HiSilicon Hi3518 ARM9 processor is mostly being used in IP cameras, but Hicat startup decided to combined the camera processor with an Atmel MCU and a MT7601 WiFi module to create a wireless camera board to be used with OpenCV, and even provide a complete affordable robot kit with the board.
Hicat.livera board specifications:
Vision Core – Hisilicon Hi3518 ARM9 processor @ 440 MHz
Storage – 16MB flash + micro SD card
MCU – Atmel ATmega32U4 AVR micro-controller
Connectivity – 802.11 b/g/n WiFi via Mediatek MT7601 module + u.FL antenna connector
Camera interface with provided 140 deg. camera using Omnivision OV9712 720p (1280×720) sensor
USB – 1x micro USB port for power and programming
Audio – Built-in microphone, speaker header
Sensors – MPU6050 accelerometer and gyro
Expansion – 2x GPIO headers with GPIOs, I2C, SPI, serial, PWM, digital, analog and power signals.
Misc – MCU reset and Linux reset buttons,
Power Supply – 5V via USB or 3.3V LiPo battery
Dimensions – 60 x 42 mm
They’ve also provide a comparison table between HICAT.Livera and two competing platforms, namely openMV and PIXY.
The firmware in the Hisilicon chip is based on Linux, and includes a video and file streaming server, OpenCV support for object tracking, Node.js support. The ARM9 processor and Atmel MCU communicate over a serial port, and an Arduino library is provided. An Android app (iOS coming soon) can also be used to view the live stream, control the robot, and change settings. Some code is available on Github, but not Linux, which may be an issue to due Hisilicon strict NDA requirements. The developer also claims the project will be open source hardware.
Beside Livera kit with the board and camera, a robot kit is also offered with a extension cable for the camera, a motor driver board based on lv8548 H-Bridge, two DC motors, a servo motor, wheels and body, 9V rechargeable battery, and laser beam. The board and robot are demonstrated in the embedded video.
The project has just launched via Kickstarter, where the goal is to raise $5000 ore more to fund mass production. They have not mentioned the manufacturing partner in Kickstarter, but it should be Seeed Studio, since they informed me about the project. Livera board with camera requires a $39 pledge (Early bird), while the complete robot kit is just $69 (Early Bird). Shipping adds $2 to $20 depending on rewards and destination, and delivery is scheduled for (end of) December 2016 or January 2017.
Tweet HiSilicon Hi3518 ARM9 processor is mostly being used in IP cameras, but Hicat startup decided to combined the camera processor with an Atmel MCU and a MT7601 WiFi module…