Ubee DDW3600 Login Information: Default Gateway - 192.168.100.1 / 192.168.0.1 Username – user / admin / root Password – user / cableroot / root How to Find SSID (Network Name) Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top of the page. Select Primary Network from the menu on the left. Your network name will be listed as Network Name (SSID). How To Find Wireless Passphrase (WPA/WEP) Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Select Primary Network from the menu on the left. Depending on your security type it may be necessary to check the Show Key box. The Wireless passphrase will be listed in the WPA Pre-Shared key space. Changing Wireless Security Type/ Disabling Wireless Security Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Select Primary Network from the menu on the left. One of several security types will be set to enabled. To disable all security select disabled for all the different security types. Click the Apply button at the bottom of the screen. MAC Filtering Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Click Access Control from the menu on the left. Set the MAC Restrict Mode to Disabled. Click the Apply button at the bottom of the page. Change Wireless Channel Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Select Primary Network from the menu on the left. From the drop down menu labeled Control Channel select the desired channel. (Channels 1,3,9,11) Click Apply. Change Wireless Mode Plug the computer into a LAN port via an ethernet cable. Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Select Primary Network from the menu on the left. From the 802.11 n-mode dropdown select Off. Click Apply. Change Wireless Band (Width) The possibility of using 20MHz or 40MHz on this device is based on the current mode selected. If the devices' mode is set to "Up to 300Mbps" the channel width will likely switch between 20MHz and 40MHz depending on surrounding interference. To set the wireless band to 20MHz only, follow these steps. Plug the computer into a LAN port via an ethernet cable. Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Wireless from the menu across the top. Select Primary Network from the menu on the left. From the Bandwidth dropdown select 20Mhz Click Apply. DHCP Reservation Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Click Static Lease from the menu on the left. Enter the MAC Address and the desired IP Address of your Xbox console. Check the Enabled box. Click the Apply button at the bottom of the screen. UPnP Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Select Options from under the Advanced Gateway Setup section. Toggle UPnP on or off by placing or removing the check box next to UPnP Enable. Click the Apply button at the bottom of the screen. DMZ Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Select DMZ Host from the menu on the left. Enter the last digit of the IP Address your Xbox console has. Click the Apply button at the bottom of the screen. Disable DMZ Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Select DMZ Host from the menu on the left. Clear the last digit of the IP Address from the DMZ Address. Click the Apply button at the bottom of the page. Port Forwarding Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Select Forwarding from the menu on the left. Enter the IP Address of your Xbox console in the Local IP column. Set both Ext Start Port and Ext End Port to 3074. Set Protocol to Both. Check the Enabled box. Click the Apply button. Disable Port Forwarding Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Gateway from the menu across the top. Select Forwarding from the menu on the left. Uncheck the Enabled box. Click the Apply button. Firewall Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Firewall from the menu across the top. Un-check both IP Flood Detection and Firewall Protection. Click the Apply button found at the bottom of the screen. How to Find Firmware Version Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Modem from the menu across the top. Select Information from the menu on the left. The firmware version is listed next to Software Version. Firmware Update Auto Update Not Available Manual Update Not Available Restore Factory Defaults Through firmware Plug the computer into a LAN port via an ethernet cable. Login to the router by entering 192.168.100.1 / 192.168.0.1 in to the address bar. Click Login in the upper right corner, enter the login information provided on this page. Select Tools from the menu across the top. Select User Defaults from the menu on the left. Set both Restore Defaults and Reset The System to Yes. Click the Apply button at the bottom of the screen. Through Hardware Plug the computer into a LAN port via an ethernet cable. Locate the reset button on the device. With paperclip/pen/toothpick hold down the reset button down for 30 seconds. Wait for lights to turn off then return to normal. Known Issues This device has been known to cause NAT and random disconnections when IP Flood Detection and the Firewall are on. Multiple Console Support Confirmed No *Because it could not consistently work without NAT issues* Device Manual Support Page.