Final Certificate level, plus relevant short courses in safety plant operations.
-High degree of competency in spoken and written English.
-Minimum 8 years experience in operating process plant in the oil or petrochemical industry including experience as a Senior Operator.
Primary Purpose of the Job
-Monitoring production facilities and provides work direction to General Operators, Field Operators - I, Field Operators - II and Field Operators - III. Participates in operating all production facilities to desired output levels. Assumes responsibility for assigned area in the event of an emergency and in the absence of supervisor. He is directed by the Area Supervisor. Will work on standby duty on a rotational basis. The Senior Operator is expected to work as directed in any of the plant area covered by the Production Department.
These areas are:
1. Khatiyah, FahahH and Jaleha Oil & Degassing Stations.
2. Fahahil Stripping PLant.
3. Secondary Recovery - Powered Water Injection, Wellhead Maintenance.
4. Gas Lift Compressor Station.
The Senior Operator is required to work on shifts depending on the area to which he is assigned.
Principal Accountabilities
-Sanctions Hot and Cold Work Permits including those for gas tests, and oversees engineering work on site. Includes receiving permit from supervisor, checking that required precautions have been taken, signing permit authorization, and carries out gas tests as necessary. Registers details of permits and oversees contractor or other person performing the work. Monitors work in progress, checks that personal protective equipment (PPE) is worn as required, and initials work orders upon satisfactory completion.
-Checks gas gathering units, scrubbers, knock out pots, flow, levels, pressures, temperatures and differential pressure (DP). Checks the computer relay for anti –surge system. Includes checking turbine panels, making required adjustments, checking compressors i.e. seal oil, lube oil, cooling water system and knock out drums, checking abnormal noise or vibration in fin fan unit and surrounding areas, draining DP cells and checking generally for leaks.
-Check the DCS panel, speed tronic panel, UPS systems, auxiliary equipment panel and MCC (Motor Control Centre) Panel boards to determine all equipments and systems are operating as per the operating parameters. Make sure all routine check lists, process and equipment parameter reading sheets are completed and necessary actions are taken. Guide and assist the panel operator on Des panel in emergency, shutdown/start-up situation. At situation of emergency shutdowns, gas clouds (leaks), fire etc. takes a lead role to guide and help the General Operator & Field Operator and take necessary actions. Monitor and maintain a continuous check on various plant parameters for quality of products.
-Monitor and maintain the performance of various equipments like heat-exchangers, natural gas dryers, turbine pumps, demethanizer column, compressors and nitrogen generation units. Adjust control parameters like pressure, temperature, levels and flow meters for steady operation of the plant within specified range from DCS panel; monitor and maintain different wells flow rates, pressure and temperature, any deviation from normal value should bring to the notice of the supervisor. Monitor and maintain a continuous check on various plant parameters for quality of products.
-Tests the cascade and trip system. Includes carrying out checks as necessary to check that fail safe system are working properly, touring separators, turbines, pump stations with operators and Engineering personnel.
-Checks PWI Stations, PWI Clusters, all station source wells and injector wells for flow, pressures, temperatures levels etc. includes checks on the individual pump panels, making required flow adjustments to lube oil, instrument air, chemical injection.
-Starts-up, shuts down, depressurizes, isolates, purges gas from and re-commissions all plant and equipment as directed by supervisor. Includes starting up or shutting down compressors, pumps, turbo-expander regeneration compressor, pump stations, clusters, TVB or dehydration unit under instruction or when facilities trip. Isolates items of equipment by operating valves and depressurizing to zero so that maintenance works can be carried out. Includes gas freeing separators, receiving shutdown list from supervisor, instructing contractor to install spades. Re-commissions plant and equipment by starting up separators, dehydration unit, compressors, TVB's, pumps, PWI Stations and Clusters.
-Carries out various production tests when required. Includes checking that chokes are properly set, adjusting levels, flow rates and injection rates and pressures, replacing orifice plates, taking samples of oil from separators, flow tines or wellheads, reading and interpreting readings and completing test sheets accordingly.
-Monitors and controls the operation and maintenance of the Glycol, Silica Gel and
Molecular Sieve of Dehydration units. Includes coordinating with Supervisor, General
Operator and Field Operators when a malfunction occurs in any facility, deciding action to be taken, catting in maintenance staff as necessary and following through to completion.
-Operates and reports defects in oil I gas wells using the Baker panel, surface control subsurface safety valve, surface safety valve and trip system. Includes operating Baker panel to open or close valves down hole or at the surface, checking the sequence control of the hydraulically operated valves and checking that DA pilots are set for the desired operating conditions.
-Monitors PWI pumping stations and PWI Clustors. Adjust station flow rates as directed by supervisor. Records welt injection data on a routine basis for all the injection wells.
-Carries out chemical dosing of all the source wells injecting biocide. Monitors chemical inhibitor injection into all source wells and injection wells. Ensures adequate supplies of chemical inhibitor and biocide are available at stations and source wells. Checks and changes nitrogen cylinders at source wells and adjusts purge rates as necessary. Checks static and dynamic water levels at all source wells on a weekly basis.
-Ensures that relief valves are chained in the correct operating mode. Includes checking that relief isolation valves are chained and locked in the correct position. Checks are carried out weekly or more frequently if necessary and registered.
-Operates or ensures that fire fighting equipment is operated, tested and maintained. Trains plant operating personnel in the use of such equipment. Makes a weekly inspection of all fire/safety equipment and submits a report.
-Carries out other similar or related duties such as preparing time sheets; ensuring good housekeeping; and checking oil, water, tyres, battery etc. on assigned vehicle.
-Responds, as shown in the Emergency Action Plan as the forward or local control point.
-Responds to Emergency Action Plan as part of the Standby Duty Crew.
-Must be aware of the financial consequences of erroneous operation, in terms of loss of revenue or damage to equipment.
-Ensures that subordinates conduct their duties in a safe and efficient manner.
-Help and assist the 'Qatari Trainees' for their development in "On-the Job" training program.
-To act as Field Production Supervisor whenever required.
-Give instruction to the daily labourer for maintaining cleanliness of the plant.
-To follow/ implement Quality Management System & Procedures and make suggestions for continuous improvement.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Service/Maintenance Supervisor
Minimum Work Experience: 8 Years
Maximum Work Experience: 13 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
Apply now