Navigation
Preparation
Delivery Controller 7.6 LTSR CU1 Upgrade
Delivery Controller 7.6 LTSR CU1 New Install
Create Site
Second Controller
Other 7.6 LTSR CU1 Updates
Studio – Slow Launch
Database Maintenance:
split databases, change db connect strings, read-committed snapshot, Director grooming, etc.
Studio Administrators
vCenter Connection
Citrix Director
Director on Standalone Server
Director Tweaks
Director – Multiple XenDesktop Sites
Director – Saved Filters
Director – Custom and Scheduled Reports
Citrix Licensing Server
Upgrade Licensing Server and Enable CEIP
Licensing Server High Availability using GSLB
Citrix License Server Monitoring
Remote Desktop Licensing Server
Install Remote Desktop Licensing Server
Active Remote Desktop Licensing Server
Health Check
Preparation
Citrix Licensing – If you are going to use an existing Citrix Licensing Server, upgrade it to 11.13.1.2 build 16002.
SQL Databases
Citrix blog post Database Sizing Tool for XenDesktop 7 and Bugfix for Database Sizing Tool
Citrix article CTX114501 – Supported Databases for Citrix Products
There are typically three databases: one for the Site (aka farm), one for Logging (audit log) and one for Monitoring (Director).
The monitoring database name must not have any spaces in it. See CTX200325 Database Naming Limitation when Citrix Director Accesses Monitoring Data Using OData APIs
If you want Citrix Studio to create the SQL databases automatically, then the person running Studio must be a sysadmin on the SQL instances. No lesser role will work.
As an alternative, you can use Citrix Studio to create SQL scripts and then run those scripts on the SQL server. In that case you only need the dbcreator and securityadmin roles.
It is possible to create the databases in advance. However, you must use the non-default Latin1_General_100_CI_AS_KS collation. Then use Citrix Studio to configure the database tables.
Citrix recommends SQL Mirroring because it has the fastest failover.
SQL Mirroring requires two SQL Standard Edition servers and one SQL Express for the witness server.
You can setup SQL Mirroring either before installing XenDesktop or after installing XenDesktop. If after, then see Citrix CTX140319 to manually change XenDesktop’s database connection strings How to Migrate XenDesktop Database to New SQL Server.
To setup SQL Mirroring, see Rob Cartwright: Configure SQL Mirroring For Use With XenDesktop, XenApp, and PVS Databases.
If you try to stretch the mirror across datacenters, the SQL witness must be placed in a third datacenter that has connectivity to the other two datacenters. However, stretching a single XenApp/XenDesktop site/farm and corresponding SQL mirror across datacenters is not recommended.
AlwaysOn Availability Groups and SQL Clustering are also supported. However, these features require the much more expensive SQL Enterprise Edition.
Windows Features
Installing Group Policy Management on the Delivery Controller lets you edit GPOs and have access to the Citrix Policies node in the GPO Editor. Or you can install Studio on a different machine that has GPMC installed.
vSphere Web Client – if you will connect to vSphere Web Client from the Controller machine, Flash Player is only available for IE if you install the Desktop Experience feature. Or you can use Google Chrome.
vSphere
Create a role in vSphere Client. Assign a service account to the role at the Datacenter or higher level.
If the vCenter certificates are not trusted, import the vCenter server certificate into the Trusted People store of the Delivery Controller.
Delivery Controller – Upgrade to 7.6.1000
Media – The latest update for 7.6 is LTSR Cumulative Update 1, which is also known as 7.6.1000. You can do a fresh, full install of 7.6.1000 or you can upgrade 7.6.0 to 7.6.1000. Download 7.6 LTSR CU1 (7.6.1000) from XenDesktop Platinum, XenDesktop Enterprise, XenApp Platinum, or XenApp Enterprise, depending on your license.
LTSR compliance – To remain compliant with LTSR (5 years of support), you must install the exact versions detailed at Citrix Docs. If you upgrade a single component beyond LTSR, then you must upgrade all components to the latest release. Citrix LTSR Assistant can determine your LTSR compliance.
DBA – During the upgrade of Delivery Controller, you will be prompted to upgrade the database. Schedule a DBA to assist.
On one of your existing Controllers, run AutoSelect.exe from the XenApp/XenDesktop 7.6 LTSR CU1 (7.6.1000) media.
Click Studio and Server Components to begin the upgrade.
In the Software License Agreement page, select I have read, understand, and accept the terms and click Next.
In the Ensure Successful Upgrade page, check the box next to I’m ready to continue and click Next.
In the Firewall page, click Next.
In the Summary page, click Upgrade.
When Studio launches, you will be prompted to upgrade the database. If you have sysadmin permissions on SQL, then you can click Start the automatic Site upgrade. If you don’t have sysadmin permissions, then you need to click Manually upgrade this site, generate SQL scripts, and get a DBA to run the SQL scripts.
Once the database is upgraded, you can then upgrade the remaining Delivery Controllers.
Delivery Controller 7.6.1000 – New Install
Sizing – A typical size for the Controller VMs is 2-4 vCPU and 8 GB of RAM.
Media – The latest update for 7.6 is LTSR Cumulative Update 1, which is also known as 7.6.1000. You can do a fresh, full install of 7.6.1000, or you can upgrade 7.6.0 to 7.6.1000. Download 7.6 LTSR CU1 (7.6.1000) from XenDesktop Platinum, XenDesktop Enterprise, XenApp Platinum, or XenApp Enterprise, depending on your license.
LTSR compliance – To remain compliant with LTSR (5 years of support), you must install the exact versions detailed at Citrix Docs. If you upgrade a single component beyond LTSR, then you must upgrade all components to the latest release. Citrix LTSR Assistant can determine your LTSR compliance.
On two Controllers, install the Delivery Controller software from the XenApp/XenDesktop 7.6 LTSR CU1 media. Go to the downloaded XenDesktop 7.6.1000 ISO and run AutoSelect.exe.
Click Start next to either XenApp or XenDesktop. The only difference is the product name displayed in the installation wizard.
On the left, click Delivery Controller.
In the License Agreement page, select I have read, understand, and accept the terms and click Next.
In the Core Components page, you can leave everything checked to install all components on one server. Or you can install different components on different servers. StoreFront, Director, and Licensing are typically installed on separate servers so they can more easily support multiple sites/farms.
In the Features page, uncheck the box next to Install Microsoft SQL Server 2012 SP1 Express and click Next.
In the Firewall page, click Next.
In the Summary page, click Install.
In the Installation Successful page, click Finish. Studio will automatically launch.
Ensure the two Controller VMs do not run on the same hypervisor host. Create an anti-affinity rule.
Create Site – Create Databases
There are several methods of creating the databases for XenApp/XenDesktop:
If you have sysadmin permissions to SQL, let Citrix Studio create the databases automatically.
If you don’t have sysadmin permissions to SQL then do one of the following:
Use Citrix Studio to generate SQL scripts and send them to a DBA.
Use PowerShell to generate SQL scripts and send them to a DBA.
Database Mirroring
If you are not using database mirroring then skip to the next section.
You can setup SQL Mirroring either before configuring XenDesktop or after configuring XenDesktop.
If before, then the empty databases (Site, Logging, Monitoring) must use the Latin1_General_100_CI_AS_KS collation, which is not the default.
If SQL Mirroring is already setup then XenDesktop will detect it and set the database connection strings accordingly. Or you can manually change the database connection strings later as detailed at Citrix CTX140319 How to Migrate XenDesktop Database to New SQL Server.
If you use Citrix Studio to create SQL scripts that populate the databases, then there will be separate SQL scripts for the Primary and Partner.
To verify mirroring after the XenDesktop configuration has completed, run the PowerShell cmdlet get-configdbconnection and ensure that the Failover Partner has been set in the connection string to the mirror.
Use PowerShell to Create SQL Scripts
From Sinisa Sokolic XenDesktop 7.x DB creation with locked SQL Servers: Citrix Studio 7.6 only creates one SQL Script at a time. In a typical two-Controller configuration, that means you need 4 SQL scripts: one for each Controller, one for Monitoring, and one for Logging. That’s four round trips between you and the DBA. You can instead use PowerShell Commands to generate three of the SQL scripts now rather that doing one at a time:
Use Studio to Create the Database
Or use Citrix Studio to create the SQL Scripts:
Launch Citrix Studio. After it loads, click Deliver applications and desktops to your users.
In the Introduction page, select An empty, unconfigured site. This reduces the number of pages in the Setup wizard. The other Steup Wizard pages will be configured later.
Enter a Site Name (aka farm name) and click Next. Only administrators see the farm name.
In the Database page, enter the name of the SQL server where the database will be created. Enter a name for the new Database. No spaces in the database name.
If the person running Studio is a sysadmin on the SQL server then you can click Test Connection and click Yes when asked to automatically create the database.
If you are not a sysadmin, then click Generate database script.
A folder will open with two scripts. The top script needs to be sent to a DBA.
On the Principal SQL Server, open the query (Script_For_Database…sql).
At the top of the script, is a commented line that creates the database. Either uncomment it or copy it to a second query window and execute it. Or in the case of mirroring, the database is already created so there’s no need to create the database again.
Open the Query menu and click SQLCMD Mode.
Then execute the rest of the script.
If SQLCMD mode was enabled properly then the output should look something like this:
If you have a mirrored database, run the second script on the mirror SQL instance. Make sure SQLCMD mode is enabled.
The person running Citrix Studio must be added to the SQL Server as a SQL Login and granted the public server role.
Back in Citrix Studio, click the Test connection button.
Click Close once the tests have passed. Then click Next.
On the Licensing page, enter the name of the Citrix License Server and click Connect.
If the Certificate Authentication appears, select Connect me and click Confirm.
Then select your license and click Next.
In the Summary page, make your selection for Customer Experience Improvement Program and click Finish.
Verify Database Mirroring
If your database is mirrored, when you run get-brokerdbconnection, you’ll see the Failover Partner in the database connection string.
Second Controller
There are several methods of adding a second Controller to the databases for XenApp/XenDesktop:
If you have sysadmin permissions to SQL, let Citrix Studio modify the databases automatically.
If you don’t have sysadmin permissions to SQL then do one of the following:
Use Citrix Studio to generate SQL scripts and send them to a DBA.
Use PowerShell to generate SQL scripts and send them to a DBA.
From Sinisa Sokolic XenDesktop 7.x DB creation with locked SQL Servers: The PowerShell Commands to generate the SQL scripts that add a Controller to the databases are shown below:
Or use Citrix Studio to create the SQL Scripts:
On the 1st Delivery Controller, if desired, delete the default StoreFront store (/Citrix/Store) and recreate it with your desired Store name (e.g. /Citrix/CompanyStore).
On the 2nd Delivery Controller, install XenDesktop as detailed earlier.
After running Studio, click Connect this Delivery Controller to an existing Site.
Enter the name of the first Delivery Controller and click OK.
If you don’t have elevated SQL permissions, click No when asked if you want to update the database automatically.
Click Generate scripts.
A folder will open with two scripts. The top script needs to be sent to a DBA.
On the SQL Server, open the query (Script_For_Database…sql).
Open the Query menu and click SQLCMD Mode.
Then execute the XenDesktop script.
If SQLCMD mode was enabled properly then the output should look something like this:
Back in Citrix Studio, click OK.
In the Studio, under Configuration > Controllers, you should see both controllers.
You can also test the site again if desired.
Other LTSR CU1 Updates
The components installed on the 7.6.1000 Delivery Controllers should already be at their .1000 version.
If Citrix Studio 7.6 is installed on separate machines, upgrade it to 7.6.1000. You can run the installer from the 7.6.1000 ISO’s AutoSelect.exe program.
If StoreFront 3.0 is installed on separate servers, upgrade it to 3.0.1000. You can run the installer from the 7.6.1000 ISO’s AutoSelect.exe program or from the 7.6.1000 ISO under \x64\StoreFront.
If Director 7.6 is installed on separate servers, upgrade it to 7.6.1000. You can run the installer from the 7.6.1000 ISO’s AutoSelect.exe program or from the 7.6.1000 ISO under \x64\DesktopDirector.
After upgrading Director, run the following command from an elevated command prompt:
Also upgrade Citrix Group Policy Management on the Director server to 2.5.1000 (aka 7.6.1000). Find CitrixGroupPolicyManagement_x64.msi on the 7.6.1000 ISO under \x64\Citrix Policy
Other upgradeable components on the 7.6.1000 ISO include:
Virtual Delivery Agent 7.6.1000 – Upgrade this on all master images and all persistent machines.
Citrix Print Management 5.4 – this is included in the VDA upgrade
Citrix Group Policy Management 2.5.1000 – Upgrade this on any Microsoft Group Policy Management machine that is used to manage Citrix Policies in Microsoft GPOs.
Universal Print Server 7.6.1000 – Upgrade this on any Print Server that has Citrix Universal Print Server installed.
Citrix License Server 11.13.1
Other upgradeable components on separate ISOs include the following. Download them from XenDesktop Platinum, XenDesktop Enterprise, XenApp Platinum, or XenApp Enterprise, depending on your license.
Citrix Provisioning Services 7.6.2
Citrix Session Recording 7.6.1000
Citrix AppDNA 7.6.5
Receivers and Receiver components are not included in LTSR benefits so they must be the latest versions. See Citrix Docs for the minimum Receiver versions.
Studio – Slow Launch
From B.J.M. Groenhout at Citrix Discussions: The following adjustments can be made if Desktop Studio (and other Citrix management Consoles) will start slowly:
Within Internet Explorer, go to Tools – Internet Options – Tab Advanced – Section Security and uncheck the option Check for publisher’s certificate revocation
After adjustment Desktop Studio (MMC) will be started immediately. Without adjustment it may take some time before Desktop Studio (MMC) is started.
Registry setting (can be deployed using Group Policy Preferences):
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing
“State“=dword:00023e00
Database Maintenance
Split the Databases
Once the site is configured, split the Monitoring and Log data into separate databases.
In Citrix Studio, on the left click the Configuration node.
In the middle, click the Monitoring datastore to highlight it. On the right, click Change Database.
Repeat for the Logging datastore.
View Logging Database
To view the contents of the Logging Database, in Studio, click the Logging node. On the right is Create Custom Report. See Citrix article CTX138132 Viewing Configuration Logging Data Not Shown for more info.
Enable Read-Committed Snapshot
The XenDesktop Database can become heavily utilized under load in a large environment. Therefore Citrix recommends enabling the Read_Committed_Snapshot option on the XenDesktop databases to remove contention on the database from read queries. This can improve the interactivity of Studio and Director. It should be noted that this option may increase the load on the tempdb files. See Citrix article CTX137161 How to Enable Read-Committed Snapshot in XenDesktop for configuration instructions.
Change Database Connection Strings
Sometimes the database connection strings need to be modified:
When moving the SQL databases to a different SQL server
When enabling mirroring after the databases have already been configured in Studio.
Citrix blog post Updating Database Connection Strings in XenDesktop 7.x has PowerShell scripts to update the database connection strings.
Director Grooming
If XenDesktop is not Platinum Edition then all historical Director data is groomed at 7 days.
For XenDesktop/XenApp Platinum Edition, by default, most of the historical Director data is groomed at 90 days. This can be adjusted up to 367 days by running a PowerShell applet.
On a Delivery Controller, run PowerShell and run asnp Citrix.*
Run Get-MonitorConfiguration to see the current grooming settings.
Run Set-MonitorConfiguration to change the grooming settings.
Studio Administrators
Full Administrators
In the Studio, under Configuration, click the Administrators node. The first time you access the node you’ll see a Welcome page. Feel free to check the box and then click Close.
On the Administrators tab, right-click and click Create Administrator.
In the Administrator and Scope page, specify a group (e.g. Citrix Admins or Help Desk) that will have permissions to Studio and Director. Click Next.
On the Role page, select a role and then click Next. For example:
Full Administrator for the Citrix Admins group
Help Desk Administrator for the Help Desk group
Machine Catalog Administrator for the desktop team
In the Summary page, click Finish.
Help Desk
In the Studio, under Configuration, click the Administrators node. On the Administrators tab, right-click and click Create Administrator.
In the Administrator and Scope page, specify a Help Desk group that will have permissions to Studio and Director. Click Next.
On the Role page, select the Help Desk Administrator role and then click Next.
In the Summary page, click Finish.
When administrators in the Help Desk role log into Director, all they see is this.
To jazz it up a little, add the Help Desk group to the read-only role.
Right-click the Help Desk Administrator and click Edit Administrator.
Click Add.
In the Scope page, select a scope and click Next.
In the Role page, select Read Only Administrator and click Next.
In the Summary page, click Finish.
Then click OK. Now Director will display the dashboard.
Provisioning Services w/Personal vDisk
From Citrix docs.citrix.com: The Provisioning Services Soap Service account must be added to the Administrator node of Studio and must have the Machine Administrator or higher role. This ensures that the PvD desktops are put into the Preparing state when the Provisioning Services (PVS) vDisk is promoted to production.
vCenter Connection
XenDesktop uses an Active Directory service account to log into vCenter. This account needs specific permissions in vCenter. To facilitate assigning these permissions, create a new vCenter role and assign it to the XenDesktop service account. The permissions should be applied at the datacenter or higher level.
Import vCenter Certificate
If you replaced the certificates on your vCenter server, then skip this section.
If vCenter is using a self-signed certificate, in order for Delivery Controller to trust the vCenter certificate, you must import the vCenter certificate on both Delivery Controllers.
On each Delivery Controller, run mmc.exe. Open the File menu and click Add/Remove Snap-in.
Move the Certificates snap-in to the right by highlighting it and clicking Add.
Select Computer account and click Next.
Select Local computer and click Finish.
Click OK.
After adding the snap-in, right-click the Trusted People node, expand All Tasks and click Import.
In the Welcome to the Certificate Import Wizard page, click Next.
In the File to Import page, browse to \\vcenter01\c$\ProgramData\VMware\VMware VirtualCenter\SSL and select crt. Click Next.
In the Certificate Store page, click Next.
In the Completing the Certificate Import Wizard page, click Finish.
Click OK to acknowledge that the import was successful.
Repeat these steps on the second Controller. It is important that you do both Controllers before adding the vCenter connection.
Hosting Resources
A Hosting Resource = vCenter + Cluster (Resource Pool) + Storage + Network. When you create a machine catalog, you select a previously defined Hosting Resource and the Cluster, Storage, and Network defined in the Hosting Resource object are automatically selected. If you need some desktops on a different Cluster+Storage+Network then you’ll need to define more Hosting Resources in Studio.
In Studio, expand Configuration and click Hosting. Right-click it and click Add Connection and Resources.
In the Connection page, select VMware vSphere as the Host type.
Enter https://vcenter01.corp.local/sdk as the vCenter URL. The URL must contain the FQDN of the vCenter server. If the vCenter certificate is self-signed, ensure it is added to the Trusted People certificate store on all Delivery Controllers. Ensure the entered URL has /sdk on the end.
Enter credentials of a service account. Click Next.
Enter a name for the hosting resource. Since each hosting resource is a combination of vCenter, Cluster, Network, and Datastore, include those names in this field (e.g. vCenter01-Cluster01-Network01-Datastore01).
In the Cluster page, click Browse and select a cluster or resource pool.
Select a network and click Next.
On the Storage page, select a datastore for the virtual machines.
If desired, change the selection for personal vDisk to use a different storage. Click Next.
In the Summary page, click Finish.
Citrix Director 7.6.1000
Director on Standalone Server
If you are installing Director 7.6.1000 on a standalone server, see Citrix CTX142260 Installing or Upgrading to Citrix Director 7.6.200
If you intend to install Director on a standalone server, start with running AutoSelect.exe from the XenApp/XenDesktop 7.6.1000 media.
On the right, click Citrix Director.
It will ask you for the location of one Controller in the farm. Then finish the installation wizard.
If you upgraded an existing Director installation the upgrade, run the following command from an elevated command prompt:
Also install Citrix Group Policy Management 2.5.1000 (aka 7.6.1000) on the Director server. Find CitrixGroupPolicyManagement_x64.msi on the 7.6.1000 ISO under \x64\Citrix Policy
Director Tweaks
Prepopulate the domain field
From http://www.xenblog.dk/?p=33: On the Controllers having the Director role installed, locate and edit the ‘LogOn.aspx’ file. By default you can find it at “C:\inetpub\wwwroot\Director\Logon.aspx”
In line 328 or line 358 you will have the following. To find the line, search for ID=”Domain”. Note: onblur and onfocus attributes were added in newer versions of Director.
<asp:TextBox ID="Domain" runat="server" CssClass="text-box" onfocus="showIndicator(this);" onblur="hideIndicator(this);"></asp:TextBox>
In the ID=”Domain” element, insert a Text attribute and set it to your domain name. Don’t change or add any other attributes. Save the file.
<asp:TextBox ID="Domain" runat="server" Text="Corp" CssClass="text-box" onfocus="showIndicator(this);" onblur="hideIndicator(this);"></asp:TextBox>
This will prepopulate the domain field text box with your domain name and still allow the user to change it, if that should be required.
Session timeout
By default the idle time session limit of the Director is 245 min. If you wish to change the timeout, here is how to do it.
Log on to the Director Server as an administrator
Open the ‘IIS Manager’
Browse to ‘\Sites\Default Web Site\Director’ in the left hand pane.
Open ‘Session State’ in the right hand pane
Change the ‘Time-out (in minutes)’ value under ‘Cookie Settings’
Click ‘Apply’ in the Actions list
SSL Check
From http://euc.consulting/blog/citrix-desktop-director-2-1: If you are not securing Director with an SSL certificate you will get this error at the logon screen.
To stop this:
Log on to the Director Server as an administrator
Open the ‘IIS Manager’
Browse to ‘\Sites\Default Web Site\Director’ in the left hand pane.
Open ‘Application Settings’ in the right hand pane
Set EnableSslCheck to false.
Disable Activity Manager
From docs.citrix.com: By default, the Activity Manager in Director displays a list of all the running applications and the Windows description in the title bars of any open applications for the user’s session. This information can be viewed by all administrators that have access to the Activity Manager feature in Director. For Delegated Administrator roles, this includes Full administrator, Delivery Group administrator, and Help Desk Administrator.
To protect the privacy of users and the applications they are running, you can disable the Applications tab from listing running applications.
On the VDA, modify the registry key located at HKLM\Software\Citrix\Director\TaskManagerDataDisplayed. By default, the key is set to 1. Change the value to 0, which means the information will not be displayed in the Activity Manager.
On the server with Director installed, modify the setting that controls the visibility of running applications. By default, the value is true, which allows visibility of running applications in the Applications Change the value to false, which disables visibility. This option affects only the Activity Manager in Director, not the VDA. Modify the value of the following setting:
UI.TaskManager.EnableApplications = false
Large Active Directory
From CTX133013 Desktop Director User Account Search Process is Slow or Fails: By default, all the Global Catalogs for the Active Directory Forest are searched using Lightweight Directory Access Protocol (LDAP). In a large Active Directory environment, this query can take some time or even time out.
In Information Server (IIS) Management, under the Desktop Director site, select Application Settings and add a new value called ActiveDirectory.ForestSearch. Set it to False. This disables searching any domain except the user’s domain and the server’s domain.
To search more domains, add the searchable domain or domains in the ActiveDirectory.Domains field.
Site Groups
From Citrix Blog Post Citrix Director 7.6 Deep-Dive Part 4: Troubleshooting Machines:
If there are a large number of machines, the Director administrator can now configure site groups to perform machine search so that they can narrow down searching for the machine inside a site group. The site groups can be created on the Director server by running the configuration tool via command line by running the command:
C:\inetpub\wwwroot\Director\tools\DirectorConfig.exe /createsitegroups
Then provide a site group name and IP address of the delivery controller of the site to create the site group.
Director – Multiple XenDesktop Sites
Run IIS Manager. You can launch it from Server Manager (Tools menu) or from the Start Menu or by running inetmgr.
On the left, expand Sites, expand Default Web Site, and click Director.
In the middle pane, double-click Application Settings.
Find the entry for AutoDiscoveryAddresses and double-click it.
If Director is installed on a Controller, localhost should already be entered.
Add a comma and the NetBIOS name of one of the controllers in the 2nd XenDesktop Site (farm). Only enter one Controller name. If you have multiple Director servers, you can point each Director server to a different Controller in the 2nd XenDesktop Site (farm).
According to Citrix CTX200543 Desktop Director Access Fails After XenDesktop 7.5 is Upgraded to 7.6, the addresses should be NetBIOS names, not FQDN. Click OK.
Director – Saved Filters
From Scott Osborne and Jarian Gibson at Citrix Discussions: In Director, you can create a filter and save it.
The saved filter is then accessible from the Filters menu structure.
The saved filters are stored on each Director server at C:\Inetpub\wwwroot\Director\UserData. Observations:
Each user has their own saved filters.
The saved filters are not replicated across Director servers. You can schedule a robocopy script to do this automatically.
When upgrading Director, the saved filters are deleted?
Director – Custom and Scheduled Reports
The Monitoring database contains more data than is exposed in Director. To view this data, the Monitoring service has an OData Data Feed that can be queried.
You can use Excel to pull data from the OData Data feed. See Citrix Blog Post – Citrix Director – Analyzing the Monitoring Data by Means of Custom Reports. This particular blog post shows how to use an Excel PivotChart to display the connected Receiver versions.
Or for Linqpad, see Citrix Blog Post – Creating Director Custom reports for Monitoring XenDesktop using Linqpad
Go to Citrix Blog Post Obtain XenDesktop Custom report through Citrix Director and download the tool. Once installed you can create custom reports from within Director.
Citrix Licensing Server
Upgrade
If you installed the Licensing Server that came with XenApp 7.6.1000, then it is already 11.13.1.2.
If you have a standalone Licensing Server, then install or upgrade it to 11.13.1.2.
Go to the 7.6.1000 ISO and run AutoSelect.exe.
Click Studio and Server Components to begin the upgrade.
In the Licensing Agreement page, select I have read, understand, and accept the terms and click Next.
In the Ensure a successful upgrade page, check the box next to I’m ready to continue and click Next.
In the Firewall page, click Next.
In the Summary page, click Upgrade.
In the Finish page, click Finish.
If you login to the license server web console, on the Administration tab, it shows it as version 11.13.1 build 16002.
You can also view the version in the registry at HKLM\Software\Wow6432Node\Citrix\LicenseServer\Install.
Licensing Server HA using GSLB
From Dane Young – Creating a Bulletproof Citrix Licensing Server Infrastructure using NetScaler Global Server Load Balancing (GSLB) and CtxLicChk.ps1 PowerShell Scripts. Here is a summary of the configuration steps. See the blog post for detailed configuration instructions.
Build two License Servers in each datacenter with identical server names. Since server names are identical, they can’t be domain-joined.
Install identical licenses on all License Servers.
Set the DisableStrictNameChecking registry key on all Citrix Licensing servers.
Synchronize the certificate files located at C:\Program Files (x86)\Citrix\Licensing\WebServicesForLicensing\Apache\conf. They must be identical on all Licensing Servers.
Download CtxLicChk.exe from http://support.citrix.com/article/CTX123935 and place on all Licensing Servers.
Schedule the PowerShell script CtxLicChk.ps1 on all Licensing Servers. Get this script from the blog post linked above.
Configure NetScaler:
Configure GSLB ADNS services.
Add wildcard Load Balancing service for each Citrix Licensing Server.
Configure service TCP monitoring for ports 27000, 7279, 8082, and 8083.
Create Load Balancing Virtual Server for each Licensing Server.
Set one Load Balancing Virtual Server as backup for the other.
Repeat in second datacenter.
Configure GSLB Services and GSLB Monitoring.
Configure GSLB Virtual Servers. Set one GSLB Virtual Server as backup for the other.
Delegate the Citrix Licensing DNS name to the ADNS services on the NetScaler appliances.
Configure Citrix Studio to point to the GSLB-enabled DNS name for Citrix Licensing.
Citrix License Server Monitoring
Citrix Licensing 11.13.1 and newer has historical usage reporting: <img src="https://s.w.org/images/core/emoji/72x72/1f4a1.png" alt="