I was found this template from the other forum section but doesn't know if its correct to post here.
Here is my settings. I hope can pump up until 3.8Ghz but seems my RAM is not the same frequency. I hope there is a solution and i cant up after 3.16Ghz.
Quote:
Motherboard: Model: Gigabyte EP43-DS3L Bios Version: F8
Cpu: Intel Core 2 Duo E7200
Ram: Kingston 2GB PC-5300 667Mhz / Samsung 2GB PC-6400 800Mhz
Power Supply Unit: Cooler Master Extreme 2 625W
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster -------------- : [Auto]
CPU Clock Ratio ---------------------- : [9]
Fine CPU Clock Ratio ----------------- : [0.5]
CPU Frequency ---------------------: 3.16Ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control --------------- : [Enabled]
CPU Host Frequency (Mhz) --------------: [333]
PCI Express Frequency (Mhz) ---------- : [100]
C.I.A.2 ------------------------------ : [Disabled]
Advanced Clock Control ------- [Press Enter]
CPU Clock Drive ---------------------- : [800mV]
PCI Express Clock Drive -------------- : [800mV]
CPU Clock Skew (ps) ------------------ : [0ps]
MCH Clock Skew (ps) ------------------ : [0ps]
DRAM Performance Control
Performance Enhance ------------------- : [STANDARD]
Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
(G)MCH Frequency Latch ---------------- : [333Mhz]
System Memory Multiplier -------------- : [2.66B]
Memory Frequency (Mhz) ---------------- : [667]
DRAM Timing Selectable ---------------- : [Auto]
Standard Timing Control
CAS Latency Time -------- ?? ---------- : [Auto]
tRCD ------------------- ?? ---------- : [Auto]
tRP --------------------- ?? ---------- : [Auto]
tRAS ------------------- ?? ---------- : [Auto]
Advanced Timing Control
tRRD ------------------- ?? ---------- : [Auto]
tWTR ------------------- ?? ---------- : [Auto]
tWR --------------------- ?? ---------- : [Auto]
tRFC ------------------- ?? ---------- : [Auto]
tRTP ------------------- ?? ---------- : [Auto]
Command Rate (CMD) -------------------- : [Auto]
Driving Strength Profiles
Driving Strength --------- : Press Enter
Channel A
Static tRead Value --------------------- : [Auto]
tRD Phase0 Adjustment ------------------ : [Auto]
tRD Phase1 Adjustment ------------------ : [Auto]
tRD Phase2 Adjustment ------------------ : [Auto]
tRD Phase3 Adjustment ------------------ : [Auto]
Trd2rd(Different Rank) ----------------- : [Auto]
Twr2wr(Different Rank) ----------------- : [Auto]
Twr2rd(Different Rank) ----------------- : [Auto]
Trd2wr(Same/Diff Rank) ----------------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto] ps
Dimm2 Clock Skew Control --------------- : [Auto] ps
Channel B
Static tRead Value --------------------- : [Auto]
tRD Phase0 Adjustment ------------------ : [Auto]
tRD Phase1 Adjustment ------------------ : [Auto]
tRD Phase2 Adjustment ------------------ : [Auto]
tRD Phase3 Adjustment ------------------ : [Auto]
Trd2rd(Different Rank) ----------------- : [Auto]
Twr2wr(Different Rank) ----------------- : [Auto]
Twr2rd(Different Rank) ----------------- : [Auto]
Trd2wr(Same/Diff Rank) ----------------- : [Auto]
Dimm1 Clock Skew Control --------------- : [Auto] ps
Dimm2 Clock Skew Control --------------- : [Auto] ps
Motherboard Voltage Control
CPU
Voltage Types------------ Normal -------- Current -----
Load-Line Calibration ----------------- : [Disabled]
CPU Vcore --------------- ?.????? ---- : [Auto]
CPU Termination --------- ?.???V* ----- : [Auto]
CPU PLL ----------------- ?.???V* ----- : [Auto]
CPU Reference ----------- ?.???V* ----- : [Auto]
CPU Reference2 ---------- ?.???V* ----- : [Auto]
MCH/ICH
MCH Core ---------------- ?.???V ------- : [Auto]
MCH Reference ----------- ?.???V ------- : [Auto]
MCH/DRAM Ref ------------ ?.???V ------ : [Auto]
ICH I/O ----------------- ?.???V ------- : [Auto]
ICH Core ---------------- ?.???V ------- : [Auto]
DRAM
DRAM Voltage ------------ ?.???V ------- : [Auto]
DRAM Termination -------- ?.???V ------- : [Auto]
Channel A Reference ----- ?.???V ------- : [Auto]
Channel B Reference ----- ?.???V ------- : [Auto]
Advanced Settings
Limit CPUID Max. to 3 ------------------ : [Disabled]
No-Execute Memory Protect -------------- : [Enabled]
CPU Enhanced Halt (C1E) ---------------- : [Disabled]
C2/C2E State Support ------------------- : [Disabled]
x C4/C4E State Support ----------------- : [Disabled]
CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
CPU EIST Function --------------------- : [Disabled]
Virtualization Technology -------------- : [Disabled]
Integrated Peripherals
Legacy USB Storage Detect ------------- : [Disabled]