2016-08-07

Hello!

I am at a loss which of 32-bit ARM images http://www.funtoo.org/Subarchesto download to try to install on BananaPRO http://wiki.lemaker.org/BananaPro/Pi:Quick_Start

If someone knows which of the images is appropriate, or can authoritativelly inform me that the device is not supported, please do it here. Thanks in advance.

Info on the device follows below:

Script started on Sun 07 Aug 2016 12:07:47 PM UTC

[1m[7m#[27m[1m[0m]0;root@bananapi: ~ [0m[27m[24m[J[1m[31m[39m[0m[1m[31mroot[39m[0m@bananapi [1m~ [0m# [K[?1h=ddmesg[?1l>

]0;root@bananapi: dmesg[32m[    0.000000] [0mBooting Linux on physical CPU 0

[32m[    0.000000] [0mInitializing cgroup subsys cpuset

[32m[    0.000000] [0mInitializing cgroup subsys cpu

[32m[    0.000000] [0mLinux version 3.4.111-bananian (root@bananian-build) (gcc version 4.9.2 (Debian 4.9.2-10) ) #5 SMP PREEMPT Fri Mar 25 17:24:42 UTC 2016

[32m[    0.000000] [0m[33mCPU[0m: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d

[32m[    0.000000] [0m[33mCPU[0m: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[32m[    0.000000] [0m[33mMachine[0m: sun7i

[32m[    0.000000] [0mMemory Reserved:

[32m[    0.000000] [0m[33m    SYS  [0m: 0x43000000 - 0x4300ffff  (  64 kB)

[32m[    0.000000] [0m[33m    LCD  [0m: 0x44000000 - 0x45ffffff  (  32 MB)

[32m[    0.000000] [0m[33mMemory policy[0m: ECC disabled, Data cache writealloc

[32m[    0.000000] [0m[33msunxi[0m: Allwinner A20 (AW1651/sun7i) detected.

[32m[    0.000000] [0m[33mOn node 0 totalpages[0m: 262144

[32m[    0.000000] [0m[33mfree_area_init_node[0m: node 0, pgdat c0902b00, node_mem_map d0000000

[32m[    0.000000] [0m[33m  DMA zone[0m: 512 pages used for memmap

[32m[    0.000000] [0m[33m  DMA zone[0m: 0 pages reserved

[32m[    0.000000] [0m[33m  DMA zone[0m: 65024 pages, LIFO batch:15

[32m[    0.000000] [0m[33m  Normal zone[0m: 1008 pages used for memmap

[32m[    0.000000] [0m[33m  Normal zone[0m: 128016 pages, LIFO batch:31

[32m[    0.000000] [0m[33m  HighMem zone[0m: 528 pages used for memmap

[32m[    0.000000] [0m[33m  HighMem zone[0m: 67056 pages, LIFO batch:15

[32m[    0.000000] [0m[33mPERCPU[0m: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768

[32m[    0.000000] [0m[33mpcpu-alloc[0m: s7616 r8192 d12864 u32768 alloc=8*4096

[32m[    0.000000] [0m[33mpcpu-alloc[0m: [0] 0 [0] 1

[32m[    0.000000] [0m[33mBuilt 1 zonelists in Zone order, mobility grouping on.  Total pages[0m: 260096

[32m[    0.000000] [0m[33mKernel command line[0m: console=ttyS0,115200 console=tty0 console=tty1 sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1680x1050p60 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait

[32m[    0.000000] [0m[33mPID hash table entries[0m: 4096 (order: 2, 16384 bytes)

[32m[    0.000000] [0m[33mDentry cache hash table entries[0m: 131072 (order: 7, 524288 bytes)

[32m[    0.000000] [0m[33mInode-cache hash table entries[0m: 65536 (order: 6, 262144 bytes)

[32m[    0.000000] [0mallocated 2097152 bytes of page_cgroup

[32m[    0.000000] [0mplease try 'cgroup_disable=memory' option if you don't want memory cgroups

[32m[    0.000000] [0m[33mMemory[0m: 1024MB = 1024MB total

[32m[    0.000000] [0m[33mMemory[0m: 993496k/993496k available, 55080k reserved, 270336K highmem

[32m[    0.000000] [0mVirtual kernel memory layout:

[32m[    0.000000] [0m[33m    vector  [0m: 0xffff0000 - 0xffff1000   (   4 kB)

[32m[    0.000000] [0m[33m    fixmap  [0m: 0xfff00000 - 0xfffe0000   ( 896 kB)

[32m[    0.000000] [0m[33m    vmalloc [0m: 0xf0000000 - 0xff000000   ( 240 MB)

[32m[    0.000000] [0m[33m    lowmem  [0m: 0xc0000000 - 0xef800000   ( 760 MB)

[32m[    0.000000] [0m[33m    pkmap   [0m: 0xbfe00000 - 0xc0000000   (   2 MB)

[32m[    0.000000] [0m[33m    modules [0m: 0xbf000000 - 0xbfe00000   (  14 MB)

[32m[    0.000000] [0m[33m      .text [0m: 0xc0008000 - 0xc085a2dc   (8521 kB)

[32m[    0.000000] [0m[33m      .init [0m: 0xc085b000 - 0xc0894dc0   ( 232 kB)

[32m[    0.000000] [0m[33m      .data [0m: 0xc0896000 - 0xc090a820   ( 467 kB)

[32m[    0.000000] [0m[33m       .bss [0m: 0xc090a844 - 0xc0ada520   (1856 kB)

[32m[    0.000000] [0m[33mSLUB[0m: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[32m[    0.000000] [0mPreemptible hierarchical RCU implementation.

[32m[    0.000000] [0m    RCU dyntick-idle grace-period acceleration is enabled.

[32m[    0.000000] [0m    Additional per-CPU info printed with stalls.

[32m[    0.000000] [0mNR_IRQS:192

[32m[    0.000000] [0mArchitected local timer running at 24.00MHz.

[32m[    0.000000] [0m[33msched_clock[0m: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

[32m[    0.000000] [0m[33mstart_kernel()[0m[1m[31m: bug: interrupts were enabled early[0m

[32m[    0.000000] [0m[33mConsole[0m: colour dummy device 80x30

[32m[    0.000000] [0mconsole [tty0] enabled

[32m[    0.013772] [0mCalibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)

[32m[    0.076011] [0m[33mpid_max[0m: default: 32768 minimum: 301

[32m[    0.079691] [0m[33mMount-cache hash table entries[0m: 512

[32m[    0.083927] [0mInitializing cgroup subsys cpuacct

[32m[    0.087269] [0mInitializing cgroup subsys memory

[32m[    0.090703] [0mInitializing cgroup subsys devices

[32m[    0.094150] [0mInitializing cgroup subsys freezer

[32m[    0.097385] [0mInitializing cgroup subsys blkio

[32m[    0.101070] [0mInitializing cgroup subsys perf_event

[32m[    0.104661] [0m[33mCPU[0m: Testing write buffer coherency: ok

[32m[    0.109873] [0m[33mCPU0[0m: thread -1, cpu 0, socket 0, mpidr 80000000

[32m[    0.117000] [0m[33mhw perfevents[0m: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available

[32m[    0.122565] [0mSetting up static identity map for 0x405cf850 - 0x405cf8a8

[32m[    0.238590] [0m[33mCPU1[0m: Booted secondary processor

[32m[    0.297498] [0m[33mCPU1[0m: thread -1, cpu 1, socket 0, mpidr 80000001

[32m[    0.299511] [0mBrought up 2 CPUs

[32m[    0.304851] [0m[33mSMP[0m: Total of 2 processors activated (3640.52 BogoMIPS).

[32m[    0.308116] [0m[33mdevtmpfs[0m: initialized

[32m[    0.313865] [0m[33mdummy[0m:

[32m[    0.317568] [0m[33mNET[0m: Registered protocol family 16

[32m[    0.323933] [0m[33mDMA[0m: preallocated 256 KiB pool for atomic coherent allocations

[32m[    0.331727] [0m[33mhw-breakpoint[0m: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[32m[    0.336614] [0m[33mhw-breakpoint[0m: maximum watchpoint size is 8 bytes.

[32m[    0.339781] [0m[ccu-inf] aw clock manager init

[32m[    0.342062] [0m[ccu-inf] aw_ccu_init

[32m[    0.346051] [0m[ccu-inf] script config pll3 to 297MHz

[32m[    0.349815] [0m[ccu-inf] script config pll4 to 300MHz

[32m[    0.353573] [0m[ccu-inf] script config pll6 to 600MHz

[32m[    0.357346] [0m[ccu-inf] script config pll7 to 297MHz

[32m[    0.361103] [0m[ccu-inf] script config pll8 to 336MHz

[32m[    0.363886] [0mInit eGon pin module V2.0

[32m[    0.373624] [0m[33mbio[0m: create slab <bio-0> at 0

[32m[    0.377294] [0msunxi_gpio driver init ver 1.3

[32m[    0.383632] [0m[33mgpiochip_add[0m: registered GPIOs 1 to 88 on device: A1X_GPIO

[32m[    0.386835] [0mSCSI subsystem initialized

[32m[    0.389702] [0mlibata version 3.00 loaded.

[32m[    0.394424] [0m[33musbcore[0m: registered new interface driver usbfs

[32m[    0.398778] [0m[33musbcore[0m: registered new interface driver hub

[32m[    0.402960] [0m[33musbcore[0m: registered new device driver usb

[32m[    0.406156] [0m[33mLinux media interface[0m: v0.10

[32m[    0.409789] [0m[33mLinux video capture interface[0m: v2.00

[32m[    0.415581] [0mAdvanced Linux Sound Architecture Driver Version 1.0.25.

[32m[    0.420625] [0mSwitching to clocksource arch_sys_counter

[32m[    0.422733] [0m[33mFS-Cache[0m: Loaded

[32m[    0.424914] [0m[33mCacheFiles[0m: Loaded

[32m[    0.438345] [0m[33mWRN:L287(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR[0m: det_vbus pin is invaild

[32m[    0.445696] [0m[33mWRN:L426(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR[0m: check_usb_board_info failed

[32m[    0.453354] [0m[33mWRN:L480(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR[0m: get_usb_cfg failed

[32m[    0.459635] [0m[33mNET[0m: Registered protocol family 2

[32m[    0.476253] [0m[33mIP route cache hash table entries[0m: 32768 (order: 5, 131072 bytes)

[32m[    0.483221] [0m[33mTCP established hash table entries[0m: 131072 (order: 8, 1048576 bytes)

[32m[    0.490789] [0m[33mTCP bind hash table entries[0m: 65536 (order: 7, 786432 bytes)

[32m[    0.497477] [0m[33mTCP[0m: Hash tables configured (established 131072 bind 65536)

[32m[    0.499678] [0m[33mTCP[0m: reno registered

[32m[    0.504563] [0m[33mUDP hash table entries[0m: 512 (order: 2, 16384 bytes)

[32m[    0.509929] [0m[33mUDP-Lite hash table entries[0m: 512 (order: 2, 16384 bytes)

[32m[    0.513556] [0m[33mNET[0m: Registered protocol family 1

[32m[    0.518930] [0m[33mRPC[0m: Registered named UNIX socket transport module.

[32m[    0.522612] [0m[33mRPC[0m: Registered udp transport module.

[32m[    0.526341] [0m[33mRPC[0m: Registered tcp transport module.

[32m[    0.531745] [0m[33mRPC[0m: Registered tcp NFSv4.1 backchannel transport module.

[32m[    0.537371] [0m[33maudit[0m: initializing netlink socket (disabled)

[32m[    0.541093] [0m[33mtype=2000 audit(0.520:1)[0m: initialized

[32m[    0.545402] [0m[33mhighmem bounce pool size[0m: 64 pages

[32m[    0.557374] [0m[33mVFS[0m: Disk quotas dquot_6.5.2

[32m[    0.562879] [0m[33mDquot-cache hash table entries[0m: 1024 (order 0, 4096 bytes)

[32m[    0.570053] [0m[33msquashfs[0m: version 4.0 (2009/01/31) Phillip Lougher

[32m[    0.574751] [0m[33mNFS[0m: Registering the id_resolver key type

[32m[    0.579333] [0m[33mNTFS driver 2.1.30 [Flags[0m: R/W].

[32m[    0.582858] [0mfuse init (API version 7.18)

[32m[    0.586416] [0mmsgmni has been set to 1412

[32m[    0.593726] [0m[33malg[0m: No test for stdrng (krng)

[32m[    0.600483] [0mBlock layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[32m[    0.603526] [0mio scheduler noop registered

[32m[    0.607669] [0mio scheduler deadline registered (default)

[32m[    0.610517] [0mio scheduler cfq registered

[32m[    0.615346] [0msunxi disp driver loaded (/dev/disp api 1.0)

[32m[    0.621004] [0m[33mSerial[0m: 8250/16550 driver, 32 ports, IRQ sharing disabled

[32m[    0.629226] [0m[33m[uart][0m: used uart info.: 0x8d

[32m[    0.633946] [0m[33m[uart][0m: serial probe 0 irq 33 mapbase 0x01c28000

[32m[    0.660311] [0m[33msunxi-uart.0[0m: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A

[32m[    1.265287] [0mconsole [ttyS0] enabled

[32m[    1.273665] [0m[33m[uart][0m: serial probe 2 irq 35 mapbase 0x01c28800

[32m[    1.305569] [0m[33msunxi-uart.2[0m: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A

[32m[    1.317405] [0m[33m[uart][0m: serial probe 3 irq 36 mapbase 0x01c28c00

[32m[    1.349283] [0m[33msunxi-uart.3[0m: ttyS2 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A

[32m[    1.361089] [0m[33m[uart][0m: serial probe 7 irq 52 mapbase 0x01c29c00

[32m[    1.392954] [0m[33msunxi-uart.7[0m: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A

[32m[    1.402520] [0m[33mG2D[0m: drv_g2d_init

[32m[    1.405901] [0m[33mG2D[0m: Module initialized.major:250

[32m[    1.419363] [0m[33mbrd[0m: module loaded

[32m[    1.427874] [0m[33mloop[0m: module loaded

[32m[    1.530911] [0mSATA AHCI Phy Power Failed!!

[32m[    1.630724] [0mSATA AHCI Phy Calibration Failed!!

[32m[    1.634050] [0m[33mgpio count < =0 ,gpio_count is[0m[31m: 0[0m

[32m[    1.644330] [0m[33msw_ahci sw_ahci.0[0m: controller can't do PMP, turning off CAP_PMP

[32m[    1.655571] [0m[33msw_ahci sw_ahci.0[0m[1m: forcing PORTS_IMPL to 0x1[0m

[32m[    1.668339] [0m[33msw_ahci sw_ahci.0[0m: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode

[32m[    1.683237] [0m[33msw_ahci sw_ahci.0[0m: flags: ncq sntf pm led clo only pio slum part ccc

[32m[    1.694096] [0m[33mscsi0 [0m: sw_ahci_platform

[32m[    1.704871] [0m[33mata1[0m: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88

[32m[    1.717040] [0m[33mFixed MDIO Bus[0m: probed

[32m[    1.725199] [0m[33meth%d[0m[1m: device MAC address 02:17:04:40:c0:cc[0m

[32m[    1.733455] [0mgmac_para gpio count is 18

[32m[    1.738679] [0m[33m[gmac][0m: sun6i_gmac platform driver registration completed

[32m[    1.741943] [0mPPP generic driver version 2.4.2

[32m[    1.750196] [0mPPP BSD Compression module registered

[32m[    1.758930] [0mPPP Deflate Compression module registered

[32m[    1.767398] [0m[33mNET[0m: Registered protocol family 24

[32m[    1.777630] [0m[33mehci_hcd[0m: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[32m[    1.789380] [0m[33mohci_hcd[0m: USB 1.1 'Open' Host Controller (OHCI) Driver

[32m[    1.798024] [0m[33m[sw-ehci1][0m: open clock

[32m[    1.820711] [0m[33m[sw-ehci1][0m: Set USB Power ON

[32m[    1.827165] [0m[33msw-ehci sw-ehci.1[0m: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[32m[    1.840896] [0m[33msw-ehci sw-ehci.1[0m: new USB bus registered, assigned bus number 1

[32m[    1.852350] [0m[33msw-ehci sw-ehci.1[0m: irq 71, io mem 0x01c14000

[32m[    1.875071] [0m[33msw-ehci sw-ehci.1[0m: USB 2.0 started, EHCI 1.00

[32m[    1.886334] [0m[33musb usb1[0m: New USB device found, idVendor=1d6b, idProduct=0002

[32m[    1.899316] [0m[33musb usb1[0m: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[32m[    1.912985] [0m[33musb usb1[0m: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[32m[    1.925705] [0m[33musb usb1[0m: Manufacturer: Linux 3.4.111-bananian ehci_hcd

[32m[    1.935123] [0m[33musb usb1[0m: SerialNumber: sw-ehci

[32m[    1.942570] [0m[33mhub 1-0:1.0[0m: USB hub found

[32m[    1.949247] [0m[33mhub 1-0:1.0[0m: 1 port detected

[32m[    1.955781] [0m[33m[sw-ohci1][0m: open clock

[32m[    1.981926] [0m[33msw-ohci sw-ohci.1[0m: SW USB2.0 'Open' Host Controller (OHCI) Driver

[32m[    1.995348] [0m[33msw-ohci sw-ohci.1[0m: new USB bus registered, assigned bus number 2

[32m[    2.006722] [0m[33msw-ohci sw-ohci.1[0m: irq 96, io mem 0x01c14400

[32m[    2.065090] [0m[33mata1[0m: SATA link down (SStatus 0 SControl 300)

[32m[    2.080540] [0m[33musb usb2[0m: New USB device found, idVendor=1d6b, idProduct=0001

[32m[    2.093525] [0m[33musb usb2[0m: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[32m[    2.106849] [0m[33musb usb2[0m: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver

[32m[    2.119219] [0m[33musb usb2[0m: Manufacturer: Linux 3.4.111-bananian ohci_hcd

[32m[    2.128634] [0m[33musb usb2[0m: SerialNumber: sw-ohci

[32m[    2.136073] [0m[33mhub 2-0:1.0[0m: USB hub found

[32m[    2.142718] [0m[33mhub 2-0:1.0[0m: 1 port detected

[32m[    2.149251] [0m[33m[sw-ehci2][0m: open clock

[32m[    2.171933] [0m[33m[sw-ehci2][0m: Set USB Power ON

[32m[    2.178383] [0m[33msw-ehci sw-ehci.2[0m: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[32m[    2.192113] [0m[33msw-ehci sw-ehci.2[0m: new USB bus registered, assigned bus number 3

[32m[    2.203564] [0m[33msw-ehci sw-ehci.2[0m: irq 72, io mem 0x01c1c000

[32m[    2.225069] [0m[33msw-ehci sw-ehci.2[0m: USB 2.0 started, EHCI 1.00

[32m[    2.233091] [0m[33mehci_irq[0m: port change detect

[32m[    2.238831] [0m[33musb usb3[0m: New USB device found, idVendor=1d6b, idProduct=0002

[32m[    2.251777] [0m[33musb usb3[0m: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[32m[    2.265416] [0m[33musb usb3[0m: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

[32m[    2.278103] [0m[33musb usb3[0m: Manufacturer: Linux 3.4.111-bananian ehci_hcd

[32m[    2.287490] [0m[33musb usb3[0m: SerialNumber: sw-ehci

[32m[    2.294505] [0m[33mhub 3-0:1.0[0m: USB hub found

[32m[    2.301153] [0m[33mhub 3-0:1.0[0m: 1 port detected

[32m[    2.307691] [0m[33m[sw-ohci2][0m: open clock

[32m[    2.333835] [0m[33msw-ohci sw-ohci.2[0m: SW USB2.0 'Open' Host Controller (OHCI) Driver

[32m[    2.347214] [0m[33msw-ohci sw-ohci.2[0m: new USB bus registered, assigned bus number 4

[32m[    2.358597] [0m[33msw-ohci sw-ohci.2[0m: irq 97, io mem 0x01c1c400

[32m[    2.430544] [0m[33musb usb4[0m: New USB device found, idVendor=1d6b, idProduct=0001

[32m[    2.443532] [0m[33musb usb4[0m: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[32m[    2.456854] [0m[33musb usb4[0m: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver

[32m[    2.469216] [0m[33musb usb4[0m: Manufacturer: Linux 3.4.111-bananian ohci_hcd

[32m[    2.478631] [0m[33musb usb4[0m: SerialNumber: sw-ohci

[32m[    2.486066] [0m[33mhub 4-0:1.0[0m: USB hub found

[32m[    2.492711] [0m[33mhub 4-0:1.0[0m: 1 port detected

[32m[    2.500871] [0mInitializing USB Mass Storage driver...

[32m[    2.508490] [0m[33mehci_irq[0m: port change detect

[32m[    2.513456] [0m[33musbcore[0m: registered new interface driver usb-storage

[32m[    2.523050] [0mUSB Mass Storage support registered.

[32m[    2.532565] [0m[33mmousedev[0m: PS/2 mouse device common for all mice

[32m[    2.543210] [0m[33minput[0m: sunxi-ir as /devices/virtual/input/input0

[32m[    2.550431] [0mIR Initial OK

[32m[    2.555426] [0m[33msunxi-rtc sunxi-rtc[0m[31m: Warning: RTC time is wrong![0m

[32m[    2.566389] [0m[33msunxi-rtc sunxi-rtc[0m: rtc core: registered rtc as rtc0

[32m[    2.575089] [0mThe port change to OHCI now!

[32m[    2.577610] [0mi2c /dev entries driver

[32m[    2.584949] [0mconfig i2c gpio with gpio_config api

[32m[    2.590564] [0m[33maxp_mfd 0-0034[0m: AXP (CHIP ID: 0x41) detected

[32m[    2.601715] [0m[33maxp_mfd 0-0034[0m: AXP internal temperature monitoring enabled

[32m[    2.613568] [0m[AXP]axp driver uning configuration failed(342)

[32m[    2.615526] [0m[AXP]power_start = 0

[32m[    2.618588] [0m[33mI2C[0m: i2c-0: AW16XX I2C adapter

[32m[    2.626094] [0mconfig i2c gpio with gpio_config api

[32m[    2.629478] [0m[33mI2C[0m: i2c-1: AW16XX I2C adapter

[32m[    2.636984] [0mconfig i2c gpio with gpio_config api

[32m[    2.640328] [0m[33mI2C[0m: i2c-2: AW16XX I2C adapter

[32m[    2.647826] [0mconfig i2c gpio with gpio_config api

[32m[    2.651153] [0m[33mI2C[0m: i2c-3: AW16XX I2C adapter

[32m[    2.657065] [0m[ace_drv] start!!!

[32m[    2.659470] [0m[ace_drv] init end!!!

[32m[    2.661137] [0m[pa_drv] start!!!

[32m[    2.663384] [0m[pa_drv] init end!!!

[32m[    2.667477] [0mDriver for 1-wire Dallas network protocol.

[32m[    2.676838] [0m[33minvalid gpio pin in fex configuration [0m[31m: -1[0m

[32m[    2.684412] [0m[33maxp20_ldo1[0m: 1300 mV

[32m[    2.692879] [0m[33maxp20_ldo2[0m: 1800 <--> 3300 mV at 3000 mV

[32m[    2.703248] [0m[33maxp20_ldo3[0m: 700 <--> 3500 mV at 2800 mV

[32m[    2.713792] [0m[33maxp20_ldo4[0m: 1250 <--> 3300 mV at 2800 mV

[32m[    2.724215] [0m[33maxp20_buck2[0m: 700 <--> 2275 mV at 1450 mV

[32m[    2.735778] [0m[31msomebody is trying to set dcdc3 range to (1300000, 1300000) uV[0m

[32m[    2.747699] [0m[31mbut we keep dcdc3 = 1250000 uV from the bootloader[0m

[32m[    2.757794] [0m[33maxp20_buck3[0m: 700 <--> 3500 mV at 1250 mV

[32m[    2.767688] [0m[33maxp20_ldoio0[0m: 1800 <--> 3300 mV at 2800 mV

[32m[    2.782459] [0m[33minput[0m: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1

[32m[    2.810732] [0m[33maxp20_ldo2[0m[1m: Failed to create debugfs directory[0m

[32m[    2.821190] [0m[33mdevice-mapper[0m: uevent: version 1.0.3

[32m[    2.833682] [0m[33mdevice-mapper[0m: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

[32m[    2.838996] [0m[33musb 4-1[0m: new low-speed USB device number 2 using sw-ohci

[32m[    2.857106] [0m[33mcpuidle[0m: using governor ladder

[32m[    2.864115] [0m[33mcpuidle[0m: using governor menu

[32m[    2.870395] [0m[mmc-msg] sw_mci_init

[32m[    2.879446] [0m[33m[mmc-msg] MMC host used card[0m: 0x1, boot card: 0x0, io_card 0

[32m[    2.891387] [0m[mmc-msg] sdc0 set round clock 400000, src 24000000

[32m[    2.905619] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    2.922874] [0m[33m[mmc-msg] sdc0 Probe[0m: base:0xf0154000 irq:64 sg_cpu:f0156000(4fc00000) ret 0.

[32m[    2.935639] [0m[33m[mmc_pm][0m: failed to fetch sdio card configuration!

[32m[    2.938074] [0msunxi_leds driver init

[32m[    2.945547] [0m[33mRegistered led device[0m: green:ph24:led1

[32m[    2.950577] [0m[33mledtrig-cpu[0m: registered to indicate activity on CPUs

[32m[    2.963396] [0m[33musbcore[0m: registered new interface driver usbhid

[32m[    2.971814] [0m[33musbhid[0m: USB HID core driver

[32m[    2.978394] [0m[33mashmem[0m: initialized

[32m[    2.985210] [0m[33mlogger[0m: created 256K log 'log_main'

[32m[    2.993510] [0m[33mlogger[0m: created 256K log 'log_events'

[32m[    3.001976] [0m[33mlogger[0m: created 256K log 'log_radio'

[32m[    3.010393] [0m[33mlogger[0m: created 256K log 'log_system'

[32m[    3.020993] [0mIPv4 over IPv4 tunneling driver

[32m[    3.028024] [0m[33mTCP[0m: bic registered

[32m[    3.033551] [0m[33mTCP[0m: cubic registered

[32m[    3.039413] [0m[33mTCP[0m: westwood registered

[32m[    3.045659] [0m[33mTCP[0m: highspeed registered

[32m[    3.051601] [0m[33mTCP[0m: hybla registered

[32m[    3.057217] [0m[33mTCP[0m: htcp registered

[32m[    3.062730] [0m[33mTCP[0m: vegas registered

[32m[    3.068281] [0m[33mTCP[0m: veno registered

[32m[    3.074065] [0m[33mTCP[0m: scalable registered

[32m[    3.079680] [0m[33mTCP[0m: lp registered

[32m[    3.085335] [0m[33musb 4-1[0m: New USB device found, idVendor=13ba, idProduct=0018

[32m[    3.101133] [0m[33musb 4-1[0m: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[32m[    3.111563] [0m[33musb 4-1[0m: Product: Barcode Reader

[32m[    3.118147] [0m[33mTCP[0m: yeah registered

[32m[    3.123961] [0m[33mTCP[0m: illinois registered

[32m[    3.130776] [0mInitializing XFRM netlink socket

[32m[    3.139195] [0m[33mNET[0m: Registered protocol family 10

[32m[    3.152454] [0m[33minput[0m: Barcode Reader  as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.0/input/input2

[32m[    3.155858] [0m[33mNET[0m: Registered protocol family 17

[32m[    3.172380] [0m[33mNET[0m: Registered protocol family 15

[32m[    3.181419] [0m[33m[mmc_pm][0m: No sdio card, please check your config !!

[32m[    3.185111] [0mRegistering the dns_resolver key type

[32m[    3.195276] [0m[33mgeneric-usb 0003:13BA:0018.0001[0m: input,hidraw0: USB HID v1.10 Keyboard [Barcode Reader ] on usb-sw-ohci-1/input0

[32m[    3.213606] [0m[33mVFP support v0.3[0m: implementor 41 architecture 2 part 30 variant 7 rev 4

[32m[    3.229951] [0mRegistering SWP/SWPB emulation handler

[32m[    3.237597] [0m[33minput[0m: Barcode Reader  as /devices/platform/sw-ohci.2/usb4/4-1/4-1:1.1/input/input3

[32m[    3.260956] [0m[33mgeneric-usb 0003:13BA:0018.0002[0m: input,hidraw1: USB HID v1.10 Mouse [Barcode Reader ] on usb-sw-ohci-1/input1

[32m[    3.276803] [0m[33maxp20_buck2[0m[1m: Failed to create debugfs directory[0m

[32m[    3.288578] [0m[cpu_freq] INF:-------------------V-F Table-------------------

[32m[    3.300521] [0m[33m[cpu_freq] INF[0m:    voltage = 1450mv     frequency = 1008MHz

[32m[    3.311670] [0m[33m[cpu_freq] INF[0m:    voltage = 1425mv     frequency =  912MHz

[32m[    3.322815] [0m[33m[cpu_freq] INF[0m:    voltage = 1350mv     frequency =  864MHz

[32m[    3.333961] [0m[33m[cpu_freq] INF[0m:    voltage = 1250mv     frequency =  720MHz

[32m[    3.345107] [0m[33m[cpu_freq] INF[0m:    voltage = 1150mv     frequency =  528MHz

[32m[    3.356257] [0m[33m[cpu_freq] INF[0m:    voltage = 1100mv     frequency =  312MHz

[32m[    3.367403] [0m[33m[cpu_freq] INF[0m:    voltage = 1050mv     frequency =  144MHz

[32m[    3.378548] [0m[33m[cpu_freq] INF[0m:    voltage = 1000mv     frequency =    0MHz

[32m[    3.390472] [0m[cpu_freq] INF:-----------------------------------------------

[32m[    3.407087] [0m[33m[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq[0m: 912MHz, min freq: 720MHz

[32m[    3.421725] [0mregistered taskstats version 1

[32m[    3.431473] [0m[33m[DISP] Unsupported mode[0m[1m: 1680x1050p60, ignoring[0m

[32m[    3.440580] [0m[33mI2C[0m: i2c-4: HDMI I2C adapter

[32m[    3.471933] [0mParseEDID

[32m[    3.488906] [0m[33mEDID version[0m: 1.3

[32m[    3.497734] [0mPCLK=65000000 X 1024 1048 1184 1344 Y 768 771 777 806 fr 60 NN

[32m[    3.508460] [0mUsing above mode as preferred EDID mode

[32m[    3.529213] [0m[1mReserved SVD code 90[0m

[32m[    3.534560] [0m[1mReserved SVD code 0[0m

[32m[    3.539793] [0m[1mReserved SVD code 0[0m

[32m[    3.548797] [0m[33mdisp_clk[0m[1m: Could not find a matching pll-freq for 78800000 pclk[0m

[32m[    3.561512] [0m[33mdisp_clk[0m[1m: Could not find a matching pll-freq for 53450000 pclk[0m

[32m[    3.574227] [0m[33mdisp_clk[0m[1m: Could not find a matching pll-freq for 27100000 pclk[0m

[32m[    3.586937] [0m[33mdisp_clk[0m[1m: Could not find a matching pll-freq for 26150000 pclk[0m

[32m[    3.597405] [0m[33mParse_AudioData_Block[0m: max channel=2

[32m[    3.605949] [0m[33mParse_AudioData_Block[0m: SampleRate code=7

[32m[    3.614577] [0m[33mParse_AudioData_Block[0m: WordLen code=7

[32m[    3.622760] [0mFind HDMI Vendor Specific DataBlock

[32m[    3.631736] [0m[33mParse_VideoData_Block[0m: VIC 16 (native) support

[32m[    3.641580] [0m[33mParse_VideoData_Block[0m: VIC 4 (native) support

[32m[    3.650557] [0m[33mParse_VideoData_Block[0m: VIC 2 support

[32m[    3.660666] [0mPCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN

[32m[    3.672910] [0m[33masoc[0m: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok

[32m[    3.682308] [0mwaited 0 ms for EDID info

[32m[    3.692361] [0m[33mdisp clks[0m: lcd 65000000 pre_scale 1 hdmi 65000000 pll 195000000 2x 0

[32m[    3.899620] [0m[mmc-msg] mmc 0 detect change, present 1

[32m[    4.176076] [0m[33mConsole[0m: switching to colour frame buffer device 128x48

[32m[    4.204227] [0m[33maxp20_buck3[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.219830] [0m[33maxp20_buck2[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.230244] [0m[33maxp20_ldo4[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.240568] [0m[33maxp20_ldo3[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.250879] [0m[33maxp20_ldo2[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.261203] [0m[33maxp20_ldo1[0m[1m: incomplete constraints, leaving on[0m

[32m[    4.269743] [0mconsole [netcon0] enabled

[32m[    4.277037] [0m[33mnetconsole[0m: network logging started

[32m[    4.285877] [0m[33motg_wakelock_init[0m[31m: No USB transceiver found[0m

[32m[    4.298757] [0m[33msunxi-rtc sunxi-rtc[0m: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)

[32m[    4.309534] [0mALSA device list:

[32m[    4.315655] [0m[33m  #0[0m: sunxi-CODEC  Audio Codec

[32m[    4.321948] [0m[33m  #1[0m: sunxi-sndhdmi

[32m[    4.331192] [0m[33mmd[0m: Waiting for all devices to be available before autodetect

[32m[    4.342793] [0m[33mmd[0m: If you don't use raid, use raid=noautodetect

[32m[    4.352399] [0m[33mmd[0m: Autodetecting RAID arrays.

[32m[    4.360053] [0m[33mmd[0m: Scanned 0 and added 0 devices.

[32m[    4.366419] [0m[33mmd[0m: autorun ...

[32m[    4.375879] [0m[33mmd[0m: ... autorun DONE.

[32m[    4.387689] [0mWaiting for root device /dev/mmcblk0p2...

[32m[    4.408637] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.424526] [0m[mmc-msg] sdc0 power on

[32m[    4.459053] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.477954] [0m[mmc-msg] sdc0 set round clock 400000, src 24000000

[32m[    4.566385] [0m[31m[mmc-err] smc 0 err, cmd 52,  RTO[0m

[32m[    4.579451] [0m[31m[mmc-err] smc 0 err, cmd 52,  RTO[0m

[32m[    4.596591] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.621388] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.640753] [0m[31m[mmc-err] smc 0 err, cmd 5,  RTO[0m

[32m[    4.653726] [0m[31m[mmc-err] smc 0 err, cmd 5,  RTO[0m

[32m[    4.666584] [0m[31m[mmc-err] smc 0 err, cmd 5,  RTO[0m

[32m[    4.679428] [0m[31m[mmc-err] smc 0 err, cmd 5,  RTO[0m

[32m[    4.697194] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.719721] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.744517] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

[32m[    4.791360] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

[32m[    4.813745] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

[32m[    4.838098] [0m[mmc-msg] sdc0 set round clock 42857143, src 600000000

[32m[    4.912445] [0m[33m[mmc-msg] sdc0 set ios[0m: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B

[32m[    4.931217] [0m[33mmmc0[0m: new high speed SDHC card at address 0007

[32m[    4.945486] [0m[33mmmcblk0[0m: mmc0:0007 SL16G 14.4 GiB

[32m[    4.958107] [0m[33m mmcblk0[0m: p1 p2

[32m[    5.111049] [0m[33mEXT4-fs (mmcblk0p2)[0m: mounted filesystem without journal. Opts: (null)

[32m[    5.128615] [0m[33mVFS[0m: Mounted root (ext4 filesystem) on device 179:2.

[32m[    5.150856] [0m[33mdevtmpfs[0m: mounted

[32m[    5.161645] [0m[33mFreeing init memory[0m: 228K

[32m[    6.055718] [0m[33msystemd-udevd[156][0m: starting version 215

[32m[   17.680503] [0m[33mEXT4-fs (mmcblk0p2)[0m: re-mounted. Opts: (null)

[32m[   18.544554] [0mAdding 524284k swap on /swapfile1.  Priority:-1 extents:3 across:622588k SS

[32m[   20.449997] [0m[33m8021q[0m: 802.1Q VLAN Support v1.8

[32m[   24.083966] [0mGMAC gpio_power_hd:gpio_direction_output

[32m[   24.341916] [0m[33meth0[0m[1m: device MAC address 02:17:04:40:c0:cc[0m

[32m[   24.368262] [0m[33msunxi_gmac[0m: probed

[32m[   24.383587] [0m[33meth0[0m: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active

[32m[   24.401678] [0m[33meth0[0m: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)

[32m[   30.413920] [0m[33mPHY[0m: sunxi_gmac-0:00 - Link is Up - 1000/Full

[32m[   47.001370] [0m[33mEXT4-fs (mmcblk0p2)[0m: re-mounted. Opts: (null)

[1m[7m#[27m[1m[0m                                                                                  ]0;root@bananapi: ~ [0m[27m[24m[J[1m[31m[39m[0m[1m[31mroot[39m[0m@bananapi [1m~ [0m# [K[?1h=llscpu[?1l>

]0;root@bananapi: lscpuArchitecture:          armv7l

Byte Order:            Little Endian

CPU(s):                2

On-line CPU(s) list:   0,1

Thread(s) per core:    1

Core(s) per socket:    2

Socket(s):             1

CPU max MHz:           1008.0000

CPU min MHz:           60.0000

[1m[7m#[27m[1m[0m                                                                                  ]0;root@bananapi: ~ [0m[27m[24m[J[1m[31m[39m[0m[1m[31mroot[39m[0m@bananapi [1m~ [0m# [K[?1h=ccat /proc[1m/[0m[0m/cpuinfo[?1l>

]0;root@bananapi: cat /proc/cpuinfoProcessor    : ARMv7 Processor rev 4 (v7l)

processor    : 0

BogoMIPS    : 1195.38

processor    : 1

BogoMIPS    : 1199.69

Features    : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt

CPU implementer    : 0x41

CPU architecture: 7

CPU variant    : 0x0

CPU part    : 0xc07

CPU revision    : 4

Hardware    : sun7i

Revision    : 0000

Serial        : 0440c0cc485448488051828716516617

[1m[7m#[27m[1m[0m                                                                                  ]0;root@bananapi: ~ [0m[27m[24m[J[1m[31m[39m[0m[1m[31mroot[39m[0m@bananapi [1m~ [0m# [K[?1h=

Script done on Sun 07 Aug 2016 12:08:25 PM UTC

Show more