As posted here:
http://tl.acurazine.com/forums/showt...7#post14778477
I have explained what happened to this car and why I am selling these parts. The majority of the parts (including brakes and suspension) were on the car for 5K miles.
DO NOT PM ME ASKING FOR OTHER PARTS NOT LISTED
SOME PARTS IN THE BUILD THREAD HAVE ALREADY BEEN SOLD OR ARE NOT AVAILABLE FOR SALE
RON A EDIT: HUGE THREAD SO I AM GOING TO ADD, FOR CLARITY AND BECAUSE I ALMOST MISSED THEM:
PICTURES ARE IN POST #2
PRICES ARE IN POST #3
Exterior
TL 07/08 Base & Type S Parts
07/08 Mirrors w/ extended wires painted AM (had a chip, been touched up)
07/08 Type S Rear license plate frame with chrome strip (this has been modified to fit 04’s)
07/08 Type S Rear bumper w/ Lip Painted AM (has some scratches on the lip, w/ hardware)
07/08 Type S Tail Lights & Sidemarkers (New driver light, everything else been clear bra’d)
These are the lighter version (I compared them to another set)
07/08 Type S Front Lip Painted AM (has some scratches comes with all hardware)
07/08 Type S Front Conversion Parts
Front Grille Mesh, Emblem, Hood trim (blemish), screws, pass fog cover
04-06 AM A-Spec Side Skirts (Pass and Driver Rear have scratches)
04-08 Sarona Roof Spoiler Painted AM (2 rolls of Loctite Powerband applied)
-New 07/08 C-Mod Grille Wrapped w/ an 04 OEM Hood Trim in Matte Black Vinyl- NEW
-Comes w/ C-Mod Hood Trim
-Fits BOTH Base and Type S
New Carbon Creations Hood, Wrapped w/ 1 piece of clear bra (top corners are peeling)
Suspension
Tein SS Coilovers w/ Type S Top Hats EDFC (this is a complete setup)
Ingalls Front & Rear Camber Kit
Front ball Joints on stock arms +/- 1.5
Rear Trailing arms
H&R Front and Rear Sway Bars STILL ON CAR
Ultra Chassis Bracing
Front Subframe Brace powder coated red STILL ON CAR
Side Floor Bars powder coated red
Rear subframe brace new in plastic
PCI LCA Spherical bearings in stock LCA’s
-Used in Good Condition Stock LCA Bushings
Engine Dress Up
OEM ITR Powder Coated J32A3 Valve Covers (These are one of a Kind) STILL ON CAR
Matching FLP for 04-08 TL can use with EDFC
Interior
Custom CF Wrapped OEM Interior Parts (one of a kind)
04-06 Cluster Bezel
04-08 Fuel Door release (was originally gray, not visible when installed)
04-08 Steering column (driver side has broken tabs, creates a small gap when installed)
04-06 Steering wheel buttons
04-08 Fuse Box Lid in engine Bay (has a scratch)
04-08 OEM CF Doors, driver vent, pass dash trim, center console rails
OEM Carbon Fiber Rear Vents (has a scratch on the corner)
OEM Trunk Net (for the side where Nav DVD player is, right if looking into trunk)
Engine
04-06 Gerzand PNP Intake Manifold w/ Maxbore TB (TB has machined shaft & Screws)
Comes w/ Both P2R TB & IM gasket
-Stock J32A3 Valve Springs & Retainers
-Stock J32A3 Crank
-Stock J32A3 Cams
-XLR8 Engine Mounts (65A Bushings) STILL ON THE CAR
Lights
04/05 JNC Headlights
-Darkness Theme (which I helped Create)
-Matte Black V2
-Fog Light Bulb Covers
-Gloss Black
-Bezel
-Chrome Strip
-Type S Diffuseres
-Real ZKW Lenses
-Hybrid TL Projectors
THESE WERE REPAIRED BY JNC and will directly ship from him
-Two outside tabs have been repaired, fully functional may be better than OEM
-The pass light tab broken and was repaired (this headlight is clear bra’d)
-The driver light was replaced with a used light
-Only the ZKW Lens and Type S diffuser were reused
-The lens has been refinished by JNC
Luminics Yellow H8 Fog Lights 12V 35W
Luminics Yellow 9006 Fog Lights
New Stock Bulbs that came with Depo Foglights
Wheels (No tires at this time)
TE37 SL 18X9.5 +22
Comes w/ Original boxes, stickers, valve stems, wheel covers
Can include: black center cap adapters, lug nuts below
-Racing Sciences Center Cap Adapters for TE37 SL with 73.1 Bore
-Used Rays Lug Nuts with key- Fake very Close to Real
-New Fake Rays Lug nuts in package with key
-Real Rays Lug Nuts & Valve Stems-Very Faded will need to be reanodized
-SSR Lug Nut Adapters- Allows you to use aftermarket lugs (acorn) with stock wheels (ball)
Brakes
Rear BBK Custom Red Power coat w/ matte black Acura decal
SS Lines, Bracket, Calipers, Pads, Slotted 2 Piece rotors
-Custom Red Powder Coated Brembo’s w/ matte black Acura Decals
-Stoptech FR (For Brembo) Cross drilled and Slotted Rotors
-127.40062RL with Silver Anti Corrosion
-Hawk Performance Brake pads- Part # HB530N.570
Other
Custom Cut Clock (fits 9500ci Radar Screen w/out blue cover)
Custom iPad Mini Bezel
Aux Port
iPad mini of your choice
Paint or Plasti Dip
Stretched AC Display
-2007-08 TL Ignition part (the black piece goes behind the immobilizer, this is not sold separately by Honda/Acura, sold only with the complete ignition)
-SuperComputers Automatic Brake Pedal with hardware (I only have the brake pedal)
-Base 3G TL Exhaust inserts
-Hondata Complete Plug and Play for 04/05 MT with 07 MT Type S ECU
-Either Send me your already cut Switchbalde
-Send me your stock key, I will reblade and recut the switchblade
-Fully Built Engine
Made 264WHP in Denver on a Mustang Dyno
-STILL IN THE CAR
Parts that are still on the car will be removed when the engine is taken out. I do not currently have a set date for this. Should be within the next month or two, some parts will come out sooner (valve covers, rear sway bar).
All Prices include Paypal fees & shipping to the lower 48 states unless stated otherwise
It may take me a few days to ship the larger items.
Pictures and pricing to follow