Description:
This quad was purchased brand new from Canyon Honda 100% box stock. The quad has 31 hours time on the clock from the day it was brought home new.It was brought home then stripped to the frame and built up as it is now with zero time on the clock.The approach was speed through suspension technology rather then unreliable HP. I found the limiting factor on any stock quad essentially came down to running the suspension as fast as I could. The end result is a bike that will float over wash board trails
At 70mph and will climb the steepest hills like a mountain goat on crack; while delivering sure footed confidence and drivability to the most novice of riders by means of suspension technology and a smooth torque curve.The components of this build were intended to work together to create a machine beyond the sum of its individual parts. Included in this auction is the Sony laptop used for real time plug in OR to download saved data from a run… RPM/SHIFTS/FUELtoAIR RATIOS/ ETC. combined with ground speed, altitude, distance and terrain via GPS.
Every receipt will be included with the quad and here is a list of a few of the components.
*Two sets of wheels and tires: (DIRT) Hyper carbon fiber wheels with ITP Hole Shot tires, (SAND) ITP aluminum wheels with ITP Sand Star tires.
Houser +2.5” long travel A-Arms in black
Steel braded brake lines front and back
Motul RBF 600 brake fluid
Elka Elite series fully adjustable long travel suspension all the way around set up at the factory for a 200 pound rider. Dual sport valving.
Elka system 5 steering stabilizer
Houser chrome +2.5 tie rods
Cascade billet aluminum brake line brackets
IMS-ROLL Design front push bar in textured black
Houser +1” chrome steering stem
Houser 1-1/8” oversized steering clamp w/ anti vibration dampers
FATBAR handle bars in textured black (combined with the +1” steering stem this yields perfect ergonomics for a 6’ rider)
Trail Tech QD steering clamp mount
Trail Tech dual HID lighting 1) spot for terrain and 1) flood for area.
Trail Tech wiring/switch kit
Pro Design kill switch with extra lanyard
Renthal steering clamp pad custom fitted over the top of the kill switch
ISV Pro C15 series top of the line CLUTCH/BRAKE/HOT START finished in red anodized
Spider grips in gray/black mounted with Renthal grip glue
Honda CRF450 hot start cable
ISV lever clamps in matching red anodizing
Power Madd full hand guards in gray over black
GPS adjustable ram mount
Garmin color/back lit LCD shock proof GPS unit
Garmin topo software for altitude and terrain changes
Billet aluminum fuel cap with fuel level sight glass
$500 custom graphics & gripper seat cover, black/white chaos nightmare collage of mad scientists, clowns, demons, hot chicks etc. fun for the whole family
Maier plastics in silver/gray
Custom number plates with carbon fiber back ground, easily peel off unless #25 is your number too J
ITP Aluminum side ducts for increased air movement through radiator
ESR billet aluminum shock proof coolant temp gauge finished in red anodizing
Engine ICE coolant
Billet accordion in-line auxiliary cooler
HONDA RACING performance kit, cams, intake parts etc.
ESR clutch cover adding additional oil volume.
Billet oil caps
ESR billet brake reservoir cap
IMS-ROLL gear lever
IMS-ROLL rear brake pedal
IMS-ROLL deluxe foot pegs
ESR motor mounts
White brothers 100% TITANIUM header, light as a feather not to be mistaken for the common SS type that comes with the carbon pro.
White brothers carbon pro Carbon fiber exhaust
Custom TITANIUM oxygen sensor bung professionally welded in a zero oxygen chamber
Bosch wide-band o2 sensor, dyno grade
(on board dyno) DynoJet Wide Band commander, custom zero sound harness to reliably run off the stock stator, size and weight of a deck of playing cards. Custom aviation switch for real time data logging on/off.
Sony Viao laptop and carry case includes data cord for real