Micro Focus® Community SM Terms of Use Micro Focus International plc and its subsidiaries ("Micro Focus") makes available information, materials, and products on the Micro Focus Community web site (hereinafter, the “Site”) subject to the following terms and conditions. By accessing the Site, you agree to the terms and conditions as set forth in these Terms of Use. Micro Focus reserves the right to change these terms and conditions from time to time at its sole discretion and without notice. Copyright and Site Content The information, documents, and materials available on the Site are protected by copyright, and all materials are Copyright © 2001-2011 Micro Focus. All Rights Reserved. Except as specifically permitted herein, no portion of the information on the Site may be reproduced in any form or by any means without prior written permission from Micro Focus. The Site may contain both official Micro Focus information and materials as well as materials prepared by unaffiliated third parties. Any information or materials posted by individuals not affiliated with Micro Focus shall be solely attributable to their author and shall not represent the views or opinions of Micro Focus. You agree that your use of the Site to communicate your opinions, ideas, and information, including but not limited to the Site Library, Blogs, Forums, and News and Events pages, as applicable, shall be consistent with the nature and purpose of the Site, and shall not be used to defame, harass, abuse, or threaten other users; advertise goods or services unless authorized or permitted by Micro Focus; upload or make available materials which would infringe upon the intellectual property rights of another; violate the laws of any country; or otherwise engage in conduct deemed unprofessional, improper, or inconsistent with the purpose of the Site as determined by Micro Focus in its sole and absolute discretion. The Site shall be monitored and moderated by Micro Focus and/or authorized third parties, and failure to fully comply with these Terms of Use may result in a limitation or termination of your access to the Site. Use of Software The software and accompanying documentation that are made available for download from the Site, if any, are the copyrighted work of Micro Focus and/or its suppliers. Use of the software is governed by the terms of the applicable end user license agreement which accompanies or is included with such software. You will not be able to download or install any software that is accompanied by or includes an end user license agreement unless you agree to the terms of such end user license agreement. If you do not agree to these terms, you are not authorized to use the software. Links to Third-Party Web Sites The Site may contain links to third-party Web sites, which are not under the control of Micro Focus. Micro Focus makes no representations or warranties whatsoever about any other Web site to which you may have access through the Site. When you access a non-Micro Focus Web site, you do so at your own risk and Micro Focus is not responsible for the accuracy or reliability of any information, data, opinions, advice or statements made on these sites. Micro Focus expressly disclaims any potential liability associated with any such information and such information is not incorporated by reference into the Site. Micro Focus provides third party links merely as a convenience and the inclusion of such links does not imply that Micro Focus or its management endorses or accepts any responsibility for the content or uses of such Web sites. By clicking on any of the hyperlinks to third-party Web sites on the Site, you acknowledge and agree to the foregoing limitations. Use of Site Information Except as otherwise indicated elsewhere on this site, you may view, copy, print and distribute documents available on the Site subject to the following conditions: The document may be used solely for personal, informational, non-commercial purposes; The document may not be modified or altered in any way; Any copy of the document or portion thereof must include the copyright notice above and this permission notice; and Micro Focus reserves the right to revoke such authorization at any time, and any such use shall be discontinued immediately upon written notice from Micro Focus. All other rights, title and interest not expressly granted are reserved. Use for any other purpose is expressly prohibited by law. Documents specified above do not include the design or layout of the Site or any portion thereof. Elements of the Site are protected by copyright, trademark, trade dress, and other laws, and may not be copied or imitated in whole or in part. Warranties and Disclaimers EXCEPT AS EXPRESSLY PROVIDED OTHERWISE IN AN AGREEMENT BETWEEN YOU AND MICRO FOCUS, ALL INFORMATION AND SOFTWARE ON THE SITE ARE PROVIDED "AS IS" WITHOUT ANY OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABLE QUALITY, SATISFACTORY QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE, OR COURSE OF DEALING. MICRO FOCUS ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS IN THE INFORMATION OR SOFTWARE OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR LINKED TO THE SITE. REFERENCES TO CORPORATIONS, THEIR SERVICES AND PRODUCTS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. IN NO EVENT SHALL MICRO FOCUS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS INFORMATION. SOME STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE SITE COULD INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION CONTAINED IN THE SITE, AND THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE SITE. MICRO FOCUS MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED ON THE SITE AT ANY TIME. The Site can be accessed from other countries around the world and may contain references to Micro Focus products, services and programs that have not been announced in your country. These references do not imply that Micro Focus intends to announce such products, services or programs in your country. Forward Looking Statements Disclaimer Certain statements contained on the Site may now, or hereafter from time to time, constitute “forward-looking statements”. All statements other than statements of historical facts included on the Site, including, without limitation, those regarding Micro Focus’ financial condition, business strategy, plans and objectives, are forward-looking statements. These forward-looking statements can be identified by the use of forward-looking terminology, including the terms “believes”, “estimates”, “anticipates”, “expects”, “intends”, “may”, “will” or “should” or, in each case, their negative or other variations or comparable terminology. Such forward-looking statements involve known and unknown risks, uncertainties and other factors, which may cause the actual results, performance or achievements of Micro Focus, or industry results, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such forward-looking statements are based on numerous assumptions regarding Micro Focus’ present and future business strategies and the environment in which it will operate in the future. Such risks, uncertainties and other factors include, among others: the level of expenditure committed to development and deployment applications by information technology organizations; the degree to which information technology organizations adopt web enabled services; the rate at which large organizations migrate applications from the main frame environment; the continued use and necessity of the main frame for business critical applications; the degree of competition faced by Micro Focus; growth in the information technology services market, general economic and business conditions, particularly in the United Kingdom, changes in technology, competition and ability to attract and retain personnel. Except as required by law, Micro Focus does not undertake any obligation to update or revise publicly any forward-looking statement, whether as a result of new information, future events or otherwise. Micro Focus expressly disclaims any obligation or undertaking to release publicly any updates or revisions to any forward-looking statement contained herein to reflect any change in the its expectations with regard thereto or any change in events, conditions or circumstances on which any such statement is based. Feedback; Confidential Information; Privacy Unless otherwise explicitly stated herein, any non-personal information or material sent to Micro Focus will be deemed NOT to be confidential. By sending Micro Focus any non-personal information or material, whether via email, on a forum, or through any other means, you grant to Micro Focus an unrestricted, irrevocable license to use, reproduce, display, perform, modify, transmit and distribute those materials or information, and you also agree that Micro Focus is free to use any ideas, concepts, know-how or techniques that you send us for any purpose. Notwithstanding the foregoing, Micro Focus will not use or release your name or otherwise publicize the fact that you submitted materials or other information to us unless: (a) you grant us permission to do so; (b) we first notify you that the materials or other information you submit to a particular part of the Site will be published or otherwise used with your name on it; or (c) we are required to do so by law. Please see the Site’s Privacy Statement for additional information regarding information privacy and the collection and use of personal information. Export Control Laws; U.S. Government Rights Software available on or through the Site is subject to United States export controls. No software available from the Site may be downloaded or otherwise exported or re-exported: (1) into (or to a national or resident of) Cuba, Iraq, Libya, Sudan, North Korea, Iran, Syria, or any other country to which the United States has embargoed goods; or (2) to anyone on the U.S. Treasury Department's list of Specially Designated Nationals or the U.S. Commerce Department's Table of Denial Orders. By downloading or using software from the Site, you are agreeing to the foregoing and you are warranting that you are not located in, under the control of, or a national or resident of any such country or on any such list. You may not access, download, use or export the information, software, products or services contained on the Site in violation of U.S. export laws or regulations, or in violation of any applicable local laws or regulations. With respect to any acquisition of any product or publication (together referred to as "Product") by or for any unit or agency of the United States Government (the "Government"), the Product shall be classified as "commercial computer software", as that term is defined in the applicable provisions of the Federal Acquisition Regulation (the "FAR") and supplements thereto, including the Department of Defense (DoD) FAR Supplement (the "DFARS"). The Product was developed entirely at private expense, and no part of the Product was first produced in the performance of a Government contract. If the Product is supplied for use by the DoD, the Product is delivered subject to the terms of this Agreement and either (i) in accordance with DFARS 227.7202-1(a) and 227.7202-3(a), or (ii) with restricted rights in accordance with DFARS 252-227-7013 begin_of_the_skype_highlighting 252-227-7013 end_of_the_skype_highlighting (c)(1)(ii)(OCT 1988), as applicable. If the Product is supplied for use by a Federal agency other than the DoD, the Product is restricted computer software delivered subject to the terms of this Agreement and (i) FAR 12.212(a); (ii) FAR 52.227-19; or (iii) FAR 52.227-14(ALT III), as applicable. The contractor/manufacturer is MICRO FOCUS, One Irvington Centre, 700 King Farm Boulevard, Suite 400, Rockville, MD 20850-5736. Governing Law; Jurisdiction The Site (excluding linked sites) is controlled by Micro Focus from its offices within the United Kingdom. By accessing the Site, you and Micro Focus agree that all matters relating to your access to, or use of, the Site shall be governed by the laws of England and Wales, without regard to the conflicts of laws principles thereof. You and Micro Focus also agree and hereby submit to the exclusive jurisdiction of the English courts with respect to such matters. Micro Focus makes no representation that materials on the Site are appropriate or available for use in other locations, and accessing them from territories where their contents are illegal is prohibited. Those who choose to access the Site from other locations do so on their own initiative and are responsible for compliance with local laws. Trademark Information The trademarks, logos and service marks ("Marks") displayed on the Site are the property of Micro Focus or other third parties. You are not permitted to use the Marks without the prior written consent of Micro Focus or such third party which may own the Marks. "Micro Focus" and the Micro Focus logo are trademarks of Micro Focus (IP) Limited.