Just wanted to share my cs chassis build since i finally got the cs to work perfectly :biggrin:
(*updated info* )
Chassis introduction:
RC Drift Chassis Information
Manufacturer: Tamiya/Eagle Racing
Model: TT01
Track Surface: Asphalt/carpet
Tires: Raikou d70/dxpe/abs smooth
Motor and ESC: Hobbywing &Turnigy 12t/brushless 35A ESC
Servo: BlueBird digital 661mg+hs/ht
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):-4
Toe (Degrees) (Specify Toe in or out):1 out
Caster angle (Degrees): 4-6 *16*
Kick-up (mm): n/a
Sway Bar (yes/no): no
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): square tt01 drift spring soft/MST DK hard
Damper Oil (indicate weight or #): 350wt
Upper Damper Position (Lower # indicates inner most position): 1
Lower Damper Position (Lower # indicates inner most position): 1
Other (Weights, Mods, etc): 24g bumper weight/*r31 suspension conversion*
Rear Setup
Camber (Degrees) (Positive is out, Negative is in):-1
Toe (Degrees) (Specify Toe in or out):2-in
Caster (Degrees): o
Kick-up (mm): n/a
Sway Bar (yes/no): o
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): square tt01 drift soft/mst DK medium 30mm
Damper Oil (indicate weight or #): 220
Upper Damper Position (Lower # indicates inner most position): 2
Lower Damper Position (Lower # indicates inner most position): 2
Other (Weights, Mods, etc): R31 suspension
Drivetrain
Front Belt (mm or teeth): N/a Shaftie
Rear Belt (mm or teeth): n/a
Front Pulley (teeth and differential type): front one way (reverse)
Front Center Pulley (teeth and differential type): bevel gear 13 t from traxxas
Rear Center Pulley (teeth and differential type): active hobby (A.H.)cs gear 1.44 solid spool 32t
Rear Pulley (teeth and differential type): A.H. bevel cs gear 20t
Gearing
Spur (teeth and pitch): (67t /.06M) (tamiya df02 spur gear)
Pinion (teeth and pitch): (21t/.06M) (robinson racing)
other:
modded steering rack
modded damper rebound
5000 mah lipo
futaba 3pm-x tx/ r603ff rx
turnigy 35A brushless
TRF Dampers
currently c.s. @1.67, but 1.97 C.S. is possible. (also have active hobby 1.5 cs gear ver.2 bnip. But the old version 1 countersteer gears have held up for almost 2 years now.
old steering and suspension
old angle
new angle
new front suspension and steering setup
new rear suspension setup
This tt01 has been my main drift machine since 2009. its been modded to the max and no longer has any stock tamiya parts (some hop-ups remain)
many will say that i spent too much on modding this chassis but to me its better to max out what you got and work on your skills. For me its much more rewarding to keep up with vdf's and r31s with an underapreciate tt01.
thanks for looking. updates and pics coming soon once i finish overhauling with new r31 suspension.
comments welcome
EDIT:
heres video footage of her first run since the suspension install.
object
I still need a lot more practice and tuning...
Statistics: Posted by rudeboy03 - Wed Jan 23, 2013 8:59 pm - Replies 0 - Views 27