Integrated Gasficiation Combined Cycle Engineering Specialist
The successful candidate will act as the company Technical Authority for gasification, synthesis gas (syngas) and impurities removal; and work with a large group of refining specialists to provide support to Saudi Aramco’s refining facilities and technology programs.
Minimum Requirements
• A bachelor’s degree in chemical engineering or other related engineering degree from an accredited university. A Professional Engineer (P.E) or Chartered Engineer (C.Eng.) license or registration would be desirable but is not essential.
• A minimum of 10 years of professional experience with extensive design and operating experience in IGCC facilities, and in the latest technologies for the production of syngas.
• Must have extensive experience in refinery processes.
• Must be able to demonstrate excellent written and oral communication skills.
Apply Now
Refining & Distillation Engineer
Minimum Requirements
The successful candidate must have the following experience, competencies and skillsets:
A B.S. degree in chemical engineering, or other advanced professional engineering degree is highly desirable.
A Professional Engineer (P.E.) license or registration would be highly desirable.
Minimum of ten years of experience in design and operation of the distillation and fractionation process (crude & vacuum distillation and other refinery fractionation units).
Have sufficient experience to support and troubleshoot refinery distillation and fractionation units, review and scope new capital projects. And participate in project commissioning.
Expertise in column internal retrofits and familiarity with industry practices, standards and procedures.
Be conversant with the use of process simulation software such as HYSYS/PRO II.
Good command of English written and oral communications.
Experience in coaching and mentoring young and inexperienced engineers.
Apply Now
Pipeline, Hydraulics & Simulation Engineering Specialist
Minimum Requirements
A bachelor’s degree or master’s degree in Chemical Engineering or Mechanical Engineering from an accredited university
A minimum of 15 years of professional experience, including 10 years performing pipeline hydraulic simulations.
Must be able to demonstrate expertise in single and multiphase pipelines hydraulic simulation.
Extensive expertise in steady-state and transient hydraulic analyses using industry standard software like OLGA, SPS, PIPEPHASE and PIPESIM.
Must be an expert in performing surge analysis on liquid lines using simulation tools like SPS.
Experience in working with online pipeline monitoring systems.
Experience of simulating gas networks.
Knowledge of flow assurance issues like hydrates, wax, etc.
Must be able to demonstrate excellent written and oral communication skills.
Must be familiar with applicable regulations, codes and standards.
Knowledge of CFD simulation experience is an advantage.
Apply Now
Engineering Specialist
Minimum Requirements
The successful candidate must have the following experience, competencies, and skillsets:
1. A bachelor’s degree in an engineering-related discipline is required; a master’s degree is preferred.
2. A minimum 10 years of progressively responsible experience in standards development, including experience in the planning, development, and dissemination of professional standards and experience with technical committees and technical advisory groups.
3. Strong interpersonal skills for responding to the needs of members, volunteers, and colleagues.
4. Demonstrated success in cultivating and sustaining relationships with senior management from diverse organizations.
5. A consistent record of successful initiatives to broaden industry presence and penetration, and/or influence industry standards.
6. Strong managerial skills, including the ability to work with individuals in prominent and influential positions cross diverse organizations.
7. Excellent meeting facilitation and public speaking capabilities.
8. Strong verbal and written communication skills, including public speaking to small and large groups.
9. Knowledge, experience, and the ability to travel domestically and internationally, including on weekends and holidays.
10. Ability to use MS Office products and the Internet proficiently, with the ability to work remotely using laptops in dynamic environments while traveling.
Minimum Requirements
• 7 years of formal experience in designing instructional courses and programs using Bloom’s Taxonomy.
• Skilled in designing applications based technical training.
• A B.S./B.A. in instructional design, training and development, human resources development, organizational or management development, or equivalent. A master’s degree is preferred.
• Workplace learning and performance certification (preferred). Certified Professional in Learning Performance (CPLP), Certified Performance Technologist (CPT), etc.
• Proficiency in consulting.
• Excellent writing and verbal communications skills.
Apply Now
Rotating Equipment Engineer
Minimum Requirements
1.EDUCATION: B.S. in Engineering.
2.EXPERIENCE: At least 9 years experience, preferably in in Plant Rotating Equipment and Hydraulic Study and Simulations Piping, Valves & fittings, in Oil/Refined products process operation (preferably in Truck loading/offloading facilities (Depots) Distribution and/or Terminal Operation) such that the incumbent is clearly recognized as an expert in his field. Experience must be such that the incumbent is clearly recognized as being capable of project and design assignments and qualified to an outstanding degree in one or another "Specialist" category.
3.LANGUAGE REQUIREMENTS: No second language is required.
4.OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco's Codes, Standards and Specifications.
Apply Now
Inspector Engineer (Mechanical)
Minimum Requirements
•As the successful candidate, you will hold a Bachelor's degree in Mechanical Engineering with a minimum of 8 years of professional experience, preferably in the oil or similar process industry
•Certified for API 570 and API 653 with good experience in welding inspection and engineering experience in reviewing design packages.
•Thorough understanding of Middle East Inspection codes and standards
Apply Now
Inspector Engineer (Mechanical)
Minimum Requirements
•As the successful candidate, you will hold a Bachelor's degree in Mechanical Engineering with a minimum of 8 years of professional experience, preferably in the oil or similar process industry
•Certified for API 570 and API 653 with good experience in welding inspection and engineering experience in reviewing design packages.
•Thorough understanding of Middle East Inspection codes and standards
Apply Now
Instrument/Process Control Engineer (Engineer I) – Unconventional
Minimum Requirements • A bachelor’s degree in Process Control/Instrumentation Engineering or a higher qualification from an accredited university, MS is preferred.
• A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential
• At least 10 years of experience in the industrial operation facility, Shale gas facility is preferred.
• Must has experience in the instrumentation/control system design upgrades and improvements, troubleshooting field instrumentation, investigating instrumentation/control system incidents including preparation of technical reports, identifying the root cause and provide necessary recommendations.
• Must be knowledgeable with national and international safety standards; specifically from IEC, API, ASTM and NACE.
• Has a hand on experience in most of Distributed Control System (DCS), Emergency Shutdown System (ESD) and other PLCs Controllers.
• Experience with creating/reviewing the P&IDs and ILDs and other control drawings
• Experience with troubleshooting Complex control systems failure, including DCS, ESD, CC and PLC system
• Study in depth the instrumentation and control philosophy for the plant and provide engineering technical support to maintain DCS, ESD, CCC and PLC systems such as Honeywell & Yokogawa DCS systems and ESD systems.
• Experience with Instrumentation systems field Installation, Commissioning and Energizing.
• Experience in specifying and layout of instrumentation cables via cable trays, duct banks or direct buried.
• Capable of communicating with multidiscipline engineers to complete projects
• Proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organization
• Strong written and oral communication skills. Able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.
• Hands-on person who will immediately command the professional respect of others who possess long-time practical experience of working in or serving the industry. Person whom others, at all levels, will seek out for advice and counsel.
• Able to work effectively with the minimum of supervision on relatively unstructured tasks
Apply Now
Hydroprocessing Engineer
Minimum Requirements T
he successful candidate must have the following experience, competencies & skillsets:
BS in Chemical Engineering (Advanced degree preferred).
Must have 10 years of industry experience in the design and operation of hydroprocessing facilities, and in the latest technologies from the production of clean fuels.
Demonstrate excellent computer skills as well as excellent oral/written presentation skills.
Must possess excellent command of spoken and written English
Apply Now
Motor & Generator Engineer
Minimum Requirements
The successful candidate must have the following experience, competencies & skillsets:
Bachelor’s degree in electrical engineering degree from an accredited university. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration would be desirable but is not essential.
Ten years’ field experience in the oil and gas industry specializing in the motor and generators.
Must be familiar with international standards related to motors and generators: API, IEC, NEMA MG-1, NEC and IEEE.
Capable of troubleshoot, investigate and provide complex technical consultations.
Must be familiar with the following:
• Electrical network interactions with Motor Generators.
• Motor and Generator repair
• Classified area Motors requirements.
Willing to mentor local engineers and provide training programs.
Must be able to give strong technical presentations with high quality technical report and paper writing skills in English.
Should have at least 3 written technical publications and/or papers.
Possess excellent command of spoken and written English.
Apply Now
Compressor and Steam Turbine Engineer
Minimum Requirements
The successful candidate must have the following experience, competencies & skillsets:
Bachelor’s degree in Mechanical Engineering or higher qualification from an accredited university. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration would be desirable but is not essential.
Fifteen years of direct Rotating Equipment experience in refineries, chemical plants, power and utilities plants, gas plants or similar working facilities working in an engineering function to resolve plant machinery and operational problems.
Ten years’ experience in analyzing performance of, troubleshooting, selecting, and maintenance of process gas compressors, steam turbines, gearboxes is required.
Experience shall include mechanical seals troubleshooting, and basic vibration analysis experience.
Detailed knowledge of international codes and API standards is required to support the review of company standards, project reviews, and implementation of plant modifications to compressors and steam turbines.
Experience in solving large process gas compressors mechanical failures are required.
Experience in a Reliability Unit handling rotating equipment for an industrial plant is desirable.
Demonstrate excellent technical report writing and presentation skills.
Possess excellent command of spoken and written English.
Apply Now
HIPS Dynamic Simulation Engineer
Minimum Requirements
A minimum of 10 years field experience in the oil and gas or petrochemical industry, including leadership of dynamic simulation studies associated with the application of safety instrumented systems (ESD and HIPS). This will include a senior engineering role in the areas of upstream high pressure wellhead applications where HIPS were used to protect downstream equipment from overpressure.
Expert knowledge of dynamic simulation/pipeline flow assurance software, including OLGA in support of HIPS applications.
Knowledge of design alternatives to accommodate the response limitations of HIPS, including fortified zones in downstream flowlines, increased flowline diameters, reduced rates, etc. (participation in a deepwater riser study will be a plus).
Must be knowledgeable with national and international safety standards; specifically the IEC, API, ASTM and NACE standards.
Must have excellent written and verbal English skills with proven experience of writing dynamic simulation reports and publications, and be able to present technical results to a diverse audience of managers and engineers.
Previous experience of working with multidisciplinary and multicultural groups.
Apply Now
Gas & NGL Facilities Planning Engineer
Minimum Requirements
A bachelor’s or master’s degree in Chemical Engineering or other related degree from an accredited university. A Professional Engineer (P.E) or Chartered Engineer (C.Eng.) license or registration would be desirable but is not essential.
A minimum of 15 years of professional experience, including at least 10 years as a specialist within gas processing/NGL operations and/or capital program planning.
Experienced in performing economic evaluations, feasibility studies and preparing requests for budgetary approvals within the oil and gas industry.
Experience with a professional consultant in planning and executing engineering studies.
Experience in process/system simulation of gas processing and NGL operations.
Must be able to demonstrate the ability to prepare budgetary reports and deliver technical presentations to corporate management.
Apply Now
chemical engineering
Minimum Requirements
• B.S. degree in Chemical Engineering (advanced degree preferred).
• A minimum of 12 years of experience in the oil and gas industry, with experience in technical support, process design, mass and energy balance calculations, studies, PFD development, and economic evaluations in project planning/development, design and construction areas.
• Experience in conducting economic evaluations of projects.
• Experience in developing projects throughout the project life cycle.
•Experience must be such that you are clearly capable of project and design assignments beyond the ability of the basic professional engineer.
• Thorough knowledge of engineering practices and economic principles, calculation methods, design details, international & Aramco codes, standards and specifications.
• Excellent written and spoken English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements
Apply Now
Senior Process Engineer
Minimum Requirements
The successful candidate must have the following experience, competencies and skillsets:
o A Bachelor of Science degree in Chemical Engineering from internationally recognized academic institution.
o Minimum of ten years of operational experience exclusively in NGL Processing Facility.
o Sufficient experience in investigating process upsets and incidents.
o Familiarity with the use of process simulation software such as HYSYS and PRO II.
o Good command of English written and oral communications.
o Experience in coaching and mentoring young engineers.
o Spirit for team work and leadership skills.
Apply Now
Chemical Engineer
Minimum Requirements
As the successful candidate, you will hold a minimum of a bachelor's degree in chemical engineering or a related science from a recognized and approved program.
In addition, you must have a thorough knowledge of engineering practices and economic principles, calculation methods, and design details.
You will have 9 years of industrial experience, preferably in the oil industry or similar process industry.
Apply Now
Fire Protection Engineer
Minimum Requirements
1. EDUCATION: B.S. in engineering.
2. EXPERIENCE: Five years of professional experience, preferably in the oil or similar process industry.
3. LANGUAGE REQUIREMENTS: A thorough knowledge of English is required to perform work as described; make clear and concise verbal and written reports; and keep up with technical advancements. Arabic is not required, but is desirable for American incumbents in this position.
4. OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco codes, standards and specifications
Apply Now
Mechanical Engineer
Minimum Requirements The successful candidate must hold (as a minimum) a Bachelor of Science degree in mechanical engineering from an accredited institution.
The academic credential must be coupled with a minimum of ten (10) years of work experience in the maintenance and reliability field at oil and gas facilities, and related engineering practices and international standards. Five (5) years of working knowledge of probability/statistics principles, computerized maintenance management systems and notable reliability engineering tools are required.
The candidate must be fluent in spoken and written English, and have the ability to develop and present ideas concisely and clearly. The candidate must also show skills in process management and improvement, project planning, mentorship and leadership.
Apply Now
Fire Protection Engineer
Minimum Requirements
1. EDUCATION: A B.S. in engineering.
2. EXPERIENCE: Nine years of professional experience, preferably in the oil or similar process industry.
3. LANGUAGE REQUIREMENTS: A thorough knowledge of English is required to perform work as described; make clear and concise verbal and written reports; and keep up with technical advancements. Arabic is not required, but is desirable for American candidates.
4. OTHER: Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, U.S. and Aramco codes, standards, and specifications.
Apply Now