kayak electric motor – click on the image below for more information.
Motor mount kit designed for Intex inflatable boats
Lets you attach up to 3.5-horsepower motors
Made of heavy duty composite with aluminum support arms
Attaches and detaches quickly; disassembles for storage
Compatible with most newer model Intex boats
kayak electric motor
Motor Mount Kit allows you the option to paddle for sit back and let the motor do the work for you. Attaches easily to Intex Boats and motor attaches easily to mount.Kick back and relax while cruising down the river on an Intex inflatable boat with this motor mount kit. The kit lets you attach up to a 3.5-horsepower motor to the rear of your Intex boat, so you can rest your paddling arms and float in comfort. The mount–which is made of heavy duty composite with aluminum support arms — attaches and detaches easily, so you don’t have to spend a half hour fussing with the components each time you want to use the motor. Plus, the mount disassembles quickly when you return back home for easy storage in your garage or closet. The motor mount kit is compatible with the following Intex inflatable boats: Challenger 2, 3 & 4 Seahawk 2, 3 & 4 Excursion 2, 3, 4 & 5 Mariner 400 Seahawk II
Low Price Of $ 22.99
Intex Motor Mount Kit
Click on the button for the lowest kayak electric motor price and reviews.
Read What Others Are Saying
Customer Reviews
23 of 23 people found the following review helpful
Just one flaw., October 5, 2007
By
W. Roger Brownlee “W. Roger Brownlee” (Bowie, MD United States) – See all my reviews
Verified Purchase(What’s this?)
Mine just arrived today, when I put it together I noticed that the holes in the wooden board that the motor attaches to are a little bigger than the washers provided. If you try to tighten the nuts the washers sink down into the board therefore not serving their purpose. I had to go to the hardware store to get bigger washers to fit. May be just mine but just thought you should know before you take it out. You may have to get bigger washers….I got a set of regular washers. Overall it serves its purpose and with .30 worth of washers it works fine.
0
Help other customers find the most helpful reviews
Was this review helpful to you?
>Report abuse
| Permalink
Comment (1)
24 of 27 people found the following review helpful
Well made, does what it should, July 5, 2009
By
Warspite2 (USA) – See all my reviews
This review is from: Intex Motor Mount Kit (Sports)
One thing I like about this mount, you don’t need any tools to put it on the boat. It uses bolts with sturdy thumb type screws and your done. Also, can’t go wrong with good solid marine plywood. In the end, its a motor mount and it does what it is designed to do for the intex boats. Holds that little Minn Kota Endura 30 really good. The mount can accept a 3.5hp but on the Excursion boats you can only put up to a 1.5hp or up to 18 lbs motor weight. If you want to go to a 3.5 you will need to get a Sea Hawk II or Mariner boat.
0
Help other customers find the most helpful reviews
Was this review helpful to you?
>Report abuse
| Permalink
Comments (2)
9 of 9 people found the following review helpful
Nice price, works ok but needs 1 improvement, September 22, 2011
By
chaconne – See all my reviews
Verified Purchase(What’s this?)
This review is from: Intex Motor Mount Kit (Sports)
This mount seems to work fine with my Intex Mariner 4 and Suzuki DF2.5 outboard, but when I throttle up to high, the thrust causes the two vertical pipes, attaching from below the lower boat mounts, to press into the boat and tip the motor back. I discovered that if you put a rigid plywood or plastic plate (4″x19″) between the back of the boat and these pipes, the motor has to push the whole plate into the back of the boat and this makes the mount much more rigid.
The price is so good ( as apposed to for Sevylor’s equivalent) that I decided to rate it 4 stars. With the above improvement, this mount should work fine.
0
Help other customers find the most helpful reviews
Was this review helpful to you?
>Report abuse
| Permalink
Comments (2)
Share your thoughts with other customers:
› See all 165 customer reviews…
var ue_pty='CustomerReviews', ue_spty='IFrameMostHelpful', ue_pti='iframe';
v