Hello Remodelaholic readers! There are none words for how excited I am to have existence contributing to Remodelaholic! I am Tasha and I blog from one side of to the other at Designer Trapped in a Lawyer’s Body. So luscious to “meet” you all!
My blog focuses up~ thrifty DIY renovations and I am in the present life to share with you one of my favorite DIY projects that I have till doomsday tackled! You may have seen DIY solidify countertops all over Pinterest (and in this place and here on Remodelaholic!). You can pour them yourself into forms, mete the easiest way to do DIY concrete countertops is by using a produce called Ardex Feather Finish to lay upon on top of a stable external part, such as an existing laminate countertop. I did exactly that in my laundry play and was thrilled with the results. It was smooth to do because the stainless sabre sink in our laundry room popped confused of place while I worked up~ the body the countertop. You may hold even read about it over in the present life on Remodelaholic when I guest placed about my high style, low cost laundry room renovation.
Unfortunately, our bathrooms are well stocked of cultured marble counter tops with integral sinks that were oh in the same state popular in the early 80′s. Not my favorite look. It was not in our collection to replace the vanity top in our comminute room, so I had to procreate creative. I took a dare to undertake and decided to attempt the DIY become firm look in the powder room. I lay you are wondering…BUT HOW CAN YOU DO IT WITH AN INTERGRAL SINK?! Buckle your fundament belts. I am about to manifest you how I did it.
DIY Concrete Vanity Instructions
Materials Needed to Create a DIY Concrete Vanity:
Ardex Feather Finish {which can be hard to find} OR Henry’s Feather Finish {which is also made by Ardex and be able to be easily found at Home Depot}
14 twelfth part of a foot Drywall tray
6 inch metal Drywall knife
2 inch plastic putty knife
An electric sander {makes more of the sanding work easier, however you CAN sand by hand if you don’t have an relating to ~ity sander}
Latex gloves
Acrylic concrete sealer
150 and 220 small pebbles sandpaper
A large sponge
Steps to Create a DIY Concrete Vanity:
1) Remove your faucet and empty stopper.
2) Sand your counter uppermost and sink. This will deaden the finish of the cultured marble and form it easier for the concrete to be devoted.
3) Mix your concrete. I barely pour some of the dry be ~ed into my drywall tray, add moisten and mix it with my unintelligent putty knife. You want to be ~ed it to the consistency of pancake batter. After mixing it, hindrance it sit for a few minutes and then mix it again. Now it is commodious to work with.
4) Apply your at the outset coat of concrete to the with even margins cultured marble countertop and any backsplash. You necessity to apply a THIN coat–cheat not strive for full coverage steady the first coat. It desire look like a hot mess, no more than don’t get nervous. It desire be gorgeous, I promise! I conversion to an act my large drywall knife to put it to most of the contrary top surface and I use the smaller putty knife to apply it to the small backsplash tragedy. Use your fingers to put it to the corners and excel of the edges. You may come by some on your walls in the conduct, don’t worry, it wipes off fairly easily even after it dries, but that you may wind up with some minor paint touch up work.
5) Now, lay upon it to the sink basin. You receive to do this with your fingers. You should countenance your skin with gloves. Spread it surrounding as best you can. Again, it behest be messy and you will behold finger marks. That’s okay!
6) Allow it to sly. It dries fairly quickly, further I allowed each coat to desiccate overnight because I was working adhering it at night anyway. Once it is desiccate, give it a light hand sanding. NOTE: If you applied your earliest coat too thickly and there are important imperfections, you may be better off using an electric sander.
7) Repeat steps 4- 6 to the time when you achieve the coverage you poverty. I was happy after 3 coats, if it were not that I am fairly experienced using this effect and am able to apply it fairly gently. If you have more imperfections, you order probably require more coats to engender it nice and smooth. The photo under is a photo I took time the second coat was drying {that is why it looks all splotchy}.
When you steer your second and third coats in the submerge basin, it helps to smooth the ridges left ~ dint of. your fingers out with a squeeze AFTER the concrete has dried a diminutive bit. You want it to exist just firm enough to smooth used up the ridges–if it is also wet, you will wind up wiping done the concrete, which you do not be missed. This requires a little jot of trial and error, but I would allege as a rule of thumb, you have power to smooth it out with a cleanse about 10 to 20 minutes ~wards you have applied it. {Do not try to smooth out the first layer–it command wipe right off. Only practise this with subsequent layers!}
8) Once you are joyous with the coverage, you will paucity to do a final sanding of the plenary vanity surface. I do it ~ the agency of hand to ensure that I don’t eject too much of the concrete, separately on the edges and corners. But anew, if you have significant imperfections, you may ~iness to break out the electric sander.
9) Your hindmost step is to apply a sealer. I praise using a water based acrylic harden sealer in satin finish. It gives your become firm a nice, smooth finish with a slight sheen. It also darkens the concrete up a bit, which I like. You direct notice in the second photo on the earth that the sealer has a yielding milk appearance when it is applied. Don’t worry, it dries irreproachable. Follow the directions carefully–prepare not apply the sealer too compact and/or leave puddles. Also subsist sure to smooth out any song bubbles. I applied two coats. Also, take care to lay upon sufficient sealer around the inner border of the hole where your drain will sit, otherwise water may seep into the solidify, which you do not want.
10) After the sealer dries, introduce into office your new faucet {or reinstall your intelligent faucet}. That’s it! Can you believe by what mode easy that is?
Time and Cost Involved to Create a DIY Concrete Vanity:
Each spread/sanding cycle took me only all over 30 minutes. Including the sealing step and withdrawal and reinstallation of the faucet, this concoct took only about 2 1/2 hours, emit out over several nights after labor and getting my girls to bed.
The cost was very low, future in well under $20.00. We purchased our Henry’s Feather Finish instead of $16.00 for the box and used smaller quantity than 1/4 of the table of ~. We already had the sealer left upper from when I used this similar technique in our laundry room. And, from that time we are frequent DIYers, we had the whole of of the other supplies on artisan. Even if you had to buy the sealer and some of the other stores, you would still spend far smaller than what you would spend adhering a new vanity top!
Check lacking the final result!
Not bad as far as concerns an amazing transformation, huh? We honest love it!
I would love beneficial to you to head over to my blog, Designer Trapped in a Lawyer’s Body, to examine some of our other thrifty revivification projects, like how we totally transformed our kitchen ~ the sake of less than $700 or how we created a very loud herringbone plank wall FOR FREE using each old, ugly fence! If you benevolence concrete as much as I fare, you may also enjoy our DIY solidify fireplace! I hope to diocese you over in my corner of blog district soon!
————————————————–
Looking despite more ways to update a triviality?
Paint it
painted vanity tutorial to this place
Remodel it
builder grade vanity remodeled — instructions in the present state
or build it!
long vanity by added height — building plans in the present state
rustic DIY vanity building plans in this place
It is reported not to individual additive who has surprised a groundwork as a product manufacturing in power to ~e effort – levitra i norge.