2016-08-16

Welcome to Octoplus/Octopus Box LG Software version 2.3.9

--------------------------------------------------------------------------------

Checking data...OK

Platform: LG Qualcomm

Selected port: COM1

Selected model: D821

Reading info...

Initializing ADB...OK

Waiting for phone...

Please, reconnect phone, enable USB debugging, and try again.

To enable USB debugging, please perform the following steps:

1. Disconnect cable

2. Install LG Android ADB drivers

3. Go to "Settings" -> "About phone" -> "Software information"

4. Click on Build number 5 times

5. Enable "Settings" -> "Developer options" -> "USB debugging" option

6. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager.OK

Model ID: Nexus 5

Firmware version:

Kernel version: 3.4.0-g9eb14ba (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP

PREEMPT Tue Oct 22 15:43:47 PDT 201

Android version: 4.4

Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)

ARMv7 Processor rev 0 (v7l)

Switching to Fastboot mode...OK

Unlocking Bootloader...

Bootloader is unlocked.

Writing Bootloader...OK

Please, wait while the phone will turn on and press "Ok" button.

Trying to enable Diagnostics ports...

Initializing ADB...OK

Waiting for phone...OK

Checking root access...

Phone is already rooted.

Diagnostics ports are enbled!

Switching to Serial Port...

Found model AAAAANAZ*ÿh° at port COM6

Reading info...

Mode: Normal

Firmware compiled date: Oct 01 2013

Firmware compiled time: 17:00:00

Firmware released date: Oct 11 2013

Firmware released time: 19:06:09

SW Version: M8974A-1.0.25.0.17

SPC: 000000

Fixing IMEI...

New IMEI: 353180-00-000133-2

Skip Read/Write QCN

Switching to Download mode...Failed!

Please perform the following steps:

1. Disconnect cable

2. Put phone into download mode manually (Power phone OFF, press and

hold "Vol+" button and connect the cable (or P990 cable))

3. Connect cable and press "Ok" button.

Initializing flash...OK

Reading partitions...OK

Reading security area...OK

Backup saved to "D821_Bad_16-08-2016_06-24-57.SEC"

Writing security area...OK

Switching to Normal mode...

Please perform the following steps:

1. Wait while the phone will turn on

2. Reboot the phone

3. Enable "USB debugging" Mode

4. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager

5. Press "Ok" button.

Initializing ADB...OK

Waiting for phone...OK

Switching to Fastboot mode...OK

Unlocking Bootloader...

Select "Yes" on phone screen and press "Power" button.

Please perform the following steps:

1. Wait while the phone will turn on

2. Reboot the phone

3. Enable "USB debugging" Mode

4. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager

5. Press "Ok" button.

Initializing ADB...OK

Waiting for phone...

Please, reconnect phone, enable USB debugging, and try again.

To enable USB debugging, please perform the following steps:

1. Disconnect cable

2. Install LG Android ADB drivers

3. Go to "Settings" -> "About phone" -> "Software information"

4. Click on Build number 5 times

5. Enable "Settings" -> "Developer options" -> "USB debugging" option

6. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager.Failed!

Please, reconnect phone, enable USB debugging, and try again.

To enable USB debugging, please perform the following steps:

1. Disconnect cable

2. Install LG Android ADB drivers

3. Go to "Settings" -> "About phone" -> "Software information"

4. Click on Build number 5 times

5. Enable "Settings" -> "Developer options" -> "USB debugging" option

6. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager.

Performed by 2.3.9 software version.

--------------------------------------------------------------------------------

Checking data...OK

Platform: LG Qualcomm

Selected port: COM1

Selected model: D821

Reading info...

Initializing ADB...OK

Waiting for phone...OK

Model ID: Nexus 5

Firmware version:

Kernel version: 3.4.0-g9eb14ba (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP

PREEMPT Tue Oct 22 15:43:47 PDT 201

Android version: 4.4

Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)

ARMv7 Processor rev 0 (v7l)

Switching to Fastboot mode...OK

Unlocking Bootloader...

Bootloader is unlocked.

Writing Bootloader...OK

Please, wait while the phone will turn on and press "Ok" button.

Trying to enable Diagnostics ports...

Initializing ADB...OK

Waiting for phone...Failed!

Please, reconnect phone, enable USB debugging, and try again.

To enable USB debugging, please perform the following steps:

1. Disconnect cable

2. Install LG Android ADB drivers

3. Go to "Settings" -> "About phone" -> "Software information"

4. Click on Build number 5 times

5. Enable "Settings" -> "Developer options" -> "USB debugging" option

6. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager.

Performed by 2.3.9 software version.

--------------------------------------------------------------------------------

Checking data...OK

Platform: LG Qualcomm

Selected port: COM1

Selected model: D821

Reading info...

Initializing ADB...OK

Waiting for phone...OK

Model ID: Nexus 5

Firmware version:

Kernel version: 3.4.0-g9eb14ba (lai@myhost) (gcc version 4.7 (GCC) ) #3

SMP PREEMPT Tue Nov 26 12:04:50 CST 201

Android version: 4.4

Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)

ARMv7 Processor rev 0 (v7l)

Switching to Fastboot mode...OK

Unlocking Bootloader...

Bootloader is unlocked.

Writing Bootloader...OK

Please, wait while the phone will turn on and press "Ok" button.

Trying to enable Diagnostics ports...

Initializing ADB...OK

Waiting for phone...OK

Checking root access...

Phone is already rooted.

Diagnostics ports are enbled!

Switching to Serial Port...

Found model AAAAANAZ*ÿh° at port COM6

Reading info...

Mode: Normal

Firmware compiled date: Oct 01 2013

Firmware compiled time: 17:00:00

Firmware released date: Oct 11 2013

Firmware released time: 19:06:09

SW Version: M8974A-1.0.25.0.17

SPC: 000000

Fixing IMEI...

New IMEI: 353180-00-000133-2

Skip Read/Write QCN

Switching to Download mode...OK

Initializing flash...OK

Reading partitions...OK

Reading security area...OK

Backup saved to "D821_Bad_16-08-2016_06-38-27.SEC"

Writing security area...OK

Switching to Normal mode...

Please perform the following steps:

1. Wait while the phone will turn on

2. Reboot the phone

3. Enable "USB debugging" Mode

4. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager

5. Press "Ok" button.

Initializing ADB...OK

Waiting for phone...OK

Switching to Fastboot mode...OK

Unlocking Bootloader...

Select "Yes" on phone screen and press "Power" button.

Please perform the following steps:

1. Wait while the phone will turn on

2. Reboot the phone

3. Enable "USB debugging" Mode

4. Connect the cable and check, whether ADB interface has appeared in

PC Device Manager

5. Press "Ok" button.

Initializing ADB...OK

Waiting for phone...OK

Switching to Fastboot mode...OK

Bootloader is unlocked.

Writing Bootloader...OK

Please, wait while the phone will turn on and press "Ok" button.

Trying to enable Diagnostics ports...

Initializing ADB...OK

Waiting for phone...OK

Checking root access...

Phone is already rooted.

Diagnostics ports are enbled!

Switching to Serial Port...

Found model AAAAANAZ*ÿh° at port COM6

IMEI successfully fixed!

To complete the operation, please make Factory Reset (Go to "Settings" ->

"General" -> "Backup & reset" -> "Factory data reset", press "Reset

phone" and "Erase everything" buttons).

Performed by 2.3.9 software version.

Show more