pikus_09 wrote:
Spildit wrote:
I don't know why you did ERASE TRACKS of SA.
Do all again but this time as soon as you LOAD OVERLAYS and you get correct drive detection with S# XYZ go to RAM and EDIT DIR in RAM. Load DIR from you file (mod 01). Save to RAM !!! No go to S/A operations and write all modules. Done.
OK, because erase track I treat as a full-format areas SA. DFL company, and ACE lab recommend Erase Track
before writing Sa mods,Btw, your method not work, sitation the same.
Spildit wrote:
And STOP USING that Restart FW thing. Just power off/on the drive !!!
Ok.
Spildit wrote:
Oh ... and of course ... did you block SA access by editing FW zones on ROM ??? If so go to RAM and edit it back on RAM !!!!
You will want to have correct zones + correct DIR on RAM first and only then you should write modules from backup !!!
Otherwise it will not write or will write to incorrect place !!!!
Ok, I write modules in original correct place, and Click, Click, click, click, click 
something seems to me that the PCB is damaged after these hits 
they recommend to Erase tracks and this is useless step
you already format SA , or Write new FW , no need to erase track at this step
and i would like to repair this case online
if you are interest PM Me
or add me on Skype ID : hpwlab
Statistics: Posted by hpw333 — Today, 4:49