New Rockwell Sonicrafter Models: Faster and Powerful
Rockwell’s next generation of Sonicrafter oscillating tools have been redesigned with and increased oscillating angle and more power to cut faster. The Rockwell Sonicrafter Oscillating Tool F50 new design is more tapered and compact, plus the accessory count for each model has increased for added value and applications.
What’s Changed?
According to Pete Denley, Rockwell’s product manager. “A third party testing facility ran Sonicrafters against other major oscillating tools in the marketplace. They concluded that Sonicrafters withstand more force while cutting than any other brand.”
Increased Power and Cutting Angle
Rockwell By increasing the tools’ power and oscillating angle, resulting in the Rockwell Sonicrafter Oscillating Tool F50 cutting five times faster than the Sonicrafter RK5121K.
This increased oscillating angle and power have resulted in the RK5141K F50’s having a maximum cutting load of 35 lbs., compared to RK5131K 30 lbs. for the F30 and 21 lbs. for the RK5121K.
Most oscillating tools have an oscillating angle of 3.2°. Rockwell’s Sonicrafters (F50, RK5141K and F30, RK5131K) now feature angles of 5.0° and 4.0°, respectively.
The Sonicrafter F50 model (RK5141K) is 4.0 amps, while the F30 (RK5131K) registers at 3.5 amps. Additionally, these tools offer electronic constant speed control that maintains the tool’s cut rate under load.
Rockwell engineers designed a counterweight in these new tools to offset this vibration caused by the increased cutting angle allowing for a smoother, more efficient cut.
Pushing The Tool Harder
Rockwell says that this means users can push these tools harder before the blade stalls out.
At Concord Carpenter we feel most people push too hard on the tool and cause massive heat build up which prematurely dulls the blade. The user should not push the tool to hard but to incorporate movement in the cutting action.
Dont Push – Move!
The trick to an oscillating tool is to allow the weight of the tool to do the cutting, apply correct pressure to the material your cutting, and apply blade movement.
Multi-tools vibrate and have a micro short stroke which by design do not remove waste from the blade kerf. If you rock the tool back and forth, pull the blade out of the kerf or cut along a line evenly as well as apply pressure the cut waste will find a way out. This keeps the kerf clean, the blade cooler and lessens the chance for you to burn your blade.
Tool-less Blade Change:
The new Rockwell Sonicrafter oscillating tools feature a spring-loaded centering mount that positively engages accessories with the help of the Hyperlock™ tool-less blade change system.
Hyperlock is available on the new Sonicrafter models:
F50, RK5141K, 4 amp
F30, RK5131K, 3.5 amp
RK5121K, 3 amp
20V, RK2863K
Sonicrafter F50 (RK5141K, $139)
The most powerful and fastest cutting Sonicrafter
5.0° oscillating angle
Vibrafree (Vibration reduction)
Variable speed
4.0 amp motor
5X* faster cutting *(compared to the Rockwell model RK5121K)
35 lbs. max cutting load
Hyperlock tool-less blade change
Universal accessory interface
Constant speed control, which electronically maintains speed-of-cut under load.
Oscillations per minute (OPM): 11,000-20,000
Metal front-end; metal Hyperlock tool-free lever
LED light
Weight: 3.3 lbs.
Cord length: 10 ft.
34 Universal Fit accessories include (4) 1-3/8” end-cut blades, (1) metal, (2) precision, (1) standard), (1) 3-1/8” HSS semicircle saw blade, (1) rigid scraper blade, (1) sanding pad, (26) sanding sheets, plus hard case.
Warranty: 3 years
Sonicrafter F30 (RK5131K, $119)
4.0° oscillating angle
Vibrafree (Vibration reduction)
3.5 amp motor
Variable speed
3X* faster cutting *(compared to the Rockwell model RK5121K)
30 lbs. max cutting load
Constant speed control, which electronically maintains speed-of-cut under load.
Hyperlock tool-less blade change
Universal accessory interface
Oscillations per minute (OPM): 11,000-20,000)
Weight: 2.9 lbs.
Cord length: 10 ft.
32 Universal Fit accessories include (3) 1-1/8” end-cut blades (metal, precision, standard), (1) rigid scraper blade, (1) sanding pad, (26) sanding sheets, plus hard case.
Warranty: 3 years
Sonicrafter (RK5121K, $79)
3.2° oscillating angle
Variable speed
3.0 amp motor
21 lbs. max cutting load
Hyperlock tool-less blade change
Universal accessory interface
Oscillations per minute (OPM): 11,000-21,000
Weight: 2.9 lbs.
Cord length: 10 ft.
31 Universal Fit accessories include (2) 1-1/8” end-cut blades, (1) rigid scraper blade, (1) sanding pad, (26) sanding sheets, plus carrying bag.
Warranty: 3 years
20V Sonicrafter (RK2863K, $159)
3.2° oscillating angle
20V Lithithium-ion battery
Variable speed
Hyperlock tool-less blade change
Universal accessory interface
Oscillations per minute (OPM): 5,000-20,000
LED light
Weight: 3.1 lbs. (w/battery)
27 Universal Fit accessories include (1) 1-1/8” standard wood end cut blade, (1) 3/8” Bi-metal end cut blade, (1) 3-1/8” HSS semi-circle blade, (1) rigid scraper blade, (1) sanding pad, (20) sanding sheets, (1) Carbide semicircle (grout) blade, (1) 20V lithium-ion battery, (1), 30-minute charger, plus carrying bag.
Warranty: 3 years
ShopSeries Sonictool (SS5121, $49)
2.5 amp motor
Variable speed dial for precise control
Built-in dust port
Oscillations per minute (OPM): 11,000-20,000
Oscillating angle (degrees): 3.2”
Weight: 3.2 lbs.
Cord length: 7 ft.
Six (6) accessories include (1) 1-3/8” standard wood end cut blade, (1) sanding pad, (3) sanding sheets, (1) dust extraction adapter. Plus (1) Allen key
Warranty: 2 years
A Rockwell hard case is included with the Rockwell Sonicrafter Oscillating Tool F50 (RK5141K) and Sonicrafter F30 (RK5131K).
The new Rockwell Sonicrafter will be available in Fall 2014 at Lowes or other select major retailers.
Win A Rockwell Sonicrafter Oscillating Tool F50
In order to enter this giveaway you must follow the instructions below:
Subscribe to or be a subscriber to A Concord Carpenter’s weekly newsletter.
Enter your information in the entry form below.
Extra Entries:
If you would like to increase your chances to win with EXTRA entries. I allow five extra entry points for each one or of the following. [Note - repetitive entries with different email address will be deleted]
1. “LIKE” Rockwell Tools on Facebook
2. “LIKE” ConcordCarpenter on Face Book
3. Follow ConcordCarpenter on Twitter and Tweet and tag the giveaway
4. Subscribe To AConcordCarpenter’s YouTube Channel
Entry Dates:
Giveaway ends on August 30 at 11:59 p.m. EST. Winner will receive an email and be announced on Face Book on that week, winner must respond within 48 hours of first notification to claim prize. Tool will be shipped when available. Open to 18 yrs old, residents of U.S. and Canada.
The post Rockwell Sonicrafter Oscillating Tool F50 appeared first on A Concord Carpenter.