The 51st Paris Air Show
The first two days of the Paris Air Show gave participants aerial demonstrations from the AIRBUS A350, A380 and A400M; Dassault Aviation Rafale and Falcon 8X; the Boeing 787 Dreamliner and the Patrouille de France. Also launched at the Paris Air Show, Dassault Systèmes announced Build to Operate, a new Industry Solution Experience for aerospace and defense companies that aims to maximize manufacturing operations.
Global Manufacturing Efficiency
How does Build to Operate help manufacturers? For the past decade or so, large aviation OEMs have put a lot of effort in the design of increasingly composite aircraft. Given the growth in commercial aviation, aerospace manufacturers seek to implement more lean practices to improve program performance and equip global operations. One major way to improve performance is find a way to free data trapped in silos across the multitude of IT systems across the enterprise. Striving for lean manufacturing means having immediate access to information, removing labor intensive manual processes, and lower the risk to data integrity by eliminating the need to collect data over time and store it.
True manufacturing efficiency requires real-time data from across the enterprise. Essential to efficient and reactive manufacturing capability is the ability for all participants to work in unison, like a virtual symphony. Manufacturers must unite their global factories as one performing organization. This requires a platform that can integrate with other enterprise systems to ensure that all critical systems receive relevant shop-floor production information and support and synchronize global operations.
Build to Operate Provides Global Visibility and Control
Build to Operate helps both aerospace Original Equipment Manufacturers (OEMs) and large suppliers increase program efficiency and quality. Based on DELMIA Apriso, the solution offers Manufacturing Operations Management (MOM) capabilities to monitor, control and validate all aspects of manufacturing. This frees up manufacturers to focus on more strategic operations.
Manufacturing Operations Management includes a wide range of functions, but one major advantage is that it allows manufacturers to make fully informed decisions because they enjoy a full view of operations. A lack of visibility can have serious impact to manufacturing operations, so Control Center for complete oversight – especially across the extended enterprise. Because if you are unable to see where you are headed, the likelihood of making a decision that can adversely impact global support and synchronization is a real consideration, with real-world consequences.
Instant visibility on all levels of productivity—plant, line, station, cell and individual— is a critical enabler for continuous improvement. ‘Build to Operate’ brings this capability to existing production lines and accelerates the ramp-up of new lines to reach optimal rate. By receiving all required data, plant managers can view, control and execute automated manufacturing operations through sensors in real time.
The Build to Operate solution offers the ability to monitor, control and validate all aspects of global manufacturing operations – all with digital precision. These capabilities range from replicable processes and production sequences, to the flow of deliverables throughout their supply chain.
Having these competencies allows manufacturers to manage global material supplies, logistics execution and production operations in one site and then execute across all global sites. Visibility into operations (both within a single plant and across all plants) results in better alignment with business performance targets, including WIP and Labor.
Enable the Future Factory Today
Build to Operate increases the efficiency of manufacturers’ existing lines and accelerates the production ramp up of new ones to enable future factory innovations, today. Michel Tellier, Vice President, Aerospace & Defense Industry, Dassault Systèmes explains,
Aerospace companies implementing this ‘factory of the future’ today can expect benefits that include as much as a 25 percent reduction in errors, 20 percent less waste and up to a 15 percent improvement in first-time quality.”
Another announcement at the Paris Air Show was Air Bus Helicopter sharing its objective for the solution.
“We adopted Dassault Systèmes’ Build to Operate industry solution experience to improve manufacturing execution for our existing and future helicopters programs,” said Jean-Luc Sturlèse, Vice President, Production Flows Management, Airbus Helicopters. “By tightly unifying engineering with our change management process, and by implementing lean processes like just-in-time processing and paperless manufacturing, we aim to improve quality and accelerate production while lowering program costs.”
Read more about Build to Operate for aerospace and defense companies: http://www.3ds.com/industries/aerospace-defense/build-to-operate/
Or, visit us at The International Paris Air Show at Parc des Expositions | June 15, 2015 to June 21, 2015 Booth #F183 /Hall 2B.
Ellen Mondro
Married to aerospace & defense, I write about and develop go to market strategy for @3dsaerospace solutions. It’s an honor to work in an industry and with the companies who use technology to create advancements in space, aviation and security. In my precious free time you’ll find me enjoying warm weather, watching my kids’ baseball games and spending time with family and friends. Countdown to Paris International Air Show 2015