INTRODUCTION
After the introduction of the Esky 150X, probably one of the first cheap brushed flybarless microhelicopter offering a 6-axis stabilization like quadcopters, here is the Esky F150X, the airwolf declinaison. We will find the same ingredients: CC3D board for the 6-axis stabilization, flybarless system, 8mmx20mm main rotor coreless motor & 6mmx15mm tail coreless motor.
BOX CONTENT
+ 1 x Esky F150X (with a 1S 150mAh LiPo with 1.25mm microJST connector)
+ 1 x Transmitter (using 4xAA batteries not included)
+ 1 x USB charger
+ 2 x Spare props
+ 1 x Screwdriver
+ 3 x Spare EM tape
+ 1 x Instruction manual (English/chinese)
OVERVIEW
In term of design, no external change with the former Esky F150: we have a full plastic based struture whithout any carbon element immitating the famous airwolf helicopter. The plastic canopy is very flexible and thin; assembled in two parts. IMHO, the structure will present some cracks in the plastic after hard crash session. The F150X seems less solid than the E150X comparatively. The F150X is also a 180mm machine, so clearly targetting indoors applications.
-FRONT VIEW
Through the transparent Windows, we can guess the two ports. the left one to plug a microJST PH 1.0mm for USB connexion and the right to connect the LiPo.
-SIDE VIEW
The flybar system with two latteral rods
Two latteral screws/clips system to lock the structure and attache the front canopy part hidding the LiPo & FC.
The tail motor is a 6mmx15mm coreless model. No RPM mention.
-REAR VIEW
-UPPER VIEW
-BOTTOM VIEW
As said previously, the canopy is based on two parts assembled centrally and potentially vulnarable after a crash.
Fake wheels are simply glued and will pop off relatively fast after minor crashes.
-WEIGHT
A little bit more than 30g without probably.
35.1g with the battery installed.
Motors & props
The main rotor motor is 8mmx20mm model while the two servos are 4mm.
LiPo
A simple 1S 150mAh LiPo with 1.25microJST connector. No discharge rate mentioned but the battery is strong enough to provide 4min30-5min of flight time.
Disassembling
The green light blinks fast during the binding procedure and as soon as the link is solid, the blue light become solid. Mid-flight, both lights are blinking slowly.
The left shows a 1.25mm microJST port where you will have to connect the battery
On the right side of the CC3D board, a 4 pins port for USB connexion
According to OiOi’s posts for the E150X:
https://www.rcgroups.com/forums/showpost.php?p=36336424&postcount=239
https://www.rcgroups.com/forums/showpost.php?p=36349425&postcount=242
we have the following pinout for the microUSB port. Plug it by disconnecting first the LiPo.
Transmitter
The same basic radio chassis as for the 150, 150X, F150. The left shoulder selects beginner & Advanced rates.
The right yaw trims engages the binding procedure if your need to relunch the procedure or bind the F150X with a former ESKY radio.
Important, you will need first to arm the machine (lower-right position for mode 2) to take off.
4xAA batteries are required. Ni-Mh are working.
Good news, the Esky150 protocol in deviationTX have been recently fixed and now no problem to bind the machine.
UNBOXING, ANALYSIS AND DEMO FLIGHT
It’s clear thanks to the the 6 axis stabilisation fly a flybarless machine is super easy… and very smooth. Controls are precize and you can even fly in super tiny spaces. In the other hand, I am not impressed by the power lift of the machine, the ascent rate is slow .and generally the F150X is not a super fast helicopter. More the machine can handle only a moderate Wind. No miracle with a 35g machine. Flight times are good for a 150mah model, between 4min30 and 5min in practice.
CONCLUSIONS
The Esky F150X represents a good indoors microheli wel adapted for beginners with its stability largely improved via the 6-axis stablization.
Be aware, the full plastic structure don’t represent a sign of durability and the machine can’t really flight even a moderate breeze.
PROS
+ Super stable flybarless machine
+ Precize controls
+ Indoors flyer
+ 4min30 of flight time
+ CC3D FC
+ DeviationTX compatible
CONS
– Not wind resistant
– Poor ascent rate
– Fragile plastic structure
This helicopter have been courtesy provided by Banggood in order to make a fair and not biased review. I would like to thank them for this attitude.
You can find it actually for 52USD at http://www.banggood.com/ESKY-F150X-2_4G-4CH-MINI-6-Axis-Gyro-Flybarless-RC-Helicopter-With-CC3D-p-1122794.html
Cet article TEST: Esky F150X (180mm Helicopter, CC3D, 35.5g) est apparu en premier sur Drone-Maniac !!!!!!!.