I was lucky enough to test the new bike this past weekend at my LBS. What an amazing bike and it was tons of fun. That thing just wants to keep pulling and pulling you forward. I actually got to test both a 56 and a 58. Couple questions regarding the fitment. I'm 6'0 with a longer torso and shorter legs, probably 30-31 inseam. I first test rode the 58. Since I was just demo'ing the bike from the floor, the shop didn't go through any adjustments except for the seat height. The 58 had the large stack of spacers under the stem as well. This bike felt pretty comfortable, but I could definitely do without the spacers and lower down the stack. The reach felt a tad long on the 58. Then they had a 56 demo bike, which had the slammed stem, and I believe the stock but slightly shorter stem. This bike actually felt pretty good as well, I might need one spacer on there to increase the stack, but when sprinting my knees were getting a little close to the handlebar. I would think this could also be solved with a slightly longer stem. So, the shop thought a 58 would be better for me, but just wanted to see what you thought. I know this is kinda subjective and without going through the full fit process it's hard to say. I just want to make sure I pick the right size. Sounds like I could do a 56 with some riser and a longer stem, or a 58 with no risers, and a shorter stem.
I have had different shops tell me I fit a 56 Tarmac or a 58 Tarmac for reference. So I think I am borderline right in the middle of the sizing.
Appreciate the feedback!