Welcome to Octoplus/Octopus Box LG Software version 2.3.9
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: D821
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP
PREEMPT Tue Oct 22 15:43:47 PDT 201
Android version: 4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ*ÿh° at port COM6
Reading info...
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Oct 11 2013
Firmware released time: 19:06:09
SW Version: M8974A-1.0.25.0.17
SPC: 000000
Fixing IMEI...
New IMEI: 353180-00-000133-2
Skip Read/Write QCN
Switching to Download mode...Failed!
Please perform the following steps:
1. Disconnect cable
2. Put phone into download mode manually (Power phone OFF, press and
hold "Vol+" button and connect the cable (or P990 cable))
3. Connect cable and press "Ok" button.
Initializing flash...OK
Reading partitions...OK
Reading security area...OK
Backup saved to "D821_Bad_16-08-2016_06-24-57.SEC"
Writing security area...OK
Switching to Normal mode...
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Select "Yes" on phone screen and press "Power" button.
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.3.9 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: D821
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP
PREEMPT Tue Oct 22 15:43:47 PDT 201
Android version: 4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.3.9 software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: D821
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba (lai@myhost) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ*ÿh° at port COM6
Reading info...
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Oct 11 2013
Firmware released time: 19:06:09
SW Version: M8974A-1.0.25.0.17
SPC: 000000
Fixing IMEI...
New IMEI: 353180-00-000133-2
Skip Read/Write QCN
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Reading security area...OK
Backup saved to "D821_Bad_16-08-2016_06-38-27.SEC"
Writing security area...OK
Switching to Normal mode...
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Unlocking Bootloader...
Select "Yes" on phone screen and press "Power" button.
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager
5. Press "Ok" button.
Initializing ADB...OK
Waiting for phone...OK
Switching to Fastboot mode...OK
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Found model AAAAANAZ*ÿh° at port COM6
IMEI successfully fixed!
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).
Performed by 2.3.9 software version.