I was thinking about getting the Black & Decker however couldn't legitimize the value as it was almost four times the price of the Bosch. And it’s easier to find Bosch parts than Black & Decker parts. I have had numerous Bosch hand instruments throughout the years and never had an issue, so I ran with the 1594K. I utilize this hand planer basically for light development - leveling joists, straightening studs, and so on so a Festool would have been needless excess. I am totally fulfilled by this 1594K. It cuts a tremendous measure of wood off and the shavings extraction lives up to expectations viably. It's an extraordinary instrument.
Maybe a couple of pointers may demonstrate how good this planer is:
• I don't utilize the Bosch VAC002 connector to connect it with a 2.5 inch shop vacuum hose. I observed that 2.5 inch hose was excessively substantial and awkward for hand devices. I want to utilize the Fein 921072K13 step adapter for the 1/4 inch hose. The Fein connector is a great deal more helpful in my shop. I have a few of these in the shop for use with Festool, Makita, Milwaukee and Bosch power tools and they function admirably in all cases. They are exceedingly solid in view of the fortified elastic they're made of and you can buy them on Amazon for around $8.50 with shipping included which is almost the same price as the Bosch. Note that, for the Bosch 1594K, you will have to make the cut after step 2 on the Fein connector.
• I just utilize the Bosch Woodrazor micrograin tungsten carbide blades which are stock blades for 1594K. They are reasonably priced as substitution is Bosch PA1202 Pair of Woodrazor Tungsten Carbide Planer Blades which you can buy on Amazon below $15.00. The main drawback is that they can't be re-sharpened. So if re-sharpening is required, you'll need to arrange the Bosch 1204 or 1205 HSS blades and 1206 HSS blades leveling tool and make the transformation yourself.
• Guide fence that comes with 1594K appears to be fine for standard woodworking jobs, yet is a bit excessively wobbly for completion work as I would like to think. The park rest is a decent element. Laying the 1594 on the heel keeps the blade far from the material if set on level surface. I'd have outlined it so that the blade halted in a sheltered position, however that is just me.
In the packaging, the proprietor’s manual that I got showed up as though it had been photocopied from old material. My other Bosch manuals were imprinted on more sturdy paper. I assume that the paper itself was produced in a third world nation. The manual is fine and the instructions are given in different languages, it's just the quality of the paper that is less than impressive. I believe that Bosch ought to return to their manual-printing outsourcing contracts. It might be that the planer was made in the third world, though it's still an awesome device. Yet I’m not certain that it's further bolstering Bosch's good fortune to recommend that to the buyer.
Above points just prove that the 1594K is an extraordinary planer and should be a no brainer for most of the handymen. ToolpartsPro.com offers a wide range of Air Locker Parts, Bosch Parts, Black and Decker Parts on lowest online prices.
Category:
DIY and How to's